1H detection in MAS solid-state NMR spectroscopy of biomacromolecules employing pulsed field gradients for residual solvent suppression

In this communication, we demonstrate the feasibility of 1H detection in MAS solid-state NMR for a microcrystalline, uniformly 2H,15N-labeled sample of a SH3 domain of chicken alpha-spectrin, using pulsed field gradients for suppression of water magnetization. Today, B0 gradients are employed routinely in solution-state NMR for coherence order selection and solvent suppression. We suggest to use gradients to purge water magnetization which cannot be suppressed using conventional water suppression schemes. The achievable gain in sensitivity for 1H detection is in the order of 5 compared to the 15N detected version of the experiment (at a MAS rotation frequency of 13.5 kHz). We expect that this labeling concept which achieves high sensitivity due to 1H detection, in combination with the possibility to measure long range 1H-1H distances as we have shown previously, to be a useful tool for the determination of protein structures in the solid state.     

SPOCC-194, a new high functional group density PEG-based resin for solid-phase organic synthesis

A novel polymer matrix for solid-phase synthesis, SPOCC(194) resin (1), was designed featuring a backbone of homogeneous tetraethylene glycol (TEG(194)) macromonomer linked by quaternary carbon junctions and terminating in primary alcohol functionality. Beaded SPOCC(194) resin was effectively prepared by suspension polymerization of oxetanylated TEG macromonomer 5 in stirred silicon oil. Mechanically stable and inert to a diverse range of reaction conditions, SPOCC(194) possessed a high hydroxyl group loading (0.9-1.2 mmol/g) for substrate attachment and swelled effectively ( approximately 2-4 mL/g) in a variety of organic and aqueous solvents. Developed for solid-phase synthesis at high reactant concentrations for driving organic and aqueous reactions to completion, SPOCC(194) exhibited high functional group density (mmol/mL) similar to that of low-loaded aminomethylated polystyrene-divinylbenzene copolymer (PS-1%DVB) yet significantly higher than that of PEGA(1900), SPOCC(1500), and TentaGel S. High-resolution MAS NMR spectra of Fmoc-derivatized SPOCC(194) indicate that monitoring of functional group transformation is possible. Moreover, by employment of a nonaromatic resin-linker combination, electrophilic chemistry, such as Lewis acid catalyzed glycosylation and Friedel-Crafts acylation, was selectively performed on substrate bound to SPOCC(194) resin. Such properties make SPOCC(194) resin a promising new polymer matrix for the support-bound construction of small organic molecules by parallel and combinatorial synthesis and the scavenging of solution-phase reactants or byproducts.     

Evidence for Non-Innocence of a β-Diketonate Ligand

β-Diketonates, such as acetylacetonate, are amongst the most common bidentate ligands towards elements across the entire periodic table and are considered wholly redox-inactive in their complexes. Herein we show that complexation of 1,1,1,5,5,5-hexafluoroacetylacetonate (hfac⁻) to Cr^II spontaneously affords Cr^III and a reduced β-diketonate radical ligand scaffold, as evidenced by crystallographic analysis, magnetic measurements, optical spectroscopy, reactivity studies, and DFT calculations. The possibility of harnessing β-diketonates as electron reservoirs opens up possibilities for new metal–ligand concerted reactivity in the ubiquitous β-diketonate coordination chemistry.     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

A new method for assigning common spot boundaries for multiple gels in two-dimensional gel electrophoresis

The benefits of defining common spot boundaries when several gels from 2-DE are compared and analyzed have lately been stressed by both commercial software producers and users of this software. Though the importance of common spot boundaries is clearly stated, few reports exist that target this issue explicitly. In this study a method for defining common spots boundaries is developed, called the spot density method. The method consists of the following steps: segmentation and spot identification on each individual gel, transferring the spot-center coordinates for all gels onto a single new gel, collecting spot centers clustered together in the new gel and finally assigning pixels and new spot boundaries based on the spots in each cluster. The method is compared to a synthetic gel approach, and validated by visual inspection of three representative areas in the gels. The gel images need to be aligned prior to segmentation and spot identification, but the method can be used regardless of the choice of segmentation procedure. This makes the method an easy extension to existing methods for spot identification and matching. Conclusions based on the visual inspection are that the spot density method identifies partly overlapping spots and low-intensity spots better than the synthetic gel approach.     

Cell shape and spreading of stromal (mesenchymal) stem cells cultured on fibronectin coated gold and hydroxyapatite surfaces

In order to identify the cellular mechanisms leading to the biocompatibility of hydroxyapatite implants, we studied the interaction of human bone marrow derived stromal (mesenchymal) stem cells (hMSCs) with fibronectin-coated gold (Au) and hydroxyapatite (HA) surfaces. The adsorption of fibronectin was monitored by Quartz Crystal Microbalance with Dissipation (QCM-D) at two different concentrations, 20 μg/ml and 200 μg/ml, and the fibronectin adsorption experiments were complemented with antibody measurements. The QCM-D results show that the surface mass uptake is largest on the Au surfaces, while the number of polyclonal and monoclonal antibodies directed against the cell-binding domain (CB-domain) on the fibronectin (Fn) is significantly larger on the (HA) surfaces. Moreover, a higher number of antibodies bound to the fibronectin coatings formed from the highest bulk fibronection concentration. In subsequent cell studies with hMSC's we studied the cell spreading, cytoskeletal organization and cell morphology on the respective surfaces. When the cells were adsorbed on the uncoated substrates, a diffuse cell actin cytoskeleton was revealed, and the cells had a highly elongated shape. On the fibronectin coated surfaces the cells adapted to a more polygonal shape with a well-defined actin cytoskeleton, while a larger cell area and roundness values were observed for cells cultured on the coated surfaces. Among the coated surfaces a slightly larger cell area and roundness values was observed on HA as compared to Au. Moreover, the results revealed that the morphology of cells cultured on fibronectin coated HA surfaces were less irregular. In summary we find that fibronectin adsorbs in a more activated state on the HA surfaces, resulting in a slightly different cellular response as compared to the fibronectin coated Au surfaces.     

Fibronectin adsorption on tantalum: the influence of nanoroughness

The complex mechanisms of protein adsorption at the solid-liquid interface is of great importance in many research areas, including protein purification, biocompatibility of medical implants, biosensing, and biofouling. The protein adsorption process depends crucially on both the nanoscale chemistry and topography of the interface. Here, we investigate the adsorption of the cell-binding protein fibronectin on flat and nanometer scale rough tantalum oxide surfaces using ellipsometry and quartz crystal microbalance with dissipation (QCM-D). On the flat tantalum oxide surfaces, the interfacial protein spreading causes an increase in the rigidity and a decrease in the thickness of the adsorbed fibronectin layer with decreasing bulk protein concentration. For the tantalum oxide surfaces with well-controlled, stochastic nanometer scale roughness, similar concentration effects are observed for the rigidity of the fibronectin layer and saturated fibronectin uptake. However, we find that the nanorough tantalum oxide surfaces promote additional protein conformational changes, an effect especially apparent from the QCM-D signals, interpreted as an additional stiffening of the formed fibronectin layers.     

Reversible luminescence switching of a redox-active ferrocene-europium dyad

The copper-catalyzed cycloaddition reaction between a propargyl-appended europium complex and azidomethylferrocene yields a d-f dyad whose photophysical properties can be reversibly switched by varying the oxidation state of the ferrocene chromophore.