The Structure of a Non-Symmetric Disordered Tetramer: A Crystallographic and Solid State Multinuclear NMR Study of the Properties of 3(5)-Ethyl-5(3)-Phenyl-1H-Pyrazole

The X-ray structure and the solid-state NMR measurements, mainly ¹⁵N CPMAS of the labelled compound, allow to determine the static and dynamic properties of 3(5)-ethyl-5(3)-phenyl-1H-pyrazole. The compound is a tetramer formed by three 5-ethyl-3-phenyl-1H-pyrazole and one 3-ethyl-5-phenyl-1H-pyrazole tautomers in dynamic equilibrium with the complementary situation.     

Thermal study of l-alanine, l-threonine, and taurine crystals related to hydrogen bonding

In this study l-alanine, l-threonine, and taurine crystals were characterized through dilatometric technique and thermogravimetric and differential thermal analysis. The dilatometric analysis shows that the thermal expansion of the crystals is correlated with the strengths of local hydrogen bonding in the amino acid structures at room temperature. Thermogravimetric analysis and differential thermal analysis of the l-alanine, taurine, and l-threonine crystals have been performed at high temperatures. No clear correlation between the hydrogen bonding strengths and endothermic peak positions was observed.     

Determination of seven selected antipsychotic drugs in human plasma using microextraction in packed sorbent and gas chromatography–tandem mass spectrometry

A method using microextraction by packed sorbent (MEPS) and gas chromatography–tandem mass spectrometry (GC-MS/MS) is described for the determination of seven antipsychotic drugs in human plasma. The studied compounds were chlorpromazine (CPZ), haloperidol (HAL), cyamemazine, quetiapine, clozapine, olanzapine (OLZ), and levomepromazine; promazine, protriptyline, and deuterated CPZ were used as internal standards. The validation parameters included selectivity, linearity and limits of detection and quantitation, intra- and interday precision and trueness, recovery, and stability and were studied according to internationally accepted guidelines. The method was found to be linear between the lower limit of quantitation and 1000 ng/mL, except for OLZ and HAL (200 ng/mL), with determination coefficients higher than 0.99 for all analytes, and extraction efficiencies ranged from 62 to 92 %. Intra- and interday precision ranged from 0.24 to 10.67 %, while trueness was within a ±15 % interval from the nominal concentration for all analytes at all studied levels. MEPS has shown to be a rapid procedure for the determination of the selected antipsychotic drugs in human plasma, allowing reducing the handling time and the costs of analysis. Furthermore, GC-MS/MS has demonstrated to be a powerful tool for the simultaneous quantitation of the studied compounds, enabling obtaining adequate selectivity and sensitivity using a sample volume of as low as 0.25 mL.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Comparison of Three Analytical Methods for the Determination of Quinolones in Pig Muscle Samples

This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC–FD), liquid chromatography–mass spectrometry (LC–MS) and liquid chromatography-tandem mass spectrometry (LC–MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean–up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g⁻¹ using LC–FD, from 0.3 to 1.8 using LC–MS and from 0.2 to 0.3 using LC–MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).

     

Ammonium Determination in Water Samples by Using Opa-Nac Reagent: A Comparative Study with Nessler and Ammonium Selective Electrode Methods

A selective and sensitive method based on the ammonium derivatisation with o -phthaldialdehyde (OPA) and N -acetyl-cysteine (NAC) has been developed for ammonium determination in real water samples. The proposed procedure has been compared with ammonium reference methods such as Nessler reagent method and ammonium selective electrode. All procedures have been chemometrically tested and compared in terms of the main analytical properties. These procedures have been used to determine ammonium in unknown water samples. The OPA-NAC reagent method does not present any systematic error (proportional or constant), while Nessler reagent presents both of them for some samples assayed. The ammonium selective electrode is free of corrigible systematic errors, however presents amine interference. The OPA-NAC ammonium method is able to achieve a detection limit (LOD) of 0.07 mg/L in the sample, with a linear dynamic range up to 1.4 mg/L of ammonium.     

Comprehensive two‐dimensional gas chromatography coupled with static headspace sampling to analyze volatile compounds: Application to almonds

The hyphenation of static headspace sampling with comprehensive 2D GC equipped with a modulator based on capillary flow technology and a flame ionization detector was used to separate and identify 43 representative target volatile compounds (light hydrocarbons, carbonyls, pyrazines, alcohols, furans, and benzenes) frequently detected in the roasting process of nuts. Five column combinations with differing degrees of orthogonality (one conventional and four inverted phase sets) were tested in order to obtain the best conditions for analyzing these volatile compounds. Optimization of the working conditions for each of the different column combinations was performed by means of a central composite design. The best results in terms of separation and differentiation among the different chemical groups were achieved with a combination of inverted phase columns (first dimension: highly polar, INNOWax; second dimension: mid‐polar, ZB‐35). Additionally, a reference template was developed to provide an effective and rapid analysis of the target compounds. Finally, the proposed method was successfully employed to identify volatile compounds in raw and roasted almond samples from the Spanish cultivar Largueta.     

Solvent extraction with organophosphorus extractants in environmental samples: determination of cadmium(II) in natural water

In this work, Cd(II) extraction in natural waters by organophosphorus extractants as organic phase, as well as its back-extraction in an acidic media, has been studied. Cadmium extraction behavior at natural waters’ pH conditions (values in the range 7–8) was studied with two different extractants and co-ions, obtaining the highest extraction efficiency when using 0.1M Cyanex 272 in kerosene as organic phase and 0.1 M NO₃ ^? as co-ion. Once they were selected, the effect on the extraction efficiency of sample pH, buffer concentration, extraction time, Cyanex 272 concentration as well as back-extractant concentration, was studied. The presence of the main inorganic and organic ligands in the sample was also studied, observing that extraction efficiency was affected most significantly when chlorides were present, with a decrease of about 14%, proving negligible for the others. Under the selected conditions, spiked real samples were successfully analyzed.