Applied potential and radiotracer studies on poly(vinyl chloride) matrix ion-selective electrode membranes

This paper reports the effect of applied potentials on PVC matrix membranes containing (i) the barium ion-sensitive barium-Antarox C0880 complex and 2-nitrophenyl phenyl ether solvent mediator, and (ii) the calcium ion-sensitive Orion 92-20-02 phosphate-based calcium liquid ion-exchanger. Platinum electrodes were placed in solutions on each side of the membranes. The barium ion-sensitive membranes are unable to maintain stable current flows but the calcium ion-sensitive membranes are characterized by stable current flows over prolonged periods even after successive polarity reversals. Results are presented, from radiotracer experiments for permeation of ions through the membranes with and without an applied potential. No evidence was found for significant permeation of barium-133 ions through the barium ion-sensing membranes into an initially inactive solution, but it was found that barium-133 ions were incorporated into the membranes after removal of the applied potential. Permeation of sodium-22 ions through the calcium ion-sensing membranes occurred only to a limited extent in the presence of an applied potential and not at all in its absence, confirming electrode selectivity trends for calcium and sodium. Calcium-45 ions did not permeate the calcium ion-sensing membranes into an inactive counter-solution against the potential gradient, but on reversal of the polarity, permeation occurred to a far greater extent than in the absence of an applied potential. These differences in behaviour are compatible with the more complicated membrane pathways of the barium ion-sensing membranes, imposed by the complexing of barium ions by the ethyleneoxy units of Antarox C0880 in a tight helical conformation. The calcium ion-sensing membranes are much less constrained, thus permitting more facile replacement of the calcium ions in the membrane by ions from solution.     

Luminescence determination of benzoquinoline isomers in complex samples

The room-temperature phosphorescence (r.t.p.) and fluorescence spectra of benzoquinoline isomers are investigated. The isomers can be resolved into the linear or angular subgroups on the basis of their fluorescence and r.t.p. spectra by using conventional fixed excitation. Second-derivative and synchronous scanning techniques can be combined to improve the selectivity of the r.t.p. and fluorescence methods. These simple luminescence techniques were used to estimate three benzoquinoline isomers in a coal tar fraction. Direct analysis of this complex sample allowed acridine to be estimated and upper limits to be provided for benzo(h)quinoline and phenanthridine; the presence of three other isomers was not detected. Comparative studies with data obtained by high-performance liquid chromatography are reported.     

Development and publication of work with selective ion-sensitive electrodes

Features concerning development, response, selectivity and applications of selective ion-sensitive electrodes are reviewed. Recommendations are made concerning investigations involving the development and applications of electrodes and attention given to the manner of presenting data for publication.     

On assignment of fundamental vibrational modes of hypophosphite anion and its deuterated analogue

Results of ab initio and density functional theory calculations on the structure and vibrational frequencies of hypophosphite anion indicate earlier experimental assignments of the fundamental vibrational modes are correct while the recent reassignments of several modes proposed by Bickley et al. are inconsistent with the calculated results.     

The Bohlmann-Rahtz route to functionalised pyridine scaffolds and their use in library synthesis

The Bohlmann-Rahtz reaction has been used to prepare 2,3,6-trisubstituted pyridines suitable for use in library synthesis. The synthesis of piperidine substituted nicotinic acid derivative 9 has been optimised and carried out on a large scale to give ca. 500 g of scaffold which was used in the generation of the pyridine library 11.     

Pre-concentration and separation of thorium, uranium, plutonium and americium in human soft tissues by extraction chromatography

An extraction chromatographic method is described for the pre-concentration and separation of thorium, uranium, plutonium and americium in human soft tissues. Tissues such as lung and liver are oven dried at 120°C, ashed at 450°C and the ashed sample is alternately wet (HNO₃/H₂O₂) and dry ashed, and then dissolved in 8M HCl. Because of the complex matrix and large sample samples (up to 1500 g), the actinides were preconcentrated from the tissue solution using the TRU^TM resin (EIChroM) prior to elemental separation by extraction chromatography and determination of americium, plutonium, uranium and thorium by alpha spectrometry. The actinides were eluted from the preconcentration column and each actinide was individually eluted on TEVA^TM and TRU^TM resin columns in a tandem configuration. Actinide activities were then determined by alpha spectrometry after electrodeposition from a sulfate medium. The method was validated by analyzing human tissue samples previously analyzed for americium, plutonium, uranium and thorium in the United States Transuranium and Uranium Registries (USTUR). Two National Institute of Standards and Technology (NIST) Standard Reference Materials, SRM 4351-Human Lung and SRM 4352-Human Liver were also analyzed. United States Transuranium and Uranium Registries, Washington State University, Pullman, WA, 99163, USA.     

Effect of chloride ions on the behaviour of the orion copper(II) ion-selective electrode

The normal shiny surface of a copper(II) ion-selective electrode tarnishes when exposed to chloride ions. Polishing with fine emery cloth easily removes this dull surface layer and fully restores the proper potential response characteristics of the electrode. No such loss of character is evident with a non-chloride based reference electrode except in the presence of added chloride ions. The electrode also seems less affected in premixed solutions of copper(II) and chloride. the chloride ions then being largely bound as copper(II) chloro-complexes.     

The diazo route to diazonamide A: studies on the tyrosine-derived fragment

Various approaches to the tyrosine-derived fragment of the marine secondary metabolite diazonamide A are described. Initial efforts were focused on the originally proposed structure of the natural product, and a feasibility study established that a model 4-aryltryptamine could be readily prepared. Protected 4-bromotryptamine underwent Pd0-catalyzed coupling with the boronic acid derived from 2-bromophenyl allyl ether by Claisen rearrangement, O-methylation and lithiation-boration. The resulting biaryl was elaborated into an alpha-diazo-beta-ketoester, dirhodium(II)-catalyzed reaction of which with N-Z-valinamide gave the desired tryptamine-oxazole following cyclodehydration of the intermediate ketoamide. A potential precursor to the benzofuran ring of the original structure of diazonamide A was prepared in eight steps from N-Z-tyrosine tert-butyl ester. Iodination, O-protection and Stille coupling gave the cinnamyl alcohol 25, converted via the bromide into the allyl aryl ether 27. Subsequent Claisen rearrangement and oxidative cleavage of the alkene gave the lactol 29, converted into the desired benzofuranone 31. The revision in the structure of diazonamide A to 2 resulted in the targeting of an alternative tyrosine-derived model benzofuranone 41 synthesized in four steps from N-Z-tyrosine methyl ester 36 by a route involving Claisen rearrangement of cinnamyl ether 37. Poor yields in this sequence prompted an investigation into the intramolecular Heck reaction as a route to benzofuranone 50. Coupling of 3-iodotyrosine 44 with 2-phenylbutenoic acid 48 gave ester 49 that readily underwent intramolecular Heck reaction to give benzofuranone 50, albeit with poor stereocontrol.     

Numerical study of the accuracy and efficiency of various approaches for Monte Carlo surface hopping calculations

A one-dimensional, two-state model problem with two well-separated avoided crossing points is employed to test the efficiency and accuracy of a semiclassical surface hopping technique. The use of a one-dimensional model allows for the accurate numerical evaluation of both fully quantum-mechanical and semiclassical transition probabilities. The calculations demonstrate that the surface hopping procedure employed accounts for the interference between different hopping trajectories very well and provides highly accurate transition probabilities. It is, in general, not computationally feasible to completely sum over all hopping trajectories in the semiclassical calculations for multidimensional problems. In this case, a Monte Carlo procedure for selecting important trajectories can be employed. However, the cancellation due to the different phases associated with different trajectories limits the accuracy and efficiency of the Monte Carlo procedure. Various approaches for improving the accuracy and efficiency of Monte Carlo surface hopping procedures are investigated. These methods are found to significantly reduce the statistical sampling errors in the calculations, thereby increasing the accuracy of the transition probabilities obtained with a fixed number of trajectories sampled.