Synthesis of a new class of azathia crown macrocycles containing two 1,2,4-triazole or two 1,3,4-thiadiazole rings as subunits

A series of new 1,2/1,3-bis[o-(N-methylidenamino-5-aryl-3-thiol-4H-1,2,4-triazole-4-yl)phenoxy]alkane derivatives 3a-d and bis[o-(N-methylidenamino-2-thiol-1,3,4-thiadiazole-5-yl)phenoxy]alkanes 6a-c were prepared by condensation of 4-amino-5-(aroyl)-4H-1,2,4-triazole-3-thiols 2a-b or 2-amino-5-mercapto-1,3,4-thiadiazole with bis-aldehydes 1a-c. Further reaction of compounds 3a-d and 6a-c with dibromoalkanes afforded the new macrocycles 5a-f and 8a-d. The cyclization does not require high dilution techniques and provides the expected azathia macrocycles in good yields, ranging from 55% to 68%.     

Dehydration kinetics of polyvinyl alcohol hydrogel wound dressings during wound healing process

<正>The hydrogel wound dressing based on polyvinyl alcohol(PVA) was prepared by the freezing-thawing cyclic method.The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathematical modeling based on diffusion mechanism.The results show that the dehydration rate of PVA hydrogel wound dressing inversely depends on the hydrogel thickness as well as water content of the wound.On the other hand,the initial water content of hydrogel and the atmospheric humidity have little direct effect on the dehydration rate.The good agreement between experimental and mathematical modeling results in early stages of dehydration process shows that the predominate factor determining the dehydration of these wound dressings is diffusion.     

Module derivation problem for inverse semigroups

The derivation problem for a locally compact group G asserts that each bounded derivation from L ¹(G) to L ¹(G) is implemented by an element of M(G). Recently a simple proof of this result was announced. We show that basically the same argument with some extra manipulations with idempotents solves the module derivation problem for inverse semigroups, asserting that for an inverse semigroup S with set of idempotents E and maximal group homomorphic image G _S , if E acts on S trivially from the left and by multiplication from the right, any bounded module derivation from ? ¹(S) to ? ¹(G _S ) is inner.     

Cinnamoylphenethyl amides from Polygonum hyrcanicum possess anti-trypanosomal activity

A methanolic extract from aerial parts of Polygonum hyrcanicum (Polygonaceae) showed high activity against Trypanosoma brucei rhodesiense (IC50 = 3.7 microg/mL). Bioassay-guided fractionation of the extract resulted in isolation of cinnamoylphenethyl amides, including N-trans-caffeoyltyramine (1), N-trans-p-coumaroyltyramine (7), and N-trans-feruloyltyramine (8) as the main active constituents (IC50s ranging from 2.2 to 13.3 microM). Some structurally related, but less active compounds, such as cannabisin B (2), tyrosol (3), p-coumaric acid (4), ferulic acid (5), and N-cis-feruloyltyramine (6) were also identified, along with N-trans-3,4-dimethoxycinnamoyldopamine (9). Cytotoxicity of the active compounds in L6 cells was determined, and selectivity indices (SI) of 7.9 to 33.4 were calculated.     

Zonal modeling of radiative heat transfer in industrial furnaces using simplified model for exchange area calculation

The zonal analysis of industrial furnaces is considered with three-dimensional radiative heat transfer, incorporated with the mathematical zone method. In this method exchange areas are determined by simplified numerical integration in three dimensions for surface-surface, surface-gas and gas–gas zones for absorbing and emitting media. By focusing on new strategies to overcome the drawbacks of evaluating direct exchange areas, it is shown that the zone method is an effective numerical method for modeling three-dimensional thermal performance of gas-filled enclosures. Also the developed method for evaluating of exchange area is presented and compared with other methods in both sides of CPU time and accuracy. The method can decrease about 70% in error of calculation of some exchange areas as compared with the other numerical methods.     

Performance analysis of an irreversible Miller cycle with considerations of relative air–fuel ratio and stroke length

The performance of an air standard Miller cycle is analyzed using finite-time thermodynamics. The results show that if compression ratio exceeds certain value, the power output first increases and then starts to decrease with increasing relative air–fuel ratio, while if compression ratio exceeds certain value, the power output decreases with increasing relative air–fuel ratio. The results also show that if compression ratio is less than certain value, the power output decreases with increasing stroke length, while if compression ratio exceeds certain value, the power output first increases and then starts to decrease with increasing stroke length. With further increase in compression ratio, the increase of stroke length results in decreasing the power output. The results obtained from this work can be helpful in the design and evaluation of practical Miller engines.     

Preparation of strontium hexaferrite film by pulsed laser deposition with in situ heating and post annealing

Strontium hexaferrite (SrFe₁₂O₁₉) films have been fabricated by pulsed laser deposition on Si(1 0 0) substrate with Pt(1 1 1) underlayer through in situ and post annealing heat treatments. C-axis perpendicular oriented SrFe₁₂O₁₉ films have been confirmed by X-ray diffraction patterns for both of the in situ heated and post annealed films. The cluster-like single domain structures are recognized by magnetic force microscopy. Higher coercivity in perpendicular direction than that for the in-plane direction shows that the films have perpendicular magnetic anisotropy. High perpendicular coercivity, around 3.8 kOe, has been achieved after post annealing at 500 °C. Higher coercivity of the post annealed SrFe₁₂O₁₉ films was found to be related to nanosized grain of about 50–80 nm.     

Analysis of the magnetic losses in iron-based soft magnetic composites with MgO insulation produced by sol-gel method

This work investigated the magnetic losses of heat treated iron-based soft magnetic composites with a thin MgO insulating layer produced by sol-gel method. The samples were characterized by energy dispersive X-ray spectroscopy, X-ray analysis and Fourier transform infrared spectroscopy. The results show that the surface of the powders contains a thin layer of MgO insulation. The loss results indicate that the hysteresis part for both the core loss and total loss factor was approximately the same for the MgO-insulated compacts and conventional SOMALOY^TM samples with phosphate insulation after annealing at 600 °C. But the MgO-insulated compacts exhibited significantly lower eddy current contribution of both core loss and total loss factor with respect to SOMALOY^TM samples after annealing. Also the contribution of eddy current in the iron particles for MgO insulated compacts (k_p=0.91) was noticeably higher than this contribution for SOMALOY^TM samples (k_p=0.18) after annealing due to the higher electrical resistivity of the MgO-insulated compacts.     

Rheological study of segmented polyurethane and polycaprolactone blends

The dynamic rheological properties of segmented polyurethane based on polycaprolactone diol (PU-PCL diol) and poly (ɛ-caprolactone) (PCL) blends were experimentally examined and theoretically analyzed using Palierne model. PU–PCL diol was melt blended with PCL in three different ratios of 20, 30, and 40%. Initial modeling attempts failed to fit the experimental data of these blends, as the model overpredicted their rheological data. This failure is believed to be due to partial dissolution of PCL in PU. According to our obtained results from differential scanning calorimetry and dynamic thermal mechanical analysis, pure PU–PCL diol is diluted by its homopolymer. By calculating the complex modulus of this diluted matrix using a simple mixing rule and its incorporation into the model, good fitting of the Palierne equation to the experimental data was obtained.     

A study on the formation of strontium hexaferrite nanopowder by a sol–gel auto-combustion method in the presence of surfactant

Strontium hexaferrite is a hard magnetic material and has been extensively used as a permanent magnet. In this work, a novel sol–gel auto-combustion method was used to synthesize ultra-fine strontium hexaferrite, and the effect of the surfactant on the crystallite size of the final product was investigated for the first time. The DTA/TGA plot exhibited the formation temperature of hexaferrite. The XRD results show that adding surfactant to the sol does not change the composition of the combustion product and the surfactant burns completely during the combustion process. The average crystallite size of hexaferrite powders was also measured by the X-ray line broadening technique employing the Scherrer formula. The results show that adding surfactant to the gel makes the particle size of the final product much smaller.