Transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si1−xCx nanocomposites mixed with Si nanoparticles and C atoms

Bright-field transmission electron microscopy (TEM) images, high-resolution TEM (HRTEM) images, and fast-Fourier transformed electron-diffraction patterns showed that n-butyl terminated Si nanoparticles were aggregated. The formation of Si_1−xC_x nanocomposites was mixed with Si nanoparticles and C atoms embedded in a SiO₂ layer due to the diffusion of C atoms from n-butyl termination shells into aggregated Si nanoparticles. Atomic force microscopy (AFM) images showed that the Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms existed in almost all regions of the SiO₂ layer. The formation mechanism of Si nanoparticles and the transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms are described on the basis of the TEM, HRTEM, and AFM results. These results can help to improve the understanding of the formation mechanism of Si nanoparticles.     

Depth-controlled reconstruction of 3D integral image using synthesized intermediate sub-images

In this paper, we propose a method that controls the depth of the three-dimensional (3D) object existing over the depth-of-focus in integral imaging. The depth control method is performed only in a computer by synthesizing the intermediate sub-images between original sub-images obtained by transforming the captured elemental images. In the reconstruction process, we can obtain reconstructed 3D images with the better image quality within depth-of-focus than that reconstructed over the depth-of-focus. To demonstrate the feasibility of our method, optical and computational experiments are carried out and its results are presented.     

Effects of in situ plasma treatment on optical and electrical properties of index-matched transparent conducting oxide layer

We investigated the effects of in situ plasma-treatment on optical and electrical properties of index-matched indium tin oxide (IMITO) thin film. To render the IMITO-coated surface hydrophilic and study the optical and electrical characteristics, we performed in situ oxygen plasma post-treatment without breaking vacuum. The 94.6% transmittance in the visible wavelength range (400-700 nm) increased on average to 96.4% and the maximum transmittance reached 98% over a broad wavelength range. The surface roughness and sheet resistance improved from 0.9 nm and 200 Ω/sq to 0.0905 nm and 100 Ω/sq, respectively, by in situ plasma post-treatment. We confirmed by contact angle measurement that the hydrophobic IMITO surface was altered to hydrophilic. The improved optical and electrical characteristics of in situ plasma-treated IMITO makes it adequate for high-resolution liquid crystal on silicon displays.     

Measurement of eye-penalty based on the clock amplitude of transmitted signal

We investigate the relationship between the eye-penalty and the clock amplitude of the transmission signal. The simulation results for return-to-zero (RZ) signals show a good correspondence between the clock amplitude and the eye-penalty. For a non-return-to-zero (NRZ) signal, however, the correspondence between them is satisfied within the reasonable range of the transmission distance. Thus, we can monitor the eye-penalty by measuring the clock amplitude of the transmission signal. The proposed scheme may provide a cost-effective monitoring of the chromatic dispersion-induced signal distortion in optical transmission systems and networks.     

AC Poling study of lead zirconate titanate/vinylidene fluoride-trifluoroethylene composites

It is experimentally known that a polymer matrix phase in a composite of ferroelectric particles dispersed in a ferroelectric polymer can be polarized by using a few cycles of an ac field, without causing much disturbance to the state of polarization of the inclusion particles. This paper attempts to investigate this special poling process for a typical ferroelectric composite system of lead zirconate titanate (PZT) ceramic particles in a vinylidene fluoride-trifluoroethylene (P(VDF-TrFE)) copolymer matrix, upon the application of 10 Hz ac fields of various amplitudes. Compared to a copolymer sample, the composite samples can be polarized at a lower field, and hence show a larger remanent polarization at the same poling field. Among the composites, the observed remanent polarization increases with increasing ceramic volume fraction. These experimental observations can be understood by a simple model, in which space charges are allowed to accumulate at the particle-matrix interfaces because of the electrical conductivity of the constituents. At a fast switching poling field of 10 Hz, the calculation shows that conductivity and charge accumulation effects in the composite are only minimal. Accordingly, although the PZT phase as well as the copolymer phase are both polarized under the ac field, the ceramic phase is only polarized to about 10% when the copolymer phase is almost fully polarized. Thus, one can still use an ac field to polarize only the copolymer phase of the composite without altering the polarization state of the ceramic phase significantly. PACS 77.22.Ej; 77.84.Lf     

Thawing of frozen vegetables observed by a small dedicated MRI for food research

The thawing process for boiled and frozen edible vegetables was traced by a dedicated MRI for food research. The MRI system is small, with a 1.0-T static magnetic field, and can be placed in an ordinary research room with a light air conditioner. Images of green soybeans, broad beans, okra, asparagus and taro were measured by the spin-echo method (echo time=7 ms) with 0.1 or 0.2 s and 1 s repetition times. The images appeared along with the thawing time, and signals uniformly covered the sliced plane of the samples in the thawed condition. Information about the thawing process and tissue structures of the materials was obtained during transit thawing conditions. The thawing kinetics were examined with increased signal intensity, which were divided into two types. The signal increased linearly and saturated for okra and asparagus but exhibited convex curves for soybeans, broad beans and taro. The small MRI was stable, its handling was simple, and the internal structures of food materials could be accurately identified, although the grey-scale of the images was insufficient for determining precise textural fluctuations of tissue organization. We conclude that the devised MRI is useful for examining the quality of frozen foods and for developmental research into frozen foods.     

Kondo effect in magnetic tunnel junctions

Tunneling magnetoresistance was found to be suppressed with decreasing temperature for magnetic tunnel junctions (MTJs) oxidized under high plasma power. A strong temperature dependence of the junction resistance was observed, along with zero-bias anomalies of dynamic resistance at low temperatures. Resistance shows a logarithmic dependence on temperature, and resistance versus temperature exhibits a scaling behavior. Our experimental data can be explained in a consistent way by the Kondo effect in the MTJs with the Kondo temperature TK=20-30 K.     

Vibration analysis of a circular arch with variable cross-section using differential transformation and generalized differential quadrature

Vibration analysis of circular arches is an important subject in mechanics due to its various applications. In particular, circular arches with variable cross-section have been widely used to satisfy modern architectural and structural requirements. Recently, the generalized differential quadrature method (GDQM) and differential transformation method (DTM) were proposed by Shu and Zhou, respectively. In this study, GDQM and DTM are applied to vibration analysis of circular arches with variable cross-section. The governing equation of motion is derived and the non-dimensional natural frequencies are obtained for various boundary conditions. The concepts of differential transformation and generalized differential quadrature are briefly introduced. The results obtained by these methods are compared with previously published works. GDQM and DTM showed fast convergence, accuracy and validity in solving the vibration problem for circular arches with variable cross-sections.