Gas-phase electrophilic addition promoted by CH(3)S(+)=CH(2) ions on aromatic systems

The gas-phase methylenation reaction between CH(3)S(+)=CH(2) and alkylbenzenes, aniline, phenol and alkyl phenyl ethers, which yields [M + CH](+) and CH(3)SH, has been studied by Fourier transform ion cyclotron resonance (FT-ICR) techniques and computational chemistry at the DFT level. The methylthiomethyl cation is less reactive than methoxymethyl and, unlike the latter, is unreactive toward benzene. The calculations suggest that reaction with toluene should proceed primarily by addition at the para and ortho positions resulting in a benzyl-type ion. Reaction with aniline-2,3,4,5,6-d(5) reveals that elimination of CH(3)SD is kinetically favored by a factor of 5 over elimination of CH(3)SH. Experiments with C(6)H(6)ND(2) and theoretical calculations suggest that methylenation at the nitrogen atom is energetically favorable and likely, but the observed results may reflect some H/D scrambling, which occurs after attack at a ring position. By comparison, reaction with phenol-2,3,4,5,6-d(5) reveals that methylenation followed by elimination of CH(3)SD is kinetically favored by a factor of 3.8 over elimination of CH(3)SH. For phenol, the theoretical calculations suggest that attack by CH(3)S(+)=CH(2) at the para or ortho position is the only low-energy pathway for methylenation. However, a low-energy pathway for hydrogen scrambling is predicted by the calculations originating from the exit complex, [CH(3)SH(...) CH(2)=C(6)H(4)=OH](+), of reaction at a ring position.     

Equilibrium states of self-assembly systems: Monte Carlo simulations

We investigated the equilibrium states of the self-assembly of amphiphilic molecules in water. The amphiphiles are represented by chains of the type H1T4, where H is the hydrophilic part of the molecule and T is its hydrophobic portion formed by four monomers. We have performed Monte Carlo simulations on a two-dimensional lattice, in which each water molecule occupies a single site, and the amphiphiles occupy five sites of the lattice. We have determined the aggregate distribution curves for the system at low concentration and fixed temperature. We have shown that the criterion to determine the equilibrium states of the system, based on the stabilization of energy curves as a function of the simulation time, is not reliable. The best way to ensure that the equilibrium state was reached was to follow the route to equilibrium of all aggregate sizes of the system.     

Headspace solid-phase microextraction of cannabinoids in human head hair samples

A fast method was optimized and validated with the aim to detect cannabinoids (cannabidiol, cannabinol, and delta-9-tetrahydrocannabinol) in human head hair samples. The method was based on an initial procedure of external decontamination of hair samples (10 mg) with petroleum ether, followed by alkaline digestion and further extraction of cannabinoids by means of a headspace solid-phase microextraction technique (HS-SPME). GC-MS was used to identify and quantify the analytes in SIM mode. The LOQs and LODs obtained were 0.07 and 0.12 ng/mg, respectively, for all the studied cannabinoids. The method proved to be simple, rapid, and precise. By using the weighted least squares linear regression (weighting factor 1/x2), the accuracy of the analytical method was improved at the lower end of the calibration curve (from 0.12 to 12 ng/mg; r >0.98). Hair samples collected from eight volunteers (in-patients of a drug abuse rehabilitation clinic) were submitted to the proposed method. Detection of the drugs was observed in samples of the volunteers who reported frequent marijuana use (at least ten times a week).     

Stereoselective determination of hydroxychloro-quine and its major metabolites in human urine by solid-phase microextraction and HPLC

The enantioselective analysis of hydroxychloroquine (HCQ) and its major metabolites was achieved by HPLC and solid-phase microextraction. The chromatographic separation was performed on a Chiralcel OD-H column using hexane/methanol/ethanol (96:2:2, v/v/v) plus 0.2% diethylamine as the mobile phase, at the flow rate of 1.3 mL/min. The main extraction parameters were optimized. The best condition was achieved by the addition of 10% NaCl and 1 mL phosphate buffer 1 mol/L pH 11 to 3 mL human urine. The extraction was conducted for 40 min at 25 degrees C and the desorption time was 3 min using methanol (100%). PDMS-DVB 60 microm fiber was used in this study. The mean recoveries were 9.3, 9.2, and 14.4% for HCQ, desethylhydroxychloroquine (DHCQ), and desethylchloroquine (DCQ), respectively. The method was linear over the range of 50-1000 ng/mL for HCQ enantiomers and over the range of 42-416 ng/mL for DCQ and DHCQ enantiomers. Within-day and between-day precision and accuracy assays for HCQ and its metabolites were lower than 15%. The preliminary 48 h urinary excretion study performed in human urine showed to be stereoselective. The amount of (+)-(S)-enantiomer excreted was higher than its antipode.     

Melanopsins: Localization and Phototransduction in Xenopus laevis Melanophores

Xenopus laevis melanophores express two melanopsins, Opn4x and Opn4m. We identified Opn4x immunoreactivity throughout the melanophore cytoplasm and in the cell membrane. The strongest immunopositivity for Opn4m was observed in the nuclear region, and no labeling was seen in the cell membrane. This immunodistribution suggests Opn4x as the functional photopigment. In X. laevis melanophores, light triggers pigment dispersion and clock gene induction at blue wavelength, which maximally activates melanopsins. Although light stimulation activates phospholipase C and increases intracellular calcium and cGMP, this nucleotide does not participate in photo‐induced melanin dispersion. Nevertheless, the guanylyl cyclase activator YC‐1 stimulates Per1 expression, similar to blue light pulse, and the use of pharmacological inhibitors indicates the participation of the phosphoinositide cascade. Since cAMP levels does not change after blue light stimulation, the cAMP/PKA pathway most probably is not involved in blue light induction of Per in X. laevis melanophores. Given the localization of melanopsins and our pharmacological data, the light‐induced clock gene expression seems to be mediated by Opn4x through phosphoinositide cascade and rise in cGMP, thus leading to the reset of the biological clock in our model.     

Selenium determination in tissue samples of Nile tilapia using ultrasound-assisted extraction

This paper proposes a method to determine selenium in samples of fish muscle and liver tissue using ultrasound assisted extraction process, and analysed by graphite furnace atomic absorption spectrometry (GFAAS). The selenium content was extracted by 0.10 M HCl at the optimal extraction conditions which were established as follows: sample mass of 100 mg; granulometry of the sample <60 μm; sonication time of five 40 s cycles; and sonication power of 136 W. The selenium determinations were performed by GFAAS, at a drying temperature of 120°C/250°C, pyrolysis temperature of 1300°C, atomization temperature of 2300°C, and cleaning temperature of 2800°C. Palladium nitrate was used as a chemical modifier coinjected with the samples, and tungsten as a permanent modifier. The concentration of selenium determined in the pool of fish muscle and liver tissue were 280.4±4.2 e 592.3±6.7 μg kg⁻¹, respectively. The accuracy and precision of the proposed extraction method were evaluated using certified standard Bovine Muscle — NIST 8414. The results obtained by the ultrasonic extraction method were equivalent to those obtained by the method of acid mineralization of samples in a microwave oven     

Production of Cyclodextrins from Cornstarch Granules in a Sequential Batch Mode and in the Presence of Ethanol

The influence of Toruzyme? cyclomaltodextrin glucanotransferase concentration and the presence of ethanol have been studied for the production of α-, β-, and γ-cyclodextrins (CDs) from 15% (w/v) cornstarch, at 65 °C and pH 6, with the aim of increasing CD yield. The selected concentrations for a single batch reactor were 10% (v/v) ethanol and 0.1% (v/v) enzyme, yielding after 12 h, 37% total CDs, of which 52.2% was α-CD, 38.8% β-CD, and 9.0% γ-CD. The enzyme specific activities per unit mass of protein for producing α-, β-, and γ-CD were 37.25, 19.61, and 8.63 U mg(-1), respectively. Total CD yield per milliliter of enzyme was 55 g. To increase CD yield per enzyme charge and thus reduce costs, the production of CDs was tested with two sequential batches in which a single enzyme charge was used. At the end of the first batch, the enzyme was adsorbed either on 65 °C pretreated starch granules or on raw starch, and a second batch was run with this material. The best result, in this case, was obtained for pretreated starch, increasing total CD produced by 57.4%, with 53.2% α-CD, 36.1% β-CD, and 10.7% γ-CD. CD yield per milliliter of enzyme was then 87 g.     

Synthesis of new 9-hydroxy-α- and 7-hydroxy-β-pyran naphthoquinones and cytotoxicity against cancer cell lines

A synthetic method to obtain α- and β-pyran naphthoquinones 10 and 11 with a hydroxyl substituent on the aromatic ring was developed. Two series of α- and β-pyran naphthoquinones were obtained from the 8-hydroxy-lawsone, and their anticancer properties were evaluated against four tumor cell lines. In general, the new compounds displayed good activity, possibly indicating that these compounds have increased pro-oxidant capacity. The 9-hydroxy-α-lapachone and 7-hydroxy-β-lapachone analogues of the natural products α-lapachone and β-lapachone were successfully produced by this methodology.     

Effects of Plasma Etching on Surface Modification and Gas Permeability of Bisphenol‐A Polycarbonate Films

The surface fluorination of polycarbonate bisphenol‐A thin films was carried out by treatment with plasma of sulfur hexafluoride/argon (SF₆/Ar) using a radio frequency (RF) discharges. Effects of treatment time and SF₆ concentration have been studied. Surface characterization was performed using X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy with attenuated total reflectance (FT‐IR/ATR), atomic force microscopy (AFM) and contact angle measurements. The effects of the surface modification on the carbon dioxide (CO₂) gas permeation of the fluorinated films were evaluated. The results showed effective fluorination of all samples, with C‐F, C‐F₂ and even C‐F₃ groups attached to the polycarbonate, depending on the treatment conditions. The presence of incorporated fluorine molecules absorbed into the polymer structure during treatment was also shown. The polymer films showed an increase of their surface roughness and a decrease in their surface tension due to the plasma treatment. Plasma fluorination also decreases polycarbonate CO₂ permeability considerably. The films treated with the lower concentration of SF₆ showed the highest barrier values; however, significant differences between the permeability values for the samples treated for different times were not observed.