Characterization of Pentaclethra macroloba oil

The Pracaxi oil—(Pentaclethra macroloba) contains high concentrations of fatty acids with emollient action that contribute to skin hydration. The use of this oil is supported by the utilization of natural resources thus enabling regional development and social contribution. The objective of this study was to characterize the P. macroloba oil by thermogravimetry (TG, DTG, and DTA), gas chromatography, Fourier transform infrared spectroscopy (FT-IR), and oxidation stability—Rancimat, aiming at the quality control of plant raw material. Three samples of crude oil sold by Amazon Oil Industry (Ananindeua, Pará, Brazil) were studied. The analysis of these oil samples showed different fatty acids, especially the behenic, oleic, linoleic, and lignoceric acids totalizing approximately 96 % of the grease composition and in smaller percentage arachidic, lauric, myristic, palmitic, and linolenic acids were found. The major acids have wide medicinal use. According to the TG/DTG curve, thermal stability was observed up to 220 °C, indicating a greater mass loss related to the dehydration and elimination of volatile substances. The thermal decomposition process occurred in the range of 430–450° C according to the DTG curve. The absorption spectrum in the infrared region (FT-IR) showed well-defined bands confirming the presence of functional groups present in the oil. Tests in a Rancimat have shown an induction period between 8 and 10 h demonstrating that the samples are in agreement with the standards required by ANP No. 14/2012 which requires at least 6 h of testing.     

Complete assignment of NMR data of 22 phenyl‐1H‐pyrazoles' derivatives

Complete assignment of ¹H and ¹³C NMR chemical shifts and J(¹H/¹H and ¹H/¹⁹F) coupling constants for 22 1‐phenyl‐1H‐pyrazoles' derivates were performed using the concerted application of ¹H 1D and ¹H, ¹³C 2D gs‐HSQC and gs‐HMBC experiments. All 1‐phenyl‐1H‐pyrazoles' derivatives were synthesized as described by Finar and co‐workers. The formylated 1‐phenyl‐1H‐pyrazoles' derivatives were performed under Duff's conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Study of process parameters for starch,gluten, and glycerol mixtures

This work involved a study of the effect of processing variables (temperature, water content, rotor speed, and time) on the mechanical properties of starch:gluten:glycerol mixtures in the weight ratio of 40:40:20. The properties of the materials were affected by the processing variables. The torque decreased with water content, indicating that water facilitates the plasticization of mixtures, whereas the increase in temperature accelerated the evaporation of water, thus increasing the torque. Ultimate tensile strength was achieved at the lowest temperature (110°C) and the highest water content (20%), whereas maximum elongation was achieved for the material processed at the highest temperature, 150°C, and the fastest rotor speed, 70 rpm. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Controlled removal of overpainting and painting layers under the action of UV laser radiation

Laser material removal applied to selective overpaintings and subsequent painting layers detachment was studied in order to select the best cleaning practice of painted artworks. The ablation depth as a function of incident laser fluence/intensity and irradiation pulse number was considered as a reference parameter. We have measured the ablation depth with both a contact microprofilometer and a white light interferometer as a function of laser irradiation parameters. The measurements have evidenced that the ablation depth in our experiments varied between 2 and 100 μm making possible selective removal of painting.     

Thermochemistry of diphenic anhydride. A combined experimental and theoretical study

The standard (p°?=?0.1?MPa) molar enthalpy of formation for solid and gaseous diphenic anhydride (2,2′-biphenyldicarboxylic anhydride, dibenz[c,e]oxepin-5,7-dione) was derived from the standard molar enthalpy of combustion, in oxygen, at T?=?298.15?K, measured by static bomb combustion calorimetry, and the standard molar enthalpy of sublimation, at T?=?298.15?K, measured by Calvet microcalorimetry: ?(258.4?±?4.9) kJ?mol^?1. In addition, ab initio and density functional theory calculations have been performed at a variety of levels. The degree of aromaticity of diphenic anhydride is discussed in the context of other oxygen-containing (ring and keto) heterocycles and related carbocycles: this species is surprisingly destabilized.     

Polyhydroxybutyrate (PHB) Synthesis by <Emphasis Type="Italic">Spirulina</Emphasis> sp. LEB 18 Using Biopolymer Extraction Waste

The reuse of waste as well as the production of biodegradable compounds has for years been the object of studies and of global interest as a way to reduce the environmental impact generated by unsustainable exploratory processes. The conversion of linear processes into cyclical processes has environmental and economic advantages, reducing waste deposition and reducing costs. The objective of this work was to use biopolymer extraction waste in the cultivation of Spirulina sp. LEB 18, for the cyclic process of polyhydroxybutyrate (PHB) synthesis. Concentrations of 10, 15, 20, 25, and 30% (v/v) of biopolymer extraction waste were tested. For comparison, two assays were used without addition of waste, Zarrouk (SZ) and modified Zarrouk (ZM), with reduction of nitrogen. The assays were carried out in triplicate and evaluated for the production of microalgal biomass and PHB. The tests with addition of waste presented a biomass production statistically equal to ZM (0.79 g L^?1) (p?<?0.1). The production of PHB in the assay containing 25% of waste was higher when compared to the other cultivations, obtaining 10.6% (w/w) of biopolymer. From the results obtained, it is affirmed that the use of PHB extraction waste in the microalgal cultivation, aiming at the synthesis of biopolymers, can occur in a cyclic process, reducing process costs and the deposition of waste, thus favoring the preservation of the environment.