Phosphorylation of phospholipase D1 and the modulation of its interaction with RhoA by cAMP-dependent protein kinase

Agents that elevate cellular cAMP are known to inhibit the activation of phospholipase D (PLD). We investigated whether PLD can be phosphorylated by cAMP-dependent protein kinase (PKA) and PKA-mediated phosphorylation affects the interaction between PLD and RhoA, a membrane regulator of PLD. PLD1, but not PLD2 was found to be phosphorylated in vivo by the treatment of dibutyryl cAMP (dbcAMP) and in vitro by PKA. PKA inhibitor (KT5720) abolished the dbcAMP-induced phosphorylation of PLD1, but dibutyryl cGMP (dbcGMP) failed to phosphorylate PLD1. The association between PLD1 and Val14RhoA in an immunoprecipitation assay was abolished by both dbcAMP and dbcGMP. Moreover, RhoA but not PLD1 was dissociated from the membrane to the cytosolic fraction in dbcAMP-treated cells. These results suggest that both PLD1 and RhoA are phosphorylated by PKA and the interaction between PLD1 and RhoA is inhibited by the phosphorylation of RhoA rather than by the phosphorylation of PLD1.     

Field and flow programming in frit-inlet asymmetrical flow field-flow fractionation

The separation of wide molecular mass (Mr) ranges of macromolecules using frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) has been improved by implementing a combination of field and flow programming. In this first implementation, field strength (governed by the cross flow-rate through the membrane-covered accumulation wall) is decreased with time to obtain faster elution and improved detection of the more strongly retained (high Mr) materials. The channel outlet flow-rate is optionally held constant, increased, or decreased with time. With circulation of the flow exiting the accumulation wall to the inlet frit, the dual programming of cross flow and channel outlet flow could be implemented using just two pumps. With this flow configuration, the channel outlet flow-rate is always equal to the channel inlet flow-rate, and these may be programmed independently of the cross flow-rate through the membrane. FI-AFlFFF retains its operational advantage over conventional asymmetrical flow FFF (AFlFFF). Unlike conventional AFlFFF, FI-AFlFFF does not require time consuming, and experimentally inconvenient, sample focusing and relaxation steps involving valve switching and interruption of sample migration. The advantages of employing dual programming with FI-AFlFFF are demonstrated for sets of polystyrene sulfonate standards in the molecular mass range of 4 to 1000 kDa. It is shown that programmed FI-AFlFFF successfully expands the dynamic separation range of molecular mass.     

Growth promotion of HepG2 hepatoma cells by antisense-mediated knockdown of glypican-3 is independent of insulin-like growth factor 2 signaling

Glypican-3 (GPC3) encodes a cell-surface heparan- sulfate proteoglycan and its expression is frequently silenced in ovarian cancer, mesotheliomas, and breast cancer cell lines and ectopic expression of GPC3 inhibited the growth of these cells, suggesting that GPC3 plays a negative role in cell proliferation. In contrast, up-regulation of GPC3 is often observed in hepatoma, neuroblastoma, and Wilms' tumor. Whether GPC3 plays the same growth inhibitory role in these tumors remains to be studied. Here we report that antisense-mediated knockdown of GPC3 in the HepG2 hepatoma cells significantly promotes the growth of hepatoma cells. In addition, we show that this growth promotion is independent of insulin-like growth factor 2 (IGF2) signaling. Our data suggest that GPC3 plays a growth-suppressing role in hepatoma and provide cell biological evidence inconsistent with the hypothesis that GPC3 acts as a growth suppressor by downregulating IGF2.     

Direct synthesis of aligned silicon carbide nanowires from the silicon substrates

Aligned silicon carbide nanowires were synthesized directly from the silicon substrates via a novel catalytic reaction with a methane-hydrogen mixture at 1,100 degrees C, with a mean diameter of 40 nm and length of 500 microm; they consist of a single-crystalline zinc blende structure crystal in the [111] growth direction; X-ray diffraction, Raman, and infrared spectroscopy confirm the synthesis of high-purity silicon carbide nanowires.     

Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.     

Biomedical significance of endothelial cell specific growth factor, angiopoietin

Until recently, vascular endothelial growth factor (VEGF) was the only growth factor proven to be specific and critical for blood vessel formation. Other long-known factors, such as the fibroblast growth factors (FGFs), platelet-derived growth factor, or transforming growth factor-beta, had profound effects in endothelial cells. But such factors were nonspecific, in that they could act on many other cells, and it seemed unlikely that these growth factors would be effective targets for treatment of endothelial cell diseases. A recently discovered endothelial cell specific growth factor, angiopoietin, has greatly contributed to our understanding of the development, physiology, and pathology of endothelial cells (Davis et al., 1996; Yancopoulos et al., 2000). The recent studies that identified and characterized the physiological and pathological roles of angiopoietin have allowed us to widen and deepen our knowledge about blood vessel formation and vascular endothelial function. Therefore, in this review, we describe the biomedical significance of these endothelial cell growth factors, the angiopoietins, in the vascular system under normal and pathological states.     

Self-assembling structures of long-chain phenyl glucoside influenced by the introduction of double bonds

Four long-chain phenyl glucoside amphiphiles possessing a saturated or unsaturated long alkyl chain group as the self-assembling unit of a highly organized molecular architecture were synthesized. Their self-assembling properties were investigated by EF-TEM, SEM, CD, FT-IR, and XRD. Compound 2 possessing one double bond in the lipophilic portion showed twisted helical fibers, which formed a bilayered structure with a 3.59 nm period, while compound 3 showed the helical ribbons and left-handed nanotubular structures with 150-200 nm inner diameters and ca. 20 nm of wall. Very interestingly, compound 4 possessing three double bonds showed a nanotubular structure with ca. 70 nm of inner diameter through a helical ribbon, which formed a loose bilayered structure with 4.62 nm. These results indicate that self-assembling properties strongly depend on the number of cis double bonds.     

First preparation of biotinylated gradient polyethylene surface to bind photoactive caged streptavidin

A gradient polyethylene (PE) surface was created through corona treatment, in which the corona power increased along the 5 cm length of the PE. The gradient surface was treated with polyethyleneimine and then biotin. Fluorescein-conjugated streptavidin (SAV) caged within 5-carboxymethoxy-2-nitrobenzyl (CMNB) adsorbed onto the biotinylated gradient PE surface following molecular recognition principles. Photoirradiation decomposed the CMNB cage and allowed the fluorescein-conjugated SAV to fluoresce, the intensity of which increased gradually along the PE surface.     

Relationship between microhardness and fluorine contents on tooth enamel determined by PIGE analysis

The remineralization effect of fluoride has been measured by surface microhardness on tooth enamel. The purpose of this study was to investigate the relationship between microhardness and fluorine concentration on tooth enamel. Twelve sound bovine enamel specimens were prepared and immersed in 0.05% NaF solution for 1, 3, 6, 24 and 36 hours, respectively. The concentration of fluorine in specimens were measured by PIGE analysis and surface microhardness of each specimen was measured by surface microhardness tester. Fluorine concentration was increased by immersing time. There was no change in microhardness of each specimen by fluorine content. The results of this study suggest that there was no relationship between the fluorine concentration and surface microhardness in sound tooth enamel. PIGE analysis can be used effectively to assess the remineralization effect of fluorine content in tooth enamel.     

Purification of a primary coolant in a nuclear power plant using a magnetic filter - electrodeionization hybrid separation system

A magnetic filter — continuous electrodeionization (CEDI) hybrid separation system was investigated for the purification of the primary coolant in a nuclear power plant. A magnetic filter system with a 3000 Gauss magnetic field and a CEDI system with a cell consisting of 3 compartments were used for the removal of magnetite and nickel ions, respectively. The hybrid separation system achieved removal rates of 98% for magnetite and 99% for the nickel ions demonstrating its feasibility for the purification of primary coolant.The authors gratefully acknowledge the Basic Atomic Energy Research Institute (BAERI) program at the Korea Institute of Science and Technology Evaluation and Planning (KISTEP) for the financial support to carry out this work.