Liquid Formulations for Long-Term Storage of Monoclonal IgGs

Proteins like immunoglobulin (IgGs) are prone to degradation by a variety of pathways. In this study, a stabilizing formulation for long-term storage of a panel of seven monoclonal IgGs was found using differential scanning calorimetry (DSC). In the chosen formulations, the IgGs were subjected to stress, accelerated and real-time storage, and analyzed by size exclusion chromatography to determine fragment and aggregate content, and fluorescence-activated cell sorting to measure immunoreactivity. All IgGs showed the greatest conformational stability near their isoelectric point which was enhanced by adding sorbitol, sucrose, glycine, and sodium chloride. Optimized formulations, found by DSC, containing 20 % sorbitol and 1 M glycine prevented IgG aggregation and fragmentation and conserved immunoreactivity against shear stress, multiple freeze–thaw cycles, accelerated storage at 37 °C, and 12 months storage at 4 and ?20 °C. Relatively poor thermal stability of the antigen-binding fragment domain was shown to limit storage stability of IgGs. This study confirms the predictive power of DSC to find storage formulations which protect IgGs during stress and long-term storage from aggregation and degradation. Liquid formulations found in this study may have a broad utility for other IgGs.     

Fenugreek mucilage as a flocculating agent for sewage treatment

The use of fenugreek mucilage, a natural polysaccharide and a direct food additive, as a flocculating agent for removal of suspended and dissolved solids from sewage effluent has been reported. A flocculation study has been done by the standard jar test method. The percent removal of suspended solid (SS) and dissolved solid (TDS) was determined by varying the polymer dose, pH and contact time. X-ray diffraction patterns of the solid waste material of mucilage and flocs (so obtained after treatment) were used to suggest the incorporation of the crystalline waste material in the mucilage. The optimal mucilage concentration was found to be 0.16 mg/l. The suitable pH range for maximum solid removal (SS and TDS) was alkaline and the time required for treatment was 1-3 h.     

Comparative studies in subsolidus areas of ternary oxide systems PbO–V2O5–In2O3 and PbO–V2O5–Fe2O3

Thermal stability of PbO was studied. Reactivity of oxides in the systems PbO–M₂O₃ (M = In, Fe) was investigated up to 650 °C. Using the DTA and XRD methods, parts of investigated ternary oxide systems, labelled by compounds: V₂O₅, Pb₈V₂O₁₃ and M₂O₃ (M = In, Fe), have been divided into partial ternary systems. IR spectra of compounds Pb₂MV₃O₁₁ (M = In, Fe) have been compared.     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.     

Non-isothermal degradation kinetics of PLA-functionalized gum (fG) biocomposite with dicumyl peroxide (DCP)

Journal of Thermal Analysis and Calorimetry - In the present investigation, gene expression programming (GEP) is used to predict thermal conductivity of nanofluids consisting of $$hbox {Al}_2hbox...     

CyClick Chemistry for the Synthesis of Cyclic Peptides

Here, we report a novel “CyClick” strategy for the macrocyclization of peptides that works in an exclusively intramolecular fashion thereby precluding the formation of dimers and oligomers via intermolecular reactions. The CyClick chemistry is highly chemoselective for the N‐terminus of the peptide with a C‐terminal aldehyde. In this protocol, the peptide conformation internally directs activation of the backbone amide bond and thereby facilitates formation of a stable 4‐imidazolidinone‐fused cyclic peptide with high diastereoselectivity (>99 %). This method is tolerant to a variety of peptide aldehydes and has been applied for the synthesis of 12‐ to 23‐membered rings with varying amino acid compositions in one pot under mild reaction conditions. The reaction generated peptide macrocycles featuring a 4‐imidazolidinone in their scaffolds, which acts as an endocyclic control element that promotes intramolecular hydrogen bonding and leads to macrocycles with conformationally rigid turn structures.     

Cellulose synthesis in maize: isolation and expression analysis of the cellulose synthase (CesA) gene family

Stalk lodging in maize results in significant yield losses. We have determined that cellulose per unit length of the stalk is the primary determinant of internodal strength. An increase in cellulose concentration in the wall might allow simultaneous improvements in stalk strength and harvest index. Cellulose formation in plants can be perturbed by mutations in the genes involved in cellulose synthesis, post-synthetic cellulose alteration or deposition, N-glycosylation, and some other genes with as yet unknown functions. We have isolated 12 members of the cellulose synthase (CesA) gene family from maize. The genes involved in primary wall formation appear to have duplicated relatively independently in dicots and monocots. The deduced amino acid sequences of three of the maize genes, ZmCesA10–12, cluster with the Arabidopsis CesA sequences that have been shown to be involved in secondary wall formation. Based on their expression patterns across multiple tissues, these three genes appear to be coordinately expressed. The remaining genes show overlapping expression to varying degrees with ZmCesA1, 7, and 8 forming one group, ZmCesA3 and 5 a second group, and ZmCesA2 and 6 exhibiting independent expression of any other gene. This suggests that the varying levels of coexpression may just be incidental except in the case of ZmCesA10–12, which may interact with each other to form a functional enzyme complex. Isolation of the expressed CesA genes from maize and their association with primary or secondary wall formation has made it possible to test their respective roles in cellulose synthesis through mutational genetics or transgenic approaches. This information would be useful in improving stalk strength.     

Phospholipid mesophases at solid interfaces: in-situ X-ray diffraction and spin-label studies

In this work, we report on recent investigations, both on the global and on the local molecular architecture of supported phospholipid model membranes. A brief theoretical introduction explains how global structural information on supramolecular lipid ensembles can be retrieved from surface X-ray diffraction measurements as well as how spin-label electron paramagnetic resonance spectroscopy (EPR) provides complementary information on the local environment of probe molecules. The combination of especially designed X-ray cells with the technique of small- and wide-angle X-ray surface scattering makes it possible to explore various fields of lipid research and its applications. Examples for different physico-chemical conditions are presented: (i) in situ chemistry under excess of water conditions demonstrating how solid-supported lipid films sense salinity, (ii) the 3D electron density reconstruction of a vesicle-fusion intermediate under controlled humidity, and (iii) complementary temperature and pressure effects on oriented phospholipid samples. Further, special attention has been given to the influence of different film preparation techniques with respect to quality and the defect structure manifestation. To resolve the proportions and local properties of defects in a hydrated lipid-deposited surface, spin-label EPR was applied. The results from 9.6 GHz EPR as well as from 1.2 GHz EPR suggest the alignment to be in the range between 30% and 80%. In addition, slow time-dependent EPR measurements point to nano-structural rearrangements due to water flow and reduction of alignment quality.