Evaluating the impact of functional groups on membrane-mediated CO2/N2 gas separations using a common polymer backbone

Polymeric membranes have shown tremendous promise for the separation of CO₂ from flue gas streams. However, few systematic studies have been conducted to better understand the impact that chemical functionalities have on membrane-based gas separation performance. To address this gap, we herein describe the synthesis and gas separation performance of a series of vinyl-addition polynorbornenes bearing various CO₂-philic functional groups. To facilitate direct comparison between functional groups, each material was designed to maintain a common polymer backbone. Though the incorporation of CO₂-philic moieties within a dense polymeric membrane is frequently hypothesized to enhance CO₂ solubility, and thereby increase CO₂/N₂ selectivity, our results demonstrate that the incorporation of CO₂-philic groups onto a common polymer backbone do not necessarily result in increased gas separation performance. Experimental and computational results demonstrate that the incorporation of amidoxime groups onto a polynorbornene backbone increase CO₂/N₂ selectivity, whereas commonly employed ethereal side chains only increased permeability.     

Crystal Structure of LiRh-type IrZn Determined by Powder X-ray and Selected Area Electron Diffraction

The LiRh-type crystal structure of the equiatomic intermetallic compound IrZn turns out to be a competitor to the otherwise energetically favored CsCl-type structures of congeneric transition metal zinc phases, thus enlightening the structural impact of element-specific factors beyond the Hume-Rothery concept.     

High speed coding for velocity by archerfish retinal ganglion cells

ABSTRACT: BACKGROUND: Archerfish show very short behavioural latencies in response to falling prey. This raises the question, which response parameters of retinal ganglion cells to moving stimuli are best suited for fast coding of stimulus speed and direction. RESULTS: We compared stimulus reconstruction quality based on the ganglion cell response parameters latency, first interspike interval, and rate. For stimulus reconstruction of moving stimuli using latency was superior to using the other stimulus parameters. This was true for absolute latency, with respect to stimulus onset, as well as for relative latency, with respect to population response onset. Iteratively increasing the number of cells used for reconstruction decreased the calculated error close to zero. CONCLUSIONS: Latency is the fastest response parameter available to the brain. Therefore, latency coding is best suited for high speed coding of moving objects. The quantitative data of this study are in good accordance with previously published behavioural response latencies.     

An Improved Preparation of 4,7-Phenanthrolino-5,6:5′,6′-pyrazine

An overall three step preparation of the bis-diimine bridging ligand 4,7-phenanthrolino-5,6:5′,6′-pyrazine (ppz, 1) from 2-methoxy-1,4-phenylenediamine hydrosulfate 4 is reported.     

Alkoxyallene‐ynes: Selective Preparation of Bicyclo[5.3.0] Ring Systems Including a δ‐Alkoxy Cyclopentadienone

The development of an intramolecular rhodium(I)‐catalyzed Pauson–Khand reaction of alkoxyallene‐ynes with a proximal alkoxy group is reported. This reaction, in the presence of a [Rh(cycloocta‐1,5‐diene)Cl]₂/propane‐1,3‐diylbis(diphenylphosphane) system under a CO atmosphere, constitutes a powerful tool for selectively accessing carbo‐ and heterobicyclo[5.3.0] frameworks featuring an enol ether moiety. Through this procedure, a straightforward access to guaiane skeletons with a tertiary hydroxy group at the C10 position was achieved.     

Dynorphin A 1–17 biotransformation in inflamed tissue, serum and trypsin solution analysed by liquid chromatography–tandem mass spectrometry

Dynorphin A 1–17 (DYN A) is an endogenous neuropeptide that is of interest due to its diverse roles in analgesia, inflammation and addiction. Upon release, DYN A is subject to metabolism by a range of enzymes and its biotransformation is dependent on the site and environment into which it is released. In this study, we investigated the biotransformation of DYN A in rat inflamed tissue at pH?7.4 and 5.5, in rat serum and in trypsin solution. DYN A-porcine was incubated at 37?°C in each matrix over a range of incubation periods. The resultant fragments were separated using a C4 column and detected by mass spectrometry using total ion current mode. Incubation of DYN A in trypsin solution and in rat serum resulted in 6 and 14 fragments, respectively. Incubation in inflamed rat paw tissue occasioned 21 fragments at pH?7.4 and 31 fragments at pH?5.5. Secondary breakdown of some larger primary fragments was also observed in this study.     

Analysis of Biological Samples Using Paper Spray Mass Spectrometry: An Investigation of Impacts by the Substrates, Solvents and Elution Methods

Paper spray has been developed as a fast sampling ionization method for direct analysis of raw biological and chemical samples using mass spectrometry (MS). Quantitation of therapeutic drugs in blood samples at high accuracy has also been achieved using paper spray MS without traditional sample preparation or chromatographic separation. The paper spray ionization is a process integrated with a fast extraction of the analyte from the raw sample by a solvent, the transport of the extracted analytes on the paper, and a spray ionization at the tip of the paper substrate with a high voltage applied. In this study, the influence on the analytical performance by the solvent–substrate systems and the selection of the elution methods was investigated. The protein hemoglobin could be observed from fresh blood samples on silanized paper or from dried blood spots on silica-coated paper. The on-paper separation of the chemicals during the paper spray was characterized through the analysis of a mixture of the methyl violet 2B and methylene blue. The mode of applying the spray solvent was found to have a significant impact on the separation. The results in this study led to a better understanding of the analyte elution, on-paper separation, as well as the ionization processes of the paper spray. This study also helps in establishing a guideline for optimizing the analytical performance of paper spray for direct analysis of target analytes using mass spectrometry.     

Synthesis and characterisation of sterically stabilised polypyrrole particles using a chemically reactive poly(vinyl amine)-based stabiliser

Poly(vinyl amine) (PVAm) was derivatised using 2-thiophenecarboxaldehyde via Michael addition to prepare a statistical copolymer stabiliser for the synthesis of primary amine-functionalised polypyrrole (PPy) particles. A minimum stabiliser concentration of around 20 % (w/v) relative to pyrrole was required for well-defined PPy particles of approximately 100–200 nm, as judged by transmission electron microscopy (TEM) and dynamic light scattering (DLS). FTIR spectroscopy confirmed that stabiliser grafting had occurred, while x-ray photoelectron spectroscopy (XPS) studies indicated a stabiliser surface coverage on the PPy particles of around 53 %. PPy particles prepared at stabiliser concentrations below 20 % (w/v) were not colloidally stable above pH 6. However, higher stabiliser concentrations (e.g., 50 % (w/v) based on pyrrole) led to a significant improvement, with colloidal stability being retained above pH 7. Long-term colloidal stability studies of PPy particles stored at pH 7.5 confirmed that the amine-based stabiliser produced more stable aqueous dispersions than the imine-based stabiliser, since the latter bond is hydrolytically unstable.     

Highly sensitive determination of 68 psychoactive pharmaceuticals,illicit drugs,and related human metabolites in wastewater by liquid chromatography–tandem mass spectrometry

The present work describes the development and validation of a highly sensitive analytical method for the simultaneous determination of 68 compounds, including illicit drugs (opiates, opioids, cocaine compounds, amphetamines, and hallucinogens), psychiatric drugs (benzodiazepines, barbiturates, anesthetics, antiepileptics, antipsychotics, antidepressants, and sympathomimetics), and selected human metabolites in influent and effluent wastewater (IWW and EWW) by liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS). The method involves a pre-concentration and cleanup step, carried out by solid-phase extraction (SPE) using the adsorbent Strata-XC, followed by the instrumental analysis performed by LC–MS/MS, using a Kinetex pentafluorophenyl (PFP) reversed-phase fused-core column and electrospray ionization (ESI) in both positive and negative modes. A systematic optimization of mobile phases was performed to cope with the wide range of physicochemical properties of the analytes. The PFP column was also compared with two reversed-phase columns: fused-core C18 and XB-C18 (with a cross-butyl C18 ligand). SPE optimization and critical aspects associated with the trace level determination of the target compounds (e.g., matrix effects) have been also considered and discussed. Fragmentation patterns for all the classes were proposed. The validated method provides absolute recoveries between 75 and 120 % for most compounds in IWW and EWW. Low method limits of detection were achieved (between 0.04 and 10.0 ng/L for 87 % of the compounds), allowing a reliable and accurate quantification of the analytes at trace level. The method was successfully applied to the analysis of these compounds in five wastewater treatment plants in Santorini, a touristic island of the Aegean Sea, Greece. Thirty-two out of 68 compounds were detected in all IWW samples in the range between 0.6 ng/L (for nordiazepam) and 6,822 ng/L (for carbamazepine) and 22 out of 68 in all EWW samples, with values between 0.4 ng/L (for 9-OH risperidone) and 2,200 ng/L (for carbamazepine). The novel methodology described herein maximizes the information on the environmental analysis of these substances and also provides a first profile of 68 drugs in a Greek touristic area.