Combination of RSM and NSGA-II algorithm for optimization and prediction of thermal conductivity and viscosity of bioglycol/water mixture containing SiO2 nanoparticles

The fluids containing nanoparticles have enhanced thermo-physical characteristics in comparison with conventional fluids without nanoparticles. Thermal conductivity and viscosity are thermo-physical properties that strongly determine heat transfer and momentum. In this study, the response surface method was firstly used to derive an equation for the thermal conductivity and another one for the viscosity of bioglycol/water mixture (20:80) containing silicon dioxide nanoparticles as a function of temperature as well as the volume fraction of silicon dioxide. Then, NSGA-II algorithm was used for the optimization and maximizing thermal conductivity and minimizing the nanofluid viscosity. Different fronts were implemented and 20th iteration number was selected as Pareto front. The highest thermal conductivity (0.576 W/m.K) and the lowest viscosity (0.61 mPa.s) were obtained at temperature on volume concentration of (80 °C and 2%) and (80 °C without nanoparticle) respectively. It was concluded that the optimum thermal conductivity and viscosity of nanofluid could be obtained at maximum temperature (80 °C) or a temperature close to this temperature. An increase in the volume fraction of silicon dioxide led to the enhancement of thermal conductivity but the solution viscosity was also increased. Therefore, the optimum point should be selected based on the system requirement.     

One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones and Their Sulfur Derivatives with H2SO4 Supported on Silica Gel or Alumina

The one-pot condensation of aromatic aldehydes, β-dicarbonyl compounds, and urea or thiourea in the presence of H₂SO₄ supported on silica gel or alumina (80% m/m) in refluxing n-hexane produces 3,4-dihydropyrimidin-2(1H)-ones and their sulfur derivatives in high to excellent yields.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Structure and properties of NR/BR blend/clay nanocomposites prepared by the latex method

Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount.     

Green synthesis and chemical characterization of silver nanoparticles obtained using Allium saralicum aqueous extract and survey of in vitro antioxidant,cytotoxic, antibacterial and antifungal properties

Allium saralicum R.M. Fritsch has been used in Iranian traditional medicine as a remedial supplement for microbial diseases. This paper reports the green synthesis, chemical characterization and antioxidant, cytotoxic, antibacterial and antifungal properties of silver nanoparticles obtained using aqueous extract of A. saralicum leaves. In this synthesis, no surfactants or stabilizers were used. For characterization, UV–visible spectroscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and field emission scanning electron microscopy were used. 2,2‐Diphenyl‐1‐picrylhydrazyl was used in experiments to assess the antioxidant potential of the silver nanoparticles, which revealed an impressive prevention in comparison with butylated hydroxytoluene. The synthesized silver nanoparticles at low doses (1–250 μg dl^?1) did not show marked cytotoxic activity (against cervical cancer cells (Hela), breast cancer cells (MCF‐7) and human embryonic kidney cells (HEK‐293)). Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Compared with all standard antimicrobials, the silver nanoparticles showed higher antibacterial and antifungal activities (p ≤ 0.01). Also, the silver nanoparticles inhibited the growth of all bacteria and fungi at concentrations of 31–250 μg ml^?1, and destroyed them at concentrations of 31–500 μg ml^?1 (p ≤ 0.01). Because the silver nanoparticles obtained using aqueous extract of A. saralicum leaves have antioxidant, non‐cytotoxic, antifungal and antibacterial potentials, they can be used as a medical supplement or drug.     

Phase Formation Studies of Lead(II) Copper(II) Oxotellurates: The Crystal Structures of Dimorphic PbCuTeO5, PbCuTe2O6, and [Pb2Cu2(Te4O11)](NO3)2

Two modifications of the oxotellurate(VI) PbCuTeO₅ were isolated as single crystals from product mixtures obtained from solid state reactions, whereas single crystals of the oxotellurates(IV) PbCuTe₂O₆ and [Pb₂Cu₂(Te₄O₁₁)](NO₃)₂ were grown under hydrothermal conditions. The crystal structures of all compounds comprise of characteristic coordination polyhedra, viz. nearly square [CuO₄] plaquettes for divalent copper, octahedral [TeO₆] units for hexavalent tellurium, trigonal‐pyramidal [TeO₃] and bisphenoidal [TeO₄] groups for tetravalent tellurium, and distorted [PbO_x] polyhedra for divalent lead. PbCuTeO₅ is dimorphic and crystallizes in a monoclinic and a triclinic modification, related by a translationengleiche group‐subgroup relation of index 2. PbCuTe₂O₆ represents the ideal composition of the rare mineral choloalite. The characteristic feature of the crystal structure of [Pb₂Cu₂(Te₄O₁₁)](NO₃)₂ is its layered set‐up, comprised of cationic [Pb₂Cu₂(Te₄O₁₁)]²⁺ ribbons (width approximately 6.7 Å) sandwiched between nitrate anions that are only weakly bound to the cationic layers.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.