Self-assembly reactions between the cis-protected metal corners (N-N)MII (N-N = ethylenediamine, 4,4'-substituted 2,2'-bipyridine; M = Pd, Pt) and the fluorinated edge 1,4-bis(4-pyridyl)tetrafluorobenzene

The self-assembly reactions between the fluorinated ditopic ligand 1,4-bis(4-pyridyl)tetrafluorobenzene (A) and different nitrogen-protected palladium(II) and platinum(II) complexes have been investigated. While dynamic equilibria between molecular triangles and squares were observed when the diimine compounds 4,4'-R2bipy (bipy = 2,2'-bipyridine; R = H, Me, t-Bu) were employed as ancillary ligands, only square species were obtained from ethylenediamine (en) derivatives. Characterization of the obtained metallomacrocycles was accomplished by 1H and 19F NMR spectroscopy in combination with electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR). Molecular dynamics simulations (UFF) have been performed to interpret the influence of the fluorinated ring on the square/triangle relative stability. Density functional calculations using the GIAO method have been employed for the interpretation of the chemical shift assignments. The study of the ability of these compounds to act as hosts of electron-rich aromatic guests has shown that the palladium ethylenediamine square is capable of establishing this type of intermolecular interaction exclusively in aqueous media. The host-guest stoichiometry and association constants have been determinated by 1H NMR spectroscopy.     

Palladium catalyzed Suzuki C-C couplings in an ionic liquid: nanoparticles responsible for the catalytic activity

A new family of functionalized ligands derived from norborn-5-ene-2,3-dicarboxylic anhydride has been used in Suzuki C-C cross-couplings between aryl boronic acids and aryl bromide derivatives in [BMI][PF(6)] (BMI=1-n-butyl-3-methyl-imidazolium), using palladium acetate as catalytic precursor. High conversions and yields are obtained when amine ligands containing hydroxy groups are involved. TEM analyses after catalysis show the formation of small nanoparticles, in contrast to the agglomerates observed when nanoparticles are intentionally preformed, with a consequent decrease in the catalytic activity in the latter case. Some tests, including the correlation effect between solvent and ligand, are carried out to try to identify the true nature of the catalyst. All the results obtained suggest that formation of nanoparticles is required to lead to a catalytically active system.     

Deconvolution of Molecular Weight Distributions Using Dynamic Flory‐Schulz Distributions

Summary: The deconvolution of molecular weight distributions (MWDs) may be useful for obtaining information about the polymerization kinetics and properties of catalytic systems. However, deconvolution techniques are normally based on steady‐state assumptions and very little has been reported about the use of non‐stationary approaches for the deconvolution of MWDs. In spite of this, polymerization reactions are often performed in batch or semi‐batch modes. For this reason, dynamic solutions are proposed here for simple kinetic models and are then used for deconvolution of actual MWD data. Deconvolution results obtained with dynamic models are compared to deconvolution results obtained with the standard stationary Flory‐Schulz distributions. For coordination polymerizations, results show that dynamic MWD models are able to describe experimental data with fewer catalytic sites, which indicates that the proper interpretation of the reaction dynamics may be of fundamental importance for kinetic characterization. On the other hand, reaction dynamics induced by modification of chain transfer agent concentration seem to play a minor role in the shape of the MWD in free‐radical polymerizations.

This Figure illustrates that MWDs obtained at unsteady conditions should not be deconvoluted with standard steady‐state Flory‐Schulz distributions.     

Isothermal curing of an epoxy resin by alternating differential scanning calorimetry

The quasi-isothermal curing of a diepoxide resin with a triamine of polyoxypropylene was studied by alternating differential scanning calorimetry (ADSC), which is a temperature modulated DSC technique. The complex heat capacity measurements allows to analyse the vitrification process at curing temperatures (T_c) below the maximum glass transition of the fully cured epoxy (T_g∞=85.8°C). Initially, the modulus of the complex heat capacity, |C^*_p|, increases until a maximum (conversion between 0.42 and 0.56) and then decreases. This step is followed by an abrupt decay of |C^*_p|, due to the vitrification of the system, which allows the determination of the vitrification time. This value agrees well with that determined by the partial curing method. The phase angle and out-of-phase heat capacity show an asymmetric wide peak during the vitrification process. The change in |C^*_p| at vitrification decreases with the increase of T_c becoming zero at temperature T_g∞. This epoxy-triamine system shows a delay of the vitrification process respect to other model epoxy systems probably due to the presence of polyoxypropylene chains in the network.

The decay of |C^*_p| during vitrification may be normalised between unity and zero by defining a mobility factor. This mobility factor has been used to simulate the reaction rate during the stage where the reaction is controlled by diffusion. The observed reaction rate is simulated by the product of the kinetic reaction rate, determined by the autocatalytic model, and the mobility factor.     

Analysis of organic compounds of water-in-crude oil emulsions separated by microwave heating using comprehensive two-dimensional gas chromatography and time-of-flight mass spectrometry

In this work the higher peak capacity and resolution of comprehensive two-dimensional gas chromatography (GCxGC) has been successfully applied, for the first time, to tentatively identify several polar organic compounds of organic extracts of aqueous phases resulting from microwave demulsification process of water-in-crude oil emulsions. Results have shown that higher temperatures and longer exposure time to microwave irradiation produced water phases with a wider variety of polar organic compounds. The microwave process showed to be suitable for the extraction of several polar compounds classes of petroleum. The proposed microwave extraction method and GCxGC identification of polar compounds of petroleum samples are of practical interest for the petrochemical industry due to corrosion and related problems associated with these polar compounds in refinery equipments. The GCxGC/time-of-flight MS technique shows to be very important in the total separation of different classes of compounds and allows the identification of many compounds in these classes.     

Microwave Effects Due to Anionic or Cationic Initiators in Emulsion Polymerization Reactions

Summary: Emulsion polymerization reactions were performed under microwave irradiation and conventional heating using anionic or cationic initiators and surfactants. Microwave irradiation promoted higher reaction rates for both initiators and surfactants, in comparison with the conventional heating. The effect of high power microwave irradiation was studied using a method of cycles of heating and cooling, where rapid polymerization reactions were obtained. In the reactions with anionic initiator and surfactant, a decrease in the particle diameters was observed with microwave heating, and even smaller particles were obtained using high power microwave irradiation. Moreover, the decrease in the particle size was acompanied by an increase in the polymer molecular weight. On the other hand, these effects were not observed for reactions with cationic initiator and surfactant.