Electron spin resonance studies of 199HgH, 201HgH, 199HgD and 201HgD isolated in neon and argon matrices at 4K: an electronic structure investigation

Various isotopomers of the mercury hydride radical (HgH) have been generated in a microwave discharge and trapped in neon and argon matrices at 4 K for electron spin resonance (ESR) investigations. Both the dipolar (A_dip) and isotropic (A_iso) components of the nuclear hyperfine interactions have been directly measured for ¹⁹⁹Hg, ²⁰¹Hg, H and D. Electronic structure information for HgH in its X²Σ ground state obtained from the hyperfine data is compared with theoretical results from several different computational methods. The hyperfine interactions in HgH are unusually large with A_iso(¹⁹⁹Hg) = 6859(3), A_dip(¹⁹⁹Hg) = 446(3), A_iso(H) = 730(2) and A_dip(H) = 0(2) MHz. A standard analysis of the hyperfine interactions demonstrates the need for a more in-depth theoretical treatment of HgH that should include relativistic effects. An interesting shift in spin density is observed when deuterium replaces hydrogen in HgH. The decreased spin density on deuterium, which was demonstrated in earlier studies, can now be more fully investigated since these new measurements confirm an associated increase in spin density on mercury     

Improved models for the phase behaviour of hydrogen fluoride: chain and ring aggregates in the SAFT approach and the AEOS model

Hydrogen fluoride presents one of the strongest hydrogen bonds known. Ring aggregates exist both in the vapour and liquid phases at low temperatures resulting in an anomalously high low-temperature vapour pressure. The effect of ring-like aggregates on the vapour—liquid phase equilibria of associating fluids is studied within the framework of the statistical associating fluid theory (SAFT) and in the chemical model of Lencka and Anderko (AEOS). The SAFT approach incorporates separate contributions to describe chain formation, association (hydrogen bonding), and long range dispersion forces. The treatment of the association interactions stems from the thermodynamic perturbation theory of Wertheim. At the first level of approximation the contribution of ring-like aggregates is neglected and only chain- and treelike structures are treated. In this work an earlier extension of the approach to incorporate ring aggregates is used to model the phase behaviour of hydrogen fluoride. The chemical model of Lencka and Anderko for associating fluids is also considered together with a modification that takes into account the formation of ring aggregates. Vapour pressures and coexistence densities are examined together with heats of vapourization, and the calculations are compared with experimental data.     

Absorption cross-sections and lifetimes as a function of size in Si nanocrystals embedded in SiO2

The photoluminescence (PL) emission yield of Si nanocrystals embedded in SiO₂ depends on their size and on Si–SiO₂ interface passivation. In this work we aim at clarifying the relative importance of both contributions by studying lifetimes and absorption cross-sections as a function of size, for samples with and without passivation in forming gas. We find that while the PL lifetime increases steadily (quasi-linear dependence), the radiative lifetime increases exponentially with the nanocrystal size. Thus, as expected, radiative oscillator strengths are much smaller for large nanocrystals, but this reduction is partially compensated by a less effective quenching at interfacial non-radiative states. The absorption cross-section per nanocrystal rises as the nanocrystal size decreases, for all excitation wavelengths, implying that the variation of oscillator strength dominates over the reduction of the density of states. Passivation processes do not affect the emission mechanism and increase the emission yield while reducing the density of non-radiative recombination centers at the Si–SiO₂ interface (P_b centers).     

Assessment of Temporal Variability Trends for Inorganic Parameters in Ground Water

Abstract

The passage of environmental legislation in the United States has dramatically increased ground-water monitoring in the vicinity of point sources such as abandoned waste disposal sites, operational waste disposal sites, and municipal landfills. Even though these programs require sufficient sampling to define background conditions as part of the site characterization process, there is still a general absence of quantitative information on the magnitude and periodicity of temporal fluctuations for inorganic constituents in ground water. This paper presents an approach that has been used to develop an initial characterization of these temporal trends.

A search if on-going site investigation reports identified 18 facilities across the United States that had monthly monitoring data at a frequency of at least monthly for a period of one and a half years or longer (15 RCRA-C hazardous waste disposal facilities with monthly data for a period of 2–3 years, 2 research monitoring locations with biweekly monitoring data for a period of one and a half years, and a precious metal mining operation with daily monitoring data for a limited number of parameters for a period of one and a half years). The data from these site investigations were used to describe the temporal variability of several ground-water constituents including pH, specific conductance, sulfate, sodium, chloride, alkalinity, silica, iron, and manganese. An assessment of these data suggests that the magnitude of temporal ground-water fluctuations are on the order of 20 percent of the average concentration for chloride, 10 percent of the average concentration for sodium, manganese and specific conductance, 5 percent of the average concentration for alkalinity and pH, and essentially zero for silica. The apparent periodicities of these temporal fluctuations ranged from 40 weeks to approximately 2 years. The magnitude and periodicities in ground water are substantially smaller than those that have been reported and documented for the same constituents in surface waters. These differences are due to the fact that sunlight and wind, two energy factors that drive temporal cycles in surface water, do not exert a similar influence on the environmental chemistry of ground-water constituents.     

The single-mode rate equations for semiconductor lasers with thermal effects

A mathematical model describing the coupling of electrical,optical and thermal effects in semiconductor lasers is introduced.Numerical and asymptotic solutions are derived, including expressionsfor key physical quantities such as the initial time delay,the frequency of spike oscillation and the temperature rise,together with its influence on the photon density, the electronconcentration and the threshold current. The consequences ofthermal effects in reducing efficiency are thus quantified.     

连续波锁模P_r~（3＋）：YLF激光器

本文报导了采用氩离子激光器来泵浦Ｒｒ￣（３＋）：ＹＬＦ晶体，应用声光调制器实现了主动锁模；同时应用振动─高反射平面镜也实现了被动锁模，两种锁模均得到了ｐｓ光脉冲。据作者了解这是这种晶体材料的第一次锁模运转。     

PHOTODYNAMIC ACTION OF CHEMICALLY RELATED FLAVONES

Abstract— Flavone, polyhydroxyflavones (apigenin, fisetin, kaempferol, luteolin, myricetin, quercetin, resokaempferol and robinetin), polymethoxyflavones and acetylated and benzylated flavones were tested for photodynamic activity using Tetrahymena pyriformis T as the test organism. Among these compounds, polymethoxyflavones showed the highest order of activity, followed by flavone and then flavone derivatives with OH and OCH₃ groups. Resokaempferol was the only active polyhydroxyflavone, the remainder being inactive such as the benzyl-derivative. The methoxyl group in the 5–position and an increase in number of methoxyl groups from one to three in the phenolic portion of the flavonoid tended to decrease photodynamic activity. Tetrahymena killed photodynamically by polymethoxyflavones were morphologically altered by blister-like blebs. Polymethoxyflavones showed the lowest cytotoxicity and the greatest photodynamic activity among those flavonoids tested. The majority of the favonoids in this series have absorption spectra in the 320–370 nm region.     

Design of a composite amperometric enzyme electrode for the control of the benzoic acid content in food

A graphite–Teflon–tyrosinase composite biosensor for the determination of benzoic acid in foodstuffs is reported. The biosensor functioning is based on the inhibition effect of benzoic acid on the biocatalytic activity of the enzyme in a reversed micelle working medium formed with ethyl acetate as the continuous phase, a 0.05 mol l⁻¹ phosphate buffer solution of pH 7.4 (5%) as the aqueous dispersed phase, and 0.10 mol l⁻¹ dioctyl sulfosuccinate (AOT) as the emulsifying agent. A potential value of −0.10 V, and a constant enzyme-substrate (phenol) concentration of 2.0×10⁻⁴ mol l⁻¹ were selected to carry out the amperometric inhibition measurements. The tyrosinase inhibition process by benzoic acid is reversible and of the competitive type, with an apparent inhibition constant of 0.016 mmol l⁻¹. The composite bioelectrodes allow the regeneration of the electrode surface by polishing and exhibit long-term operation and stability. A limit of detection of 9.0×10⁻⁷ mol l⁻¹ benzoic acid was obtained. An interference study from other substances which can be found in foodstuffs together with benzoic acid was performed. Taking advantage of the capabilities of reversed micelles as universal solubilization media, the composite tyrosinase electrode was used for the determination of benzoic acid in two different kind of samples: mayonnaise sauce, which is a highly hydrophobic matrix, and Cola soft drinks, a hydrophilic matrix for which practically no sample treatment is necessary.     

Finite Element Methods for a Model for Full Waveform Acoustic Logging

A model is defined to simulate the propagation of waves in aradially symmetric, isotropic, composite system consisting ofa fluid-filled well bore ^f through a fluid-saturated poroussolid ^p. Biot's equations of motion are chosen to describe thepropagation of waves in ^p, while the standard equation of motionfor compressible inviscid fluids is used for ^f, with appropriateboundary conditions at the contact surface between ^f and ^p.Also, absorbing boundary conditions for the artificial boundariesof ^p are derived for the model, their effect being to make themtransparent for waves arriving normally First, results on the existence and uniqueness of the solutionof the differential problem are given and then a discrete-time,explicit finite element procedure is defined and analysed, withfinite element spaces suited for radially symmetric problemsbeing used for the spatial discretisation.