Prediction of extraction efficiency in supported liquid membrane with a stagnant acceptor phase by means of artificial neural network

An artificial neural network model of supported liquid membrane extraction process with a stagnant acceptor phase is proposed. Triazine herbicides and phenolic compounds were used as model compounds. The model is able to predict the compound extraction efficiency within the same family based on the octanol–water partition coefficient, water solubility, molecular mass and ionisation constant of the compound. The network uses the back‐propagation algorithm for evaluating the connection strengths representing the correlations between inputs (octanol–water partition coefficients logP, acid dissociation constant pK_a, water solubility and molecular weight) and outputs (extraction efficiency in dihexyl ether and undecane as organic solvents). The model predicted results in good agreement with the experimental data and the average deviations for all the cases are found to be smaller than ±3%. Moreover, standard statistical methods were applied for exploration of relationships between studied parameters.     

Diastereo‐ and Enantioselective Synthesis of Organometallic Bis(helicene)s by a Combination of C?H Activation and Dynamic Isomerization

Homochiral and heterochiral cis‐bis‐cycloplatinated‐[6]helicene derivatives 1 b^{1, 2} , as representative examples of platina[6]helicenes that share a common platinum center, have been prepared. A diastereo‐ and enantioselective synthesis, which combines CH activation and dynamic isomerization from heterochiral structure 1 b² into homochiral structure 1 b¹ , is also described. Overall, this isomerization process results in the transfer of chiral information from one helicene moiety to the other one. The chiroptical properties of homochiral (P)‐ and (M)‐ 1 b¹ were greatly modified upon oxidation into their corresponding (P)‐ and (M)‐diiodo‐Pt^IV complexes ( 5 ). The changes were also analyzed by performing theoretical calculations. C? H activation in the synthesis of organometallic helicenes is further demonstrated by the preparation of cis‐bis‐cycloplatinated‐[8]helicene 1 c .     

Liquid crystalline properties of 4‐hexyloxybenzylidene‐4′‐alkyloxyanilines

The liquid‐crystalline polymorphism of the homologous series of 4‐hexyloxybenzylidene‐4′‐alkyloxyanilines is investigated. Basing on the polarization microscopy (POM, TOA), the DSC calorimetry and miscibility studies the following mesophases were detected: nematic, smectic A, smectic C and smectic I. The phase diagrams of the compounds of these series with 4‐hexyloxybenylidene‐4′‐pentylaniline (as the standard of mesophases) show induction of the smectic F mesophases. Their dependence on the alkyl chain length and mole fraction is shown.     

The hydration of the uranyl dication: Incorporation of solvent effects in parallel density functional calculations with the program PARAGAUSS

The parallel density functional program PARA GAUSS has been extended by a tool for computing solvent effects based on the conductor‐like screening model (COSMO). The molecular cavity in the solvent is constructed as a set of overlapping spheres according to the GEPOL algorithm. The cavity tessellation scheme and the resulting set of point charges on the cavity surface comply with the point group symmetry of the solute. Symmetry is exploited to reduce the computational effort of the solvent model. To allow an automatic geometry optimization including solvent effects, care has been taken to avoid discontinuities due to the discretization (weights of tesserae, number of spheres created by GEPOL). In this context, an alternative definition for the grid points representing the tesserae is introduced. In addition to the COSMO model, short‐range solvent effects are taken into account via a force field. We apply the solvent module to all‐electron scalar‐relativistic density functional calculations on uranyl, UO₂²⁺, and its aquo complexes in aqueous solution. Solvent effects on the geometry are very small. Based on the model [UO₂(H₂O)₅]²⁺, the solvation energy of uranyl is estimated to be about ?400 kcal/mol, in agreement with the range of experimental data. The major part of the solvation energy, about ?250 kcal/mol, is due to a donor–acceptor interaction associated with a coordination shell of five water ligands. One can interpret this large solvation energy also as a compounded effect of an effective reduction of the uranyl moiety plus a solvent polarization. The energetic effect of the structure relaxation in the solution is only about 8 kcal/mol. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

A molecular mechanics study of the effect of substitution in position 1 on the conformational space of the oxytocin/vasopressin ring

Summary The effect of the substitution in position 1 on the low-energy conformations of the oxytocin/vasopressin 20-membered ring was investigated by means of molecular mechanics. Three representative substitutions were considered: -mercapto-,-dimethyl)propionic acid (Dmp), (-mercapto-,-cyclopentamethylene)propionic acid (Cpp), both forming strong antagonists, and (,-dimethyl--mercapto)propionic acid (-Dmp), forming analogs of strongly reduced biological activity, with the -mercaptopropionic (Mpa) residue taken as reference. Both ECEPP/2 (rigid valence geometry) and AMBER (flexible valence geometry) force fields were employed in the calculations. Three basic types of backbone conformations were taken into account which are distinguished by the type of -turn at residues 3 and 4: 1/III, II, and I/III, all types containing one or two intra-annular hydrogen bonds. The allowed (ring-closed) disulfide-bridge conformations were searched by an algorithm formulated in terms of scanning the disulfide-bridge torsional angle C-S-S-C. The ECEPP/2 and AMBER energies of the obtained conformations were found to be in reasonable agreement. Two of the low-energy conformers of the [Mpa¹]-compound agreed very well with the cyclic part of the two conformers found in the crystal structure of [Mpa¹]-oxytocin. An analysis of the effect of -substitution on relative energies showed that the conformations with the N-C-CH₂-CH₂ (₁) and C-CH₂-CH₂-S (₁) angles of the first residue around (–100°, 60°) and (100°, –60°) are not affected; this in most cases implies a left-handed disulfide bridge. In the case of -substitution the allowed values of ₁ are close to ± 60°. This requirement, being in contradiction to the one concerning -substitution, could explain the very low biological activity of the -substituted analogs. The conformational preferences of substituted compounds can largely be explained by the analysis of local interactions within the first residue. Based on the selection of the conformations which are low in energy for both the reference and -substituted compounds, two distinct types of possible binding conformations were proposed, the first one being similar to the crystal conformer with a left-handed disulfide bridge, the second one having a right-handed bridge, but a geometry different from that of the crystal conformer with the right-handed bridge. The first type of disulfide-bridge arrangement is equally favorable for both I/III and II types of backbone structure, while the second one is allowed only for the II type of backbone. No conformation of the I/III type has a low enough energy to be considered as a possible binding conformation for all of the active compounds studied in this work.     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.     

Influence of the degree of ionization on the growth mechanism of poly(diallyldimethylammonium)/poly(acrylic acid) multilayers

pH‐dependent growth laws of the mass coverage Γ(n) of poly(diallyldimethylammonium) chloride and poly(acrylic acid) (PAA) layer‐by‐layer films are analyzed by Quartz Crystal Microbalance‐D. (Attenuated Total Reflection)‐FTIR spectroscopy shows a degree of dissociation of acrylic acid groups in the films identical to that in solution. Apart from pH‐regimes of differently pronounced exponential and linear growth, the corresponding kinetics indicate pH‐dependent adsorption, reorganization, and diffusion processes. As the thickest films form with almost uncharged PAA (low pH), the results can only partly be explained by the dissociation degree of PAA in the film. For intermediate and high pH values chain interdiffusion as a mechanism for nonlinear growth is strongly dependent on the charge density of the PAA chains. However, at low pH other types of interactions, most likely ion–dipole interactions, play a major role in the multilayer growth. Furthermore, a change in the symmetry of growth can be observed in the low to intermediate pH range. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 425–434     

Comparison of the Microbiological Activities of Different Varieties of Hop (Humulus lupulus) Extracts by Thin-Layer Chromatography—Direct Bioautography

JPC – Journal of Planar Chromatography – Modern TLC - Commercially available hop pellets of different origins were extracted by use of ethanol and water, chromatographed on silica...     

Regioselective formation of β‐(E)‐ and α‐alkenylsilane moiety attached to silsesquioxane core via Pt‐ and Ru‐based hydrosilylation

The first attempts to use ethynylsiloxysilsesquioxanes as reagents for hydrosilylation in the presence of Pt‐ and Ru‐based catalysts are reported. The results obtained strongly depend on the catalytic system used. The catalysts are proved to promote regioselective introduction of β‐(E)‐ and α‐fragments of the alkenylsilane group to the silsesquioxane core. The favourable features of these catalytic systems are their high selectivity and the requirement for relatively mild conditions. This methodology was also successfully applied to dihydro‐substituted organosilicon compounds to obtain a new class of silsesquioxane‐based compounds.