Si-tolerance of iron doped Pt/alumina catalyst in the total oxidation of VOC

Summary In the present study the effects of addition of iron on the catalytic activity and Si tolerability of Pt/g-Al₂O₃in the total oxidation of volatile organic compounds were investigated. Preliminary results showed that there is a noticeable improvement effect on Si-tolerance of catalyst, particularly for short term poison exposure. Bulk analysis of deposited silicon on the catalyst surface indicated that both Pt/g-Al₂O₃and iron-doped pellets had roughly the same silicone uptakes. Deactivation of catalyst was reversible and much faster for iron doped sample. The promoting effects of iron were related to its electronegativity and, to blocking of fewer Pt sites when iron is present at the surface of the catalyst.     

Spectrophotometric determination of beryllium in water samples after micelle-mediated extraction preconcentration

A new micelle-mediated phase preconcentration method for preconcentration of ultra-trace quantities of beryllium as a prior step to its determination by spectrophotometry has been developed. Chrome Azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) were used as chelating agent and cationic surfactant, respectively. The method evaluates and eliminates the blank bias error present in such procedures using mean centering of ratio spectra. This procedure gives more accurate results than the traditional approach using absorbance values against reagent blank. The optimal extraction and reaction conditions were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.9-18.0 ng mL⁻¹ (1.00 × 10⁻⁷-2.00 × 10⁻⁶ mol L⁻¹) of beryllium. The detection limit of the method is 0.51 ng mL⁻¹ (5.66 × 10⁻⁸ mol L⁻¹) of beryllium. The interference effect of some anions and cations was also tested. The method was applied to the determination of beryllium in spring water samples.     

Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead

A novel selective membrane electrode for determination of ultra-trace amount of lead was prepared. The PVC membrane containing N,N′-dimethylcyanodiaza-18-cown-6 (DMCDA18C6) directly coated on a graphite electrode, exhibits a Nernstian response for Pb²⁺ ions over a very wide concentration range (from 1.0×10⁻² to 1.0×10⁻⁷ M) with a limit of detection of 7.0×10⁻⁸ M (∼14.5 ppb). It has a fast response time of ∼10 s and can be used for at least 2 months without any major deviation in potential. The electrode revealed very good selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions. The proposed sensor was used as an indicator electrode in potentiometric titration of lead ions and in determination of lead in edible oil, human hair and water samples. The proposed sensor was found to be superior to the best Pb²⁺-selective electrodes reported in terms of detection limit and selectivity coefficient.     

Neue Derivate der 2-Acylamino-thiophen-(und-benzo[b]thiophen-)-3-carbonsäure sowie des ([1]Benzo-)Thieno[2,3-d]-pyrimidin-4(3H)-ons

The title substances1 and2 were prepared by acylation of the corresponding ethyl 2-amino-thiophene- (or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxylates, in some cases followed by reactions introducing a basic substituent.Additionally a group of 2-aroylamino-thiophene-(or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxamides was subjected to ring closure reactions, yielding the corresponding 2-aryl-thieno[2,3-d]pyrimidin-4(3H)-ones and 2-aryl-[1]benzothieno[2,3-d]pyrimidin-4(3H)-ones (both:3).

---

---

Zum Teil unter Mitarbeit vonFerdinand Fuhrmann     

Indirect simultaneous kinetic determination of semicarbazide and hydrazine in micellar media by H-point standard addition method

H-point standard addition method (HPSAM) is suggested as a simple and selective method for the determination of semicarbazide and hydrazine. The reduction of Cu²⁺ to Cu⁺ by semicarbazide and hydrazine in the presence of neocuproine (Nc) and the subsequent complex formation between Cu⁺ and Nc produced a sensitive spectrophotometric method for indirect determination of semicarbazide and hydrazine. The difference in the rate of reduction of Cu²⁺ with semicarbazide and hydrazine in cationic micellar media is the basis of this method. Semicarbazide can be determined in the range of 0.5-3.75 μg ml⁻¹ with satisfactory accuracy and precision in the presence of excess hydrazine. The proposed method was successfully applied to the simultaneous determination of semicarbazide (0.5-3.75 μg ml⁻¹) and hydrazine (0.5-5 μg ml⁻¹) and also to the selective determination of semicarbazide in the presence of hydrazine in several synthetic mixtures containing different concentration ratios of semicarbazide and hydrazine.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

Carbon dots with strong excitation-dependent fluorescence changes towards pH. Application as nanosensors for a broad range of pH

In this study, preparation of novel pH-sensitive N-doped carbon dots (NCDs) using glucose and urea is reported. The prepared NCDs present strong excitation-dependent fluorescence changes towards the pH that is a new behavior from these nanomaterials. By taking advantage of this unique behavior, two separated ratiometric pH sensors using emission spectra of the NCDs for both acidic (pH 2.0 to 8.0) and basic (pH 7.0 to 14.0) ranges of pH are constructed. Additionally, by considering the entire Excitation–Emission Matrix (EEM) of NCDs as analytical signal and using a suitable multivariate calibration method, a broad range of pH from 2.0 to 14.0 was well calibrated. The multivariate calibration method was independent from the concentration of NCDs and resulted in a very low average prediction error of 0.067 pH units. No changes in the predicted pH under UV irradiation (for 3 h) and at high ionic strength (up to 2 M NaCl) indicated the high stability of this pH nanosensor. The practicality of this pH nanosensor for pH determination in real water samples was validated with good accuracy and repeatability.