Isothermal curing of an epoxy resin by alternating differential scanning calorimetry

The quasi-isothermal curing of a diepoxide resin with a triamine of polyoxypropylene was studied by alternating differential scanning calorimetry (ADSC), which is a temperature modulated DSC technique. The complex heat capacity measurements allows to analyse the vitrification process at curing temperatures (T_c) below the maximum glass transition of the fully cured epoxy (T_g∞=85.8°C). Initially, the modulus of the complex heat capacity, |C^*_p|, increases until a maximum (conversion between 0.42 and 0.56) and then decreases. This step is followed by an abrupt decay of |C^*_p|, due to the vitrification of the system, which allows the determination of the vitrification time. This value agrees well with that determined by the partial curing method. The phase angle and out-of-phase heat capacity show an asymmetric wide peak during the vitrification process. The change in |C^*_p| at vitrification decreases with the increase of T_c becoming zero at temperature T_g∞. This epoxy-triamine system shows a delay of the vitrification process respect to other model epoxy systems probably due to the presence of polyoxypropylene chains in the network.

The decay of |C^*_p| during vitrification may be normalised between unity and zero by defining a mobility factor. This mobility factor has been used to simulate the reaction rate during the stage where the reaction is controlled by diffusion. The observed reaction rate is simulated by the product of the kinetic reaction rate, determined by the autocatalytic model, and the mobility factor.     

Self-assembly of a tetranuclear Ni4 cluster with an S = 4 ground state: the first 3d metal cluster bearing a mu4-eta2:eta2-O,O carbonate ligand

Reaction of nickel(II) acetate with H(3)L (2-(5-bromo-2-hydroxyphenyl)-1,3-bis[4-(5-bromo-2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) yields [Ni(2)L(OAc)(H(2)O)(2)].3MeCN.2H(2)O (1.3MeCN.2H(2)O), crystallographically characterized. 1 is unstable in solution for a long time and hydrolyzes to give [Ni(2)L(o-OC(6)H(3)BrCHO)(H(2)O)].2.25MeCN.H(2)O (2.2.25MeCN.H(2)O). In addition, 1 uptakes CO(2) from air in a basic methanol/acetonitrile solution, yielding [[Ni(2)L(MeOH)](2)(CO(3))].1.5MeOH.MeCN.H(2)O (3.1.5MeOH.MeCN.H(2)O). The X-ray characterization of 3 reveals that it is a tetranuclear nickel cluster, which can be considered as the result of a self-assembly process from two dinuclear [Ni(2)L](+) blocks, joined by a mu(4)-eta(2):eta(2)-O,O carbonate ligand. The coordination mode of the carbonate anion is highly unusual and, to the best of our knowledge, it has not been described thus far for first-row transition metal complexes or magnetically studied until now. Magnetic characterization of 1 and 3 shows net intramolecular ferromagnetic coupling between the metal atoms in both cases, with S = 2 and S = 4 ground states for 1 and 3, respectively.     

Conformational study of the 1,2,3-propanetriol (glycerol) in the channel of the aquaglyceroporin GlpF

The X-ray structure of the aquaglyceroporin GlpF protein refined by Fu et al. [D. Fu, A. Libson, L.J.W. Miercke, C. Weitzman, P. Nollert, J. Krucinski, R.M. Stroud, Science 290 (2000) 481--486.] shows three glycerol molecules co-crystallized inside the channel. The conformations of these molecules have been used to study the relationship between conformation, energy balance and hydration in the hope that it will provide insight into the molecular transport mechanism in the channel. Initially, the position of the hydrogen atoms of the glycerol molecule in the three conformations was established. As the glycerol molecule progressively loses its hydration waters in its transport pathway inside the channel, the nature of the glycerol bonds changes: the geometry of the alkyl backbone adapts to the available space while the progressive dehydration is partially compensated by the formation of intramolecular hydrogen bonds. The nature of these hydrogen bonds has been established by DFT calculation of the rotation barriers of the hydroxyl groups. Finally, the influence of the intramolecular hydrogen bonds on the conformation of the alkyl backbone has been established by quantum calculations of potential energy surfaces by semi-empirical quantum calculations PM3/Zindo.     

Vitrification during the isothermal cure of thermosets

The process of vitrification that occurs during the isothermal cure of a cross-linking system at temperatures below T _g∞, the glass transition temperature of the fully cured resin, has been studied by TOPEM, a new temperature modulated DSC (TMDSC) technique based upon the use of stochastic temperature pulses. A comparison is made between TOPEM and another TMDSC technique, and some advantages of TOPEM are considered. The TOPEM technique is used to show that the mobility factor is not always a reliable approach to predicting the cure rate during vitrification, in view of its frequency dependence. Also, the dependence of the apparent vitrification time on frequency is examined. There appears to be a non-linear relationship between the apparent vitrification time and log(frequency), which is further discussed in the second part of this series.     

C-H bond activation and subsequent C-C bond formation promoted by osmium: 2-vinylpyridine-acetylene couplings

Complex OsH2Cl2(PiPr3)2 promotes the C-H activation of 2-vinylpyridine and subsequently couples the activated substrate with a second 2-vinylpyridine and two acetylene molecules. In the absence of 2-vinylpyridine, the activated substrate is coupled with an acetylene unit to afford a 2-butadienylpyridine derivative.     

Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

Adaptative Biaryl Phosphite–Oxazole and Phosphite–Thiazole Ligands for Asymmetric Ir‐Catalyzed Hydrogenation of Alkenes

A library of readily available phosphite–oxazole/thiazole ligands ( L1 a – g – L7 a – g ) was applied in the Ir‐catalyzed asymmetric hydrogenation of several largely unfunctionalized E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The ability of the catalysts to transfer chiral information to the product could be tuned by choosing suitable ligand components (bridge length, the substituents in the heterocyclic ring and the alkyl backbone chain, the configuration of the ligand backbone, and the substituents/configurations in the biaryl phosphite moiety), so that enantioselectivities could be maximized for each substrate as required. Enantioselectivities were therefore excellent (enantiomeric excess (ee) values up to >99 %) for a wide range of E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The biaryl phosphite moiety was a very advantageous ligand component in terms of substrate versatility.     

Kinetico‐Mechanistic Insights on the Assembling Dynamics of Allyl‐Cornered Metallacycles: The PtNpy Bond is the Keystone

The square‐like homo‐ and heterometallamacrocycles [{Pd(η³‐2‐Me‐C₃H₄)( L ⁿ )₂}₂{M(dppp)}₂](CF₃SO₃)₆ (dppp=1,3‐bis(diphenylphosphino)propane) and [{Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂}₂{M(PPh₃)₂}₂](CF₃SO₃)₆ [py=pyridine, M=Pd, Pt, L ^{n =}4‐PPh₂py ( L¹ ), 4‐C₆F₄PPh₂py ( L² )] containing allyl corners were synthesised by antisymbiotic self‐assembly of the different palladium and platinum metallic corners and the ambidentate N,P ligands. All the synthesised assemblies displayed a complex dynamic behaviour in solution, the rate of which is found to be dependent on the electronic and/or steric nature of the different building blocks. A kinetico‐mechanistic study by NMR line shape analysis of the dynamics of some of these assemblies was undertaken in order to determine the corresponding thermal activation parameters. Both an enhanced thermodynamic stability and slower dynamics were observed for platinum‐pyridine‐containing species when compared with their palladium analogues. Time‐dependent NMR spectroscopy in combination with ESI mass spectrometry was used to study the exchange between the assemblies and their building blocks, as well as that occurring between different metallamacrocycles. Preliminary studies were carried out on the activity of some of the metallamacrocyclic compounds as catalytic precursors in the allylic substitution reaction, and the results compared with that of the monometallic allylic corner [Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂]⁺.     

Novel bis-betaines and betaines within [1(4)]meta-heterophane frameworks

After prior selection of betaine building blocks for the construction of quadrupolar heterophane frameworks, a convergent "3+1" synthetic strategy is reported for the synthesis of the title macrocycles composed of heterocyclic betaine subunit(s). These typify the first example of simple cyclophanes constructed out of both highly pi-excessive and highly pi-deficient heteroaromatic moieties linked in a 1,3-alternating fashion. The chemical reactivity of the quadrupolar heterophanes 1a and 1c toward electrophiles under neutral conditions corroborated their bis-betaine structure. The structural features of the bis-betaines 1, betaines 2 x PF6 and 5 x X, and the corresponding dicationic [1(4)]heterophanes 3 x 2X and 4 x 2Cl were studied by 1H and 13C NMR spectroscopy and electrospray ionization mass spectrometry, and confirmed by single-crystal X-ray diffraction analysis of macrocycles 1a and 2a x PF6.     

Multivariate resolution of NMR labile signals by means of hard- and soft-modelling methods

One of the difficulties frequently encountered when studying acid–base equilibria with NMR spectroscopy is the labile behaviour of the measured signal, which hinders the application of bilinear multivariate data analysis methods. In this work, a mathematical transformation is proposed for the conversion of NMR labile signals to inert signals, which make possible the application of multivariate data analysis methods, based on bilinear data models. The procedure has been applied to the analysis of NMR data corresponding to the acid–base equilibria of nucleotides dCMP and dGMP. Both hard-modelling (EQUISPEC) and soft-modelling (MCR-ALS) approaches have been applied for the analysis and resolution of transformed bilinear NMR data matrices.