Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

Tale of the Breslow intermediate,a central player in N-heterocyclic carbene organocatalysis: then and now

N-Heterocyclic carbenes (NHCs) belong to the popular family of organocatalysts used in a wide range of reactions, including that for the synthesis of complex natural products and biologically active compounds. In their organocatalytic manifestation, NHCs are known to impart umpolung reactivity to aldehydes and ketones, which are then exploited in the generation of homoenolate, acyl anion, and enolate equivalents suitable for a plethora of reactions such as annulation, benzoin, Stetter, Claisen rearrangement, cycloaddition, and C–C and C–H bond functionalization reactions and so on. A common thread that runs through these NHC catalyzed reactions is the proposed involvement of an enaminol, also known as the Breslow intermediate, formed by the nucleophilic addition of an NHC to a carbonyl group of a suitable electrophile. In the emerging years of NHC catalysis, enaminol remained elusive and was largely considered a putative intermediate owing to the difficulties encountered in its isolation and characterization. However, in the last decade, synergistic efforts utilizing an array of computational and experimental techniques have helped in gaining important insights into the formation and characterization of Breslow intermediates. Computational studies have suggested that a direct 1,2-proton transfer within the initial zwitterionic intermediate, generated by the action of an NHC on the carbonyl carbon, is energetically prohibitive and hence the participation of other species capable of promoting an assisted proton transfer is more likely. The proton transfer assisted by additives (such as acids, bases, other species, or even a solvent) was found to ease the kinetics of formation of Breslow intermediates. These important details on the formation, in situ detection, isolation, and characterization of the Breslow intermediate are scattered over a series of reports spanning well over a decade, and we intend to consolidate them in this review and provide a critical assessment of these developments. Given the central role of the Breslow intermediate in organocatalytic reactions, this treatise is expected to serve as a valuable source of knowledge on the same.

Molecular insights on the formation, detection, and even isolation of the Breslow intermediate, which is the most important species in N-heterocyclic carbene (NHC) catalysis, as obtained from experimental and computational studies, are presented.     

Determination of total carbon and total organic carbon from volatile air pollutants

Summary The method developed based on the determination of TC and TOC in the form of the total amount of CO₂ requires application of the proper techniques for the final determination of CO₂. The possibility of using a stream of carrier gas at a convenient flow-rate for desorbing quantitatively CO₂ concentrated on a molecular sieve permits use of a wide variety of known analytical techniques for the final determination of CO₂. Various methods were compared on the basis of both absolute and calibration measurements. The absolute methods chosen were gravimetric (classical or an automated version based on application of a gravimetric automat and automatic recording balance), thermogravimetric analysis and coulometry. The calibration methods included thermal conductivity, the flame-ionization detector (after conversion of CO₂ into methane) and infrared absorption. Usefulness of the methods was evaluated on the basis of comparative statistical analysis of experimental data with respect to precision (Snedecor'sF-test and Bartlett'sU ²-test) and accuracy (Student'st-test).

---

Zusammenfassung Das entwickelte Verfahren zur Bestimmung des TC- und TOC-Gehaltes in Form der gesamten Menge CO₂ erfordert die Anwendung geeigneter Analysentechniken zur Endbestimmung dieser Verbindung. Die Möglichkeit einer Desorption des am Molekularsieb angereicherten CO₂ in einem Gasstrom mit geeignetem Durchfluß erlaubt zur Endbestimmung von CO₂ die Anwendung einer Reihe verschiedener Analysenverfahren. Die Anwendbarkeit verschiedener, auf Absolutverfahren und auch auf relativen Messungen beruhender Methoden wurde vergleichend untersucht. Die folgenden Methoden zur CO₂-Bestimmung wurden gewählt: die Gravimetrie (klassische oder automatisierte unter Einsatz eines Wägeautomaten und einer registrierenden Waage), die Thermogravimetrie und die Coulometrie. Von den relativen Methoden wurden die Thermokonduktometrie, der Flammenionisationsdetektor (nach Umsetzung von CO₂ zu Methan) und das IR-Absorptionsmeßverfahren geprüft. Die Anwendbarkeit der Methoden wurde mit Hilfe statistischer Prüfverfahren beurteilt, wobei die Präzision (SnedecorsF-Test und BartlettsU ²-Test) und die Genauigkeit (Studentst-Test) der erhaltenen Analysenwerte verglichen wurden.

     

The potential of inductively coupled plasma-mass spectrometric detection for capillary electrophoretic analysis of pesticides

In this work, the potential of inductively coupled plasma-mass spectrometry (ICP-MS) coupled to capillary electrophoresis (CE) to determine organophosphorus pesticides (OPPs) is demonstrated. Element specific detection of (31)P with ICP-MS is performed for the detection of OPPs. Three common OPPs, including glyphosate, glufosinate, and aminomethylphosphonic acid (AMPA), were analyzed by CE-ICP-MS to demonstrate its applicability for the analysis of OPPs. The advantages of using ICP-MS with respect to other common detectors, such as flame photometric detection (FPD), for CE analysis of OPPs are shown. Additionally, different CE separation conditions were studied to achieve complete baseline separation of the pesticide compounds in short migration times. Two CE buffer systems were evaluated for the separation of OPPs using ICP-MS detection. A buffer solution containing 40 mmol.L(-1) ammonium acetate at pH 9.0 and an applied voltage of +20 kV were finally selected leading to a separation time of 10.0 min. Both migration time and area relative standard deviations (%RSD) were evaluated and their respective values were in the intervals of 1.1-3.3% and 2.7-5.3%. Detection limits obtained with the CE-ICP-MS system were in the range of 0.11-0.19 mg.L(-1) (as compound) yielding an enhancement of 130- to 230-fold with respect to FPD. The proposed methodology was finally applied for the determination of the OPPs mentioned above in natural river water samples.     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.     

A molecular mechanics study of the effect of substitution in position 1 on the conformational space of the oxytocin/vasopressin ring

Summary The effect of the substitution in position 1 on the low-energy conformations of the oxytocin/vasopressin 20-membered ring was investigated by means of molecular mechanics. Three representative substitutions were considered: -mercapto-,-dimethyl)propionic acid (Dmp), (-mercapto-,-cyclopentamethylene)propionic acid (Cpp), both forming strong antagonists, and (,-dimethyl--mercapto)propionic acid (-Dmp), forming analogs of strongly reduced biological activity, with the -mercaptopropionic (Mpa) residue taken as reference. Both ECEPP/2 (rigid valence geometry) and AMBER (flexible valence geometry) force fields were employed in the calculations. Three basic types of backbone conformations were taken into account which are distinguished by the type of -turn at residues 3 and 4: 1/III, II, and I/III, all types containing one or two intra-annular hydrogen bonds. The allowed (ring-closed) disulfide-bridge conformations were searched by an algorithm formulated in terms of scanning the disulfide-bridge torsional angle C-S-S-C. The ECEPP/2 and AMBER energies of the obtained conformations were found to be in reasonable agreement. Two of the low-energy conformers of the [Mpa¹]-compound agreed very well with the cyclic part of the two conformers found in the crystal structure of [Mpa¹]-oxytocin. An analysis of the effect of -substitution on relative energies showed that the conformations with the N-C-CH₂-CH₂ (₁) and C-CH₂-CH₂-S (₁) angles of the first residue around (–100°, 60°) and (100°, –60°) are not affected; this in most cases implies a left-handed disulfide bridge. In the case of -substitution the allowed values of ₁ are close to ± 60°. This requirement, being in contradiction to the one concerning -substitution, could explain the very low biological activity of the -substituted analogs. The conformational preferences of substituted compounds can largely be explained by the analysis of local interactions within the first residue. Based on the selection of the conformations which are low in energy for both the reference and -substituted compounds, two distinct types of possible binding conformations were proposed, the first one being similar to the crystal conformer with a left-handed disulfide bridge, the second one having a right-handed bridge, but a geometry different from that of the crystal conformer with the right-handed bridge. The first type of disulfide-bridge arrangement is equally favorable for both I/III and II types of backbone structure, while the second one is allowed only for the II type of backbone. No conformation of the I/III type has a low enough energy to be considered as a possible binding conformation for all of the active compounds studied in this work.     

Ring-chain-transformations : Synthesis of ω-functionalized alkylthio-1,2,4-triazoles by reaction of cyclic S-analogous N-cyano or N-aroylcarbonimidoesters with hydrazines

Cyclic N-cyanocarbonimidodithioesters 4 or N-aroylcarbonimidothioic acid esters 10 react regioselectively with arylhydrazines and methylhydrazine by a ring chain transformation reaction forming ω-functionalized 3-alkylthio-1,2,4-triazoles 8 and 11 or 5-alkylthio-1,2,4-triazoles 9 .     

Working conditions of a Clark-type sensor with a polyethylene membrane in the presence of vapours of chlorine derivatives of methane

The indications of a Clark-type electrochemical sensor with a polyethylene foil used as a membrane are noticeably changed if vapours of chlorine derivatives of methane (CCl₄, CHCl₃, CH₂Cl₂) are present in the atmosphere examined and the sensor has been calibrated in an atmosphere from which those vapours were absent. The sensitivity of the sensor increases and tends to deviate from linearity. The increase is more profound, when the number of chlorine atoms within a molecule of the vapour increases, the partial pressure of the vapour increases and the temperature of the atmosphere examined decreases. If the vapours affect the membrane for a long time, the response time decreases. If the membrane is freshly subjected to the influence of the vapours, a longer period of time is needed to reach a stable indication corresponding to the partial pressure of oxygen actually observed.     

Synthesis of 3‐(Pyridin‐4‐Ylmethyl)‐4‐Substituted‐1,2,4‐Triazoline‐5‐Thione

The reaction of the hydrazide of pyridine‐4‐acetic acid with isothiocyanate gave thiosemicarbazide derivatives respectively. Further cyclization with 2% NaOH led to the formation of 4‐substituted 3‐(pyridin‐4‐ylmethyl)‐1,2,4‐triazoline‐5‐thione and 3‐(pyridin‐4‐ylmethyl)‐1,2,4‐triazoline‐5‐thione. The structures of all new products were confirmed by analytical and spectroscopic methods.     

Prediction of Retention in Liquid-Solid Chromatography with Ternary Mobile Phases

The method for the prediction of capacity factors in ternary mobile phases is presented. The adsorption mechanism of retention is considered. The simple theoretical equations are proposed for mobile phases for which the ratio of mole fractions of the weaker solvents remains fixed. The relations between parameters characterizing retention in ternary and binary mobile phases are discussed. The theoretical model is verified for numerous solutes and different mobile phases.