Sulfate Ions in Titania Polymorphs

Sol-gel titania was sulfated by using sulfuric acid as hydrolysis catalyst, or by impregnating with ammonium sulfate fresh samples prepared with nitric acid or ammonium hydroxide as hydrolysis catalyst. Samples were characterized with X-ray powder diffraction, infrared spectroscopy, thermogravimetry and atomic absorption spectroscopy. Sulfate ions were found anchored to brookite and anatase phases, because they have short O—O atomic bond lengths slightly larger than the largest O—O bond length of sulfate ion. Since the shortest O—O atomic bond in anatase is smaller than the one in brookite, the sulfate ions are then less deformed when they are anchored to anatase, and consequently more stable. Therefore when the sample temperature is raised, the brookite with sulfate ions was transformed mainly to anatase and not into rutile, which is the most probably transformation when these ions are not involved. Sulfate ions also hindered anatase and brookite crystallite growing and stabilized the crystalline structure of anatase. When the sulfate ions are lost the crystalline anatase phase is transformed into rutile, leaving a large number of vacancies that favored atom diffusion and consequently the growing of rutile crystallites. The crystalline evolution of the samples as a function of the annealing temperature is almost independent of the sulfating method.     

Regioselectivity in acylation of oligosaccharides catalyzed by the metalloprotease thermolysin

Investigation of the acylation scope of carbohydrates by metalloprotease thermolysin immobilized on Celite as biocatalyst has been carried out. The reactions were performed in DMSO, a good solvent for carbohydrates, where the enzyme has previously shown its activity in transesterifications of sucrose, maltose and maltose-containing oligosaccharides. Surprisingly, no reaction was observed for glucose or the glucose-containing disaccharides, trehalose and lactose. In contrast, laurate monoesters of several sucrose-containing tri- and tetrasaccharides were synthetized through a one step transesterification using vinyl laurate as the acylating agent. Enzyme regioselectivity was accurately determined by HPLC/MS and the structure of the main regioisomers was established by a combination of NMR experiments. The preferred position of acylation in all cases was the 2-OH of the α-d-glucopyranose moiety linked 1→2 to the β-d-fructofuranose unit. These results correlate with the regioselectivity observed in the case of the disaccharide sucrose. A general carbohydrate binding motif for catalysis by thermolysin is proposed.     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

The applicability of DTA and DSC techniques to the study of the kinetics of phase transition reactions

Differential thermal analysis and differential scanning calorimetry techniques have been used to study the kinetics of phase transitions. The aragonite/calcite transformation was chosen as test reaction.Marked discrepancies were observed between the DTA kinetic results and those obtained from isothermal kinetic measurements. This disagreement is associated with the difficulty of determining accurately the reaction rate of the process from a DTA curve.In contrast, in DSC measurements, where the reaction rate is given by the height of the peak from the base-line, it is possible to get a satisfactory fit of the data, and the kinetic results obtained with this technique are in good agreement with the isothermal ones.

---

Zusammenfassung Die Differentialthermoanalyse und DSC wurden zur Untersuchung der Kinetik von Phasenübergängen eingesetzt. Die Umwandlung Aragonit/Calcit wurde als Testreaktion gewählt.Bedeutende Diskrepanzen wurden zwischen den kinetischen Ergebnissen der DTA und den durch isotherme kinetische Messungen erhaltenen Ergebnissen beobachtet. Diese Abweichungen sind damit verbunden, daß es schwierig ist, die Reaktionsgeschwindigkeit des Vorgangs aus einer DTA-Kurve genau zu ermitteln.Bei DSC-Messungen,wo die Reaktionsgeschwindigkeit durch die Höhe des Peaks von der Grundlinie gegeben ist, kann eine befriedigende Anpassung der Daten erhalten werden, und die durch diese Technik erhaltenen kinetischen Ergebnisse sind in guter Übereinstimmung mit den isothermen Ergebnissen.

---

. /. , . -. , , , , , .

     

Field-amplified sample stacking and nonaqueous capillary electrophoresis determination of complex mixtures of polar aromatic sulfonates

Nonaqueous CE and field-amplified sample stacking have been used in the determination of complex mixtures of polar aromatic sulfonates (AS; mainly benzene- and naphthalenesulfonates) of environmental concern. The analytical procedure consists of an on-column aqueous sample enrichment, followed by the nonaqueous electrophoretic determination of stacked aromatic sulfonates. Various organic solvents were used as separation medium, acetonitrile and N-methylformamide gave the best results. Optimum capillary electrophoresis separation is obtained with ammonium acetate (25 mM) dissolved in N-methylformamide-methanol (90:10) as background electrolyte. This combined method was applied to the analysis of surface water samples spiked with selected aromatic sulfonates derivatives.     

Aquatic degradation of triclosan and formation of toxic chlorophenols in presence of low concentrations of free chlorine

The degradation of 2-(2,4-dichlorophenoxy)-5-chlorophenol (triclosan) in chlorinated water samples was investigated. Sensitive determination of the parent compound and its transformation products was achieved by gas chromatography with mass spectrometry detection after sample concentration, using a solid-phase extraction sorbent and silylation of the target compounds. Experiments were accomplished using ultrapure water spiked with chlorine and triclosan concentrations in the low mg/l and ng/ml ranges respectively. Chlorination of the phenolic ring and cleavage of the ether bond were identified as the main triclosan degradation pathways. Both processes led to the production of two tetra- and a penta-chlorinated hydroxylated diphenyl ether, as well as 2,4-dichlorophenol. The formation of 2,3,4-trichlorophenol was not detected in any experiment; however, significant amounts of 2,4,6-trichlorophenol were noticed. All of these five compounds were also identified when triclosan was added to tap-water samples with free chlorine concentrations below 1 mg/l. Minor amounts of three di-hydroxylated phenols, containing from one to three atoms of chlorine in their structures, were also identified as unstable triclosan chlorination by-products. The analysis of several raw wastewater samples showed the co-existence of important concentrations of triclosan and its most stable by-products (2,4-dichlorophenol and 2,4,6-trichlorophenol), reinforcing the potential occurrence of the described transformations when products containing triclosan are mixed with chlorinated tap water.     

A study of the compositional variation of the essential oil of ylang-ylang (Cananga odorata Hook Fil. et Thomson,formagenuina) during flower development

Volatile secondary metabolites from Colombian ylang-ylang flowers were obtained by combined steam distillation - solvent extraction. The samples were analyzed by high resolution gas chromatography with flame ionization, nitrogen/phosphorus, or mass spectrometric detection. The chemical composition of the oils extracted from flowers at different stages of development differed both qualitatively and quantitatively. The generation of total volatile metabolites, light oxygenated compounds in particular, increased markedly during flower maturation. In this work the quality of the ylang-ylang essential oils was studied as a function of flower maturity.     

Low-Temperature Phase Formation of Sn-Doped LaMnO3+δ Perovskite

The incorporation of Sn into LaMnO₃ perovskite and its influence on magnetotransport properties were studied in samples synthesized at low temperature. Single-phase materials for two series of samples with La/(Sn+Mn)=1 and La/(Sn+Mn)<1 ratios were obtained by substitution of up to 10% of the Mn ions by Sn⁴⁺. The effect of Sn substitution was monitored through measurements of thermal, “M(T)”, and magnetic field, “M(H)”, dependences of magnetization, as well as of resistivity, “ρ(T)”, at 0 and 70 kOe. These showed that this effect depends strongly on the perovskite cation site ratio (A/B). For La/(Sn+Mn)=1, M and T_C were depressed as Sn content was increased. The magnetization data suggest the presence of magnetic clusters with superparamagnetic behavior. No evidence of magnetoresistance (MR) was found. For La/(Sn+Mn)<1 ratio, the samples showed ferromagnetic behavior and MR and both M and T_C raised as Sn content increased. The results are discussed in terms of A site vacancies.