Application of a new nanoporous sorbent for extraction and pre-concentration of lead and copper ions

The authors describe a method for the trace determination of copper (II) and lead (II) in water and fish samples using solid-phase extraction via siliceous mesocellular foam functionalised by dithizone. Siliceous mesocellular was functionalised with dithizone, and the resulting sorbent was characterised by scanning electron microscopy, surface area analysis, thermogravimetric/differential thermal analysis and FTIR. Following solid-phase extraction of target ions by the sorbent, copper and lead ions were quantified by flame atomic absorption spectrometry. Factors affecting the sorption and desorption of target ions by the sorbent were evaluated and optimised. The calibration plot is linear in the 1 – 500 μg L^?1 copper (II) and 3–700 μg L^?1 lead (II) concentration range. The relative recovery efficiency in real sample analysis is in the range from 96 to 102%, and precision varies between 1.7 and 2.8%. It is should be noted that the limits of detection for the copper and lead analysis were 0.8 and 1.6 μg L^?1, respectively. Also, the adsorption capacities for copper and lead ions were 120 and 160 mg g^?1, respectively. The obtained pre-concentration factor for the lead and copper ions by the proposed solid-phase extraction was 75. The method was successfully applied to the determination of low levels of copper (II) and lead (II) in tap, Caspian sea, Persian gulf and lake water and also their detection in fish samples.     

Microextraction in packed syringe by using a three-dimensional carbon nanotube/carbon nanofiber–graphene nanostructure coupled to dispersive liquid-liquid microextraction for the determination of phthalate esters in water samples

Microchimica Acta - Microextraction in packed syringe (MEPS) was combined with dispersive liquid-liquid microextraction (DLLME) for the extraction of phthalate esters (PEs) from water samples prior...     

Calculation of critical properties for the anisotropic two-layer Ising model on the Kagome lattice: Cellular automata approach

The critical point (K_c) of the two-layer Ising model on the Kagome lattice has been calculated with a high precision, using the probabilistic cellular automata with the Glauber algorithm. The critical point is calculated for different values of the inter- and intra-layer couplings (K₁≠K₂≠K₃≠K_z), where K₁, K₂ and K₃ are the nearest-neighbor interactions within each layer in the 1, 2 and 3 directions, respectively, and K_z is the intralayer coupling. A general ansatz equation for the critical point is given as a function of the inter- and intra-layer interactions, ξ=K₃/K₁,σ=K₂/K₁ and ω=K_z/K₁ for the one- and two-layer Ising models on the Kagome lattice.     

(Liquid + liquid) phase equilibria for (water + 2,3-butanediol + oleyl alcohol) at T = (300.2, 307.2, and 314.2) K

(Liquid + liquid equilibrium) (LLE) data for ternary system: (water + 2,3-butanediol + oleyl alcohol) has been measured at T = (300.2, 307.2, and 314.2) K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The nonrandom two liquids equation (NRTL) was used to correlate the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that NRTL could give a good correlation for the LLE data. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Complexation of 4′-nitrobenzo-15-crown-5 with Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript> and Ba<Superscript>2+</Superscript> metal cations in acetonitrile-methanol binary solutions

The complex formation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, 4′-nitrobenzo-15C5, were studied in acetonitrile (AN)-methanol (MeOH) binary mixtures at different temperatures using conductometric method. The results show that 4′-nitrobenzo-15C5 forms 1:1 [ML] complexes with Mg²⁺, Ca²⁺ and Sr²⁺ metal cations in solutions. But in the case of Ba²⁺ cation a 1:2 [ML₂] complex is formed in these solvent systems. The stability of the complexes is sensitive to the solvent composition and a non-linear behavior was observed for variation of logK _f of the complexes versus the composition of the binary mixed solvents. The stability constants of complexes decrease suddenly with increasing the concentration of methanol in this binary system. The values of thermodynamic parameters (ΔH _c^° and ΔS _c^°) for formation of (4′-nitrobenzo-15C5.Mg)²⁺, (4′-nitrobenzo-15C5.Ca)²⁺ and (4′-nitrobenzo-15C5.Sr)²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that these parameters are affected by the nature and composition of the mixed solvents. A non-linear behavior is observed between the ΔS _c^° and the composition of the mixed solvents.     

Synthesis and stereochemical analysis of some norephedrine‐derived isoxazolidines

The diastereoselectivity in the cycloaddition reactions of several mono‐ and disubstituted alkenes with a (‐)norephedrine‐derived methylenenitrone has been investigated. The stereochemical analysis of the addition products (i.e., isoxazolidines) has been carried out by X‐ray, NMR, and chemical conversions. The NMR spectra of the isoxazolidines at low temperatures indicated the presence of either a single or a predominant invertomer. The stereochemistry of the invertomers and nitrogen inversion barriers are determined using complete line‐shape analysis and their dependence on solvent is discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of Bubble Injection Pattern on the Bubble Size Distribution in a Gas-Solid Fluidized Bed

Three different bubble injection patterns including uniform, center oriented and corner oriented injection patterns over the gas distributor have been studied using a discrete bubble model in a 2-D gas solid fluidized bed. The results show that the bubble size and size distribution evolution through the bed are almost the same for uniform and corner oriented bubble injection patterns, but for the case of center oriented injection pattern, the area weighted average bubble diameter (d _b,21) is greater than the others. The results show that in the center oriented injection pattern, many of the small bubbles leave the bed without coalescence and this leads to smaller d _b,10 than two other cases. Moreover, in this work the size distribution evolution through the bed height is investigated in detail.