Synthesis of 3‐(Pyridin‐4‐Ylmethyl)‐4‐Substituted‐1,2,4‐Triazoline‐5‐Thione

The reaction of the hydrazide of pyridine‐4‐acetic acid with isothiocyanate gave thiosemicarbazide derivatives respectively. Further cyclization with 2% NaOH led to the formation of 4‐substituted 3‐(pyridin‐4‐ylmethyl)‐1,2,4‐triazoline‐5‐thione and 3‐(pyridin‐4‐ylmethyl)‐1,2,4‐triazoline‐5‐thione. The structures of all new products were confirmed by analytical and spectroscopic methods.     

Measurements and Utilization of Consistent Gibbs Energies of Transfer of Single Ions: Towards a Unified Redox Potential Scale for All Solvents

Utilizing the “ideal” ionic liquid salt bridge to measure Gibbs energies of transfer of silver ions between the solvents water, acetonitrile, propylene carbonate and dimethylformamide results in a consistent data set with a precision of 0.6 kJ mol⁻¹ over 87 measurements in 10 half-cells. This forms the basis for a coherent experimental thermodynamic framework of ion solvation chemistry. In addition, we define the solvent independent - and the values that account for the electronating potential of any redox system similar to the value of a medium that accounts for its protonating potential. This scale is thermodynamically well-defined enabling a straightforward comparison of the redox potentials (reducities) of all media with respect to the aqueous redox potential scale, hence unifying all conventional solvents′ redox potential scales. Thus, using the Gibbs energy of transfer of the silver ion published herein, one can convert and unify all hitherto published redox potentials measured, for example, against ferrocene, to the scale.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

Speciation of cationic selenium compounds in Brassica juncea leaves by strong cation-exchange chromatography with inductively coupled plasma mass spectrometry

Strong cation-exchange chromatography (SCX-HPLC) was used in conjunction with inductively coupled plasma mass spectrometry (ICP-MS) to investigate cationic selenium species present in leaf extract of wild-type Brassica juncea supplemented with selenite. Total amount of Se accumulated by the leaves was found to be 352 microg g(-1). Cation-exchange solid-phase extraction (SCX-SPE) was used to pre-concentrate the cationic species present in the leaf extract. Methylselenomethionine (MeSeMet) and dimethylselenoniumproprionate (DMSeP) were synthesized and characterized by electrospray quadrupole time-of-flight MS (ESI-QTOF-MS). Laboratory synthesized and commercially available standards were used in chromatographic studies to identify the Se species in the leaf extract through retention time comparisons and standard addition method. Major cationic selenium species identified in the present study were MeSeMet and methylselenocysteine (MeSeCys) while selenomethionine (SeMet) was found in minor quantities.     

Detection of traces of oxidized and reduced sulfur compounds in small samples by combination of different high-performance liquid chromatography methods

Depending on the sulfur species, picomoles of different inorganic sulfur compounds can be detected and separated by HPLC in one arrangement in a sample volume less than 50 μl. The combination of fluorescence labelling of reduced inorganic sulfur compounds such as sulfide (S²⁻), sulfite(SO₃²⁻ and thiosulfate (S₂O₃²⁻) with monobromobimane followed by an extraction of elemental sulfur (S°) by chloroform treatment enables the detection of all mentioned sulfur compounds as well as sulfate (remaining aqueous phase) in the same sample. While the derivatized sulfur compounds could be detected by their fluorescence emission at 480 nm, elemental sulfur is identified by its UV absorption at 263 nm. Sulfate in the remaining aqueous phase is detected by HPLC with indirect UV detection at 254 nm. Detection ranges for the different sulfur compounds examined are as follows: sulfide (5 μM to 1.5 mM), sulfite (5 μM to 1.0 mM), thiosulfate (1 μM to 1.5 mM), elemental sulfur (2 μM to 32 mM) and sulfate (5 μM to >1 mM).     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

The hydration of the uranyl dication: Incorporation of solvent effects in parallel density functional calculations with the program PARAGAUSS

The parallel density functional program PARA GAUSS has been extended by a tool for computing solvent effects based on the conductor‐like screening model (COSMO). The molecular cavity in the solvent is constructed as a set of overlapping spheres according to the GEPOL algorithm. The cavity tessellation scheme and the resulting set of point charges on the cavity surface comply with the point group symmetry of the solute. Symmetry is exploited to reduce the computational effort of the solvent model. To allow an automatic geometry optimization including solvent effects, care has been taken to avoid discontinuities due to the discretization (weights of tesserae, number of spheres created by GEPOL). In this context, an alternative definition for the grid points representing the tesserae is introduced. In addition to the COSMO model, short‐range solvent effects are taken into account via a force field. We apply the solvent module to all‐electron scalar‐relativistic density functional calculations on uranyl, UO₂²⁺, and its aquo complexes in aqueous solution. Solvent effects on the geometry are very small. Based on the model [UO₂(H₂O)₅]²⁺, the solvation energy of uranyl is estimated to be about ?400 kcal/mol, in agreement with the range of experimental data. The major part of the solvation energy, about ?250 kcal/mol, is due to a donor–acceptor interaction associated with a coordination shell of five water ligands. One can interpret this large solvation energy also as a compounded effect of an effective reduction of the uranyl moiety plus a solvent polarization. The energetic effect of the structure relaxation in the solution is only about 8 kcal/mol. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Bimetallic Gold(I) Complexes with Ethynyl‐Helicene and Bis‐Phosphole Ligands: Understanding the Role of Aurophilic Interactions in their Chiroptical Properties

Monometallic gold(I)‐alkynyl‐helicene complexes ( 1 a , b ) and bimetallic gold(I)‐alkynyl‐helicene architectures featuring the presence ( 2 a , b ) or absence ( 3 a , b ) of aurophilic intramolecular interactions were prepared by using different types of phosphole ligands (mono‐phosphole L1 or bis‐phospholes L2 , 3 ). The influence of the Au^I d¹⁰ metal center(s) on the electronic, photophysical, and chiroptical properties of these unprecedented phosphole‐gold(I)‐alkynyl‐helicene complexes was examined. Experimental and theoretical results highlight the importance of ligand‐to‐ligand‐type charge transfers and the strong effect of the presence or absence of Au^I–Au^I interactions in 2 a , b .     

Multilayer Films with Nanocontainers: Redox‐Controlled Reversible Encapsulation of Guest Molecules

Stable multilayer films with cucurbit[8]uril have been fabricated on the basis of the alternating layer‐by‐layer assembly of a novel side‐chain pseudopolyrotaxane and a photoreactive polyanion. The as‐prepared multilayer films exhibit good properties as surface‐imprinted multilayers, because cucurbit[8]uril molecules that are locked inside the multilayers can act as nanocontainers with specific binding to certain guest molecules, and the loading and release of the guest is redox‐controllable and reversible.