The Direct Synthesis of Hydrogen Peroxide Using Platinum‐Promoted Gold–Palladium Catalysts

The direct synthesis of hydrogen peroxide offers a potentially green route to the production of this important commodity chemical. Early studies showed that Pd is a suitable catalyst, but recent work indicated that the addition of Au enhances the activity and selectivity significantly. The addition of a third metal using impregnation as a facile preparation method was thus investigated. The addition of a small amount of Pt to a CeO₂‐supported AuPd (weight ratio of 1:1) catalyst significantly enhanced the activity in the direct synthesis of H₂O₂ and decreased the non‐desired over‐hydrogenation and decomposition reactions. The addition of Pt to the AuPd nanoparticles influenced the surface composition, thus leading to the marked effects that were observed on the catalytic formation of hydrogen peroxide. In addition, an experimental approach that can help to identify the optimal nominal ternary alloy compositions for this reaction is demonstrated.     

Friction force microscopy of alkylphosphonic acid and carboxylic acids adsorbed on the native oxide of aluminum

Monolayers of alkylphosphonic acids (APA) and alkylcarboxylic acids (ACA) on magnetron-sputtered aluminum films have been investigated by friction force microscopy (FFM), contact angle measurement, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS). Clear evidence has been provided from PM-IRRAS that friction coefficients, determined from FFM data, may be correlated directly with variations in adsorbate molecular structure. The friction coefficient increased with the length of the adsorbate molecule, but reached a limiting value when the alkyl chain of the adsorbate contained eight carbons in the case of APA or 12 carbons in the case of ACA. For a given alkyl chain length, APA monolayers yielded coefficients of friction that were similar to those of monolayers of alkylthiols of the same length, but smaller than those of ACA. These data indicate that APA monolayers are better ordered than ACA monolayers. These inferences were supported by PM-IRRAS data, which enabled the density of gauche defects to be estimated and correlated with variations in the coefficient of friction.     

Turbulent flow computations on 3D unstructured grids

An edge-based finite element method is presented for the simulation of compressible turbulent flows on unstructured tetrahedral grids. A two equation k–ω turbulence model is employed and the standard Galerkin approach is used for spatial discretisation. Stabilisation of the resulting procedure is achieved by the addition of an appropriate diffusion. An explicit multistage time-stepping scheme is used to advance the solution in time to steady state. The performance of the algorithm is demonstrated for the simulation of a high Reynolds number transonic separated flow over a wing.     

Recollections of Fred Almgren

While visiting Princeton for the 1997–98 year I have had the privilege of using Fred’s office and helping Jean to go through his papers. It has been moving to see the magnitude of Fred’s helpful correspondence with students and colleagues, some of which Jean and I returned to them with an invitation to contribute short recollections. This article gives some selections from their responses. For more recollections see Mackenzie’s article on “Fred Almgren: Lover of Mathematics, Family, and Life’s Adventures” (Notices AMS 44, 1997, 1102–1106) and the memorial issue ofExperimental Mathematics (Vol. 6, 1997, 1–12).     

Effective elastic moduli of two dimensional solids with distributed cohesive microcracks

Effective elastic properties of a defected solid with distributed cohesive micro-cracks are estimated based on homogenization of the Dugdale–Bilby–Cottrell–Swinden (Dugdale–BCS) type micro-cracks in a two dimensional elastic representative volume element (RVE).Since the cohesive micro-crack model mimics various realistic bond forces at micro-scale, a statistical average of cohesive defects can effectively represent the overall properties of the material due to bond breaking or crack surface separation in small scale. The newly proposed model is distinctive in the fact that the resulting effective moduli are found to be pressure sensitive.     

Superorbital expansion tube tests of a caret waverider

A computational and experimental study was conducted to assess the potential of testing waverider configurations in a high-performance, short-duration expansion tube facility. The tests were performed in the newly commissioned X3 superorbital expansion tube and provide the first experimental data of a waverider tested at a stagnation enthalpy and equivalent flight speed exceeding 40 MJ/kg and 9 km/s, respectively. Two simple caret configurations were chosen as benchmark test cases to test the use of the facility, instrumentation and numerical models to investigate these flows. The general performance of the sharp and blunt leading edge waveriders at angles of attack ranging from 0° to 5° were analyzed and compared to CFD and theoretical predictions. For the conditions tested, the presence of a strong viscous interaction caused the shock wave to be detached from the leading edge of the models resulting in a significant loss in performance. An analytical model was developed to account for the strong coupling between the shock wave and boundary layer. Results were shown to be in very good agreement with CFD estimates for both configurations at all angles of attack considered. Finite-rate chemistry CFD simulations indicated that real gas effects other than the residual levels of nonequilibrium freestream dissociation present in the expansion tube flow were negligible for the conditions tested. The study also revealed that a past flow visualization technique gave a false indication of the leading edge shock location. An improved experimental visualization technique was successfully tested with results from these tests correlating well with computational estimates. This study successfully demonstrated the use of the facility to study waverider performance at speeds representative of orbital flight.      

Polymer complexes. LXX. Synthesis,spectroscopic studies,thermal properties and antimicrobial activity of metal(II) polymer complexes

The monomer 3‐allyl‐5‐(phenylazo)‐2‐thioxothiazolidine‐4‐one (HL) was prepared by the reaction of allyl rhodanine with aniline through diazo‐coupling reaction. Reaction of HL with Ni(II) or Co(II) salts gave polymer complexes ( 1 – 8 ) with general stoichiometries [M(HL)(Cl)₂(OH₂)₂]_n, [M(HL)(O₂SO₂)(OH₂)₂]_n, [M(L)(O₂NO)(H₂O)₂]_n and [M(L)(O₂CCH₃)(H₂O)₂]_n (where M = Ni(II) or Co(II)). The structures of the polymer complexes were identified using elemental analysis, infrared and electronic spectra, molar conductance, magnetic susceptibility, X‐ray diffraction and thermogravimetric analysis. The interaction between the polymer complexes and calf thymus DNA showed a hypochromism effect. HL and its polymer complexes were tested against bacterial and fungal species. Co(II) polymer complex 2 is the most effective against Klebsiella pneumoniae and is more active than penicillin. The results showed that Ni(II) polymer complex 5 is a good antibacterial agent against Staphylococcus aureus and Pseudomonas aeruginosa. Molecular docking was used to predict the binding between the monomer with the receptors of prostate cancer (PDB code: 2Q7L Hormone) and breast cancer (PDB code: 1JNX Gene regulation). Coats–Redfern and Horowitz–Metzger methods were applied for calculating the thermodynamic parameters of HL and its polymer complexes. The thermal activation energy of decomposition for HL is higher than that for the polymer complexes.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Synthesis,characterization of Schiff base metal complexes and their biological investigation

A new Schiff base ligand named (E)‐2‐(((3‐aminophenyl)imino)methyl)phenol (HL) was prepared through condensation reaction of m‐phenylenediamine and 2‐hydroxybenzaldehyde in 1:1 molar ratio. The new ligand was characterized by elemental analysis and spectral techniques. The coordination behavior of a series of transition metal ions named Cr (III), Mn (II), Fe (III), Co (II), Ni (II), Cu (II), Zn (II) and Cd (II) with the newly prepared Schiff base ligand (HL) is reported. The nature of bonding and the stereochemistry of the complexes have been deduced from elemental analyses, IR, UV–Vis, ¹H NMR, mass, electronic spectra, magnetic susceptibility and conductivity measurements and further their thermal stability was confirmed by thermogravimetric analysis (TG). From IR spectra, it was observed that the ligand is a neutral tridentate ligand coordinates to the metal ions through protonated phenolic oxygen, azomethine nitrogen and nitrogen atom of NH₂ group. The existence, the number and the position of the water molecules was studied by thermal analysis. The molecular structures of the Schiff base ligand (HL) and its metal complexes were optimized theoretically and the quantum chemical parameters were calculated. The synthesized ligand and its complexes were screened for antimicrobial activities against bacterial species (Staphylococcus aureus and Bacillis subtilis, (gram positive bacteria)), (Salmonella SP., Escherichia coli and Pseudomonas aeruginosa, (gram negative bacteria)) and fungi (Aspergillus fumigatus and Candida albicans). The complexes were found to possess high biological activities against different organisms. Molecular docking was used to predict the efficiency of binding between Schiff base ligand (HL) and both receptors of Escherichia coli (3 T88) and Staphylococcus aureus (3Q8U). The receptor of Escherichia coli (3 T88) showed best interaction with Schiff base ligand (HL) compared to receptor of Staphylococcus aureu (3Q8U).