Enhanced In situ Activity of Peroxidases and Lignification of Root Tissues after Exposure to Non-Thermal Plasma Increases the Resistance of Pea Seedlings

Improving the germination of economically important crops and the condition of young plants is a major challenge currently facing agricultural practice. Pea (Pisum sativum L.) is one of the four most important cultivated legumes, along with groundnut (Arachis hypogaea L.), soybean (Glycine max L.) and beans (Phaseolus vulgaris L.). Due to the high protein content (23–33%), there is an interest in growing this crop as a source of protein for humans and animals. In this study, we focused on the effect of Cold Atmospheric Pressure Plasma (CAPP) on the decontamination and germination of pea seeds, on young seedling growth and production parameters, and on increasing their resistance and mechanical strength. We can state that germination increased by 10 to 25% after plasma treatment, and the most significant decontamination effect was detected when using non-thermal plasma generated in the ambient air (A-variants) and in the nitrogen atmosphere (N-variants). The increased in situ activity of peroxidases (POX) in the cell walls of A-variants and N-variants is also closely related to the increase in the mechanical strength of the cell walls and thus contributes to the higher resistance of these seedlings. This is also illustrated by the differences in lignin deposition among the different variants after CAPP treatment. To our knowledge, this is the first study concerning the influence of CAPP on the lignification of root tissues and on increasing the strength and resistance of plants.

     

Electronic structures,bonding, and spin state energetics of biomimetic mononuclear and bridged dinuclear iron complexes: a computational examination

Structural Chemistry - Mononuclear and dinuclear iron complexes are found as key intermediates in many synthetic and biocatalytic reactions, since many of these species are transient and have high...     

Detection of traces of oxidized and reduced sulfur compounds in small samples by combination of different high-performance liquid chromatography methods

Depending on the sulfur species, picomoles of different inorganic sulfur compounds can be detected and separated by HPLC in one arrangement in a sample volume less than 50 μl. The combination of fluorescence labelling of reduced inorganic sulfur compounds such as sulfide (S²⁻), sulfite(SO₃²⁻ and thiosulfate (S₂O₃²⁻) with monobromobimane followed by an extraction of elemental sulfur (S°) by chloroform treatment enables the detection of all mentioned sulfur compounds as well as sulfate (remaining aqueous phase) in the same sample. While the derivatized sulfur compounds could be detected by their fluorescence emission at 480 nm, elemental sulfur is identified by its UV absorption at 263 nm. Sulfate in the remaining aqueous phase is detected by HPLC with indirect UV detection at 254 nm. Detection ranges for the different sulfur compounds examined are as follows: sulfide (5 μM to 1.5 mM), sulfite (5 μM to 1.0 mM), thiosulfate (1 μM to 1.5 mM), elemental sulfur (2 μM to 32 mM) and sulfate (5 μM to >1 mM).     

Tale of the Breslow intermediate,a central player in N-heterocyclic carbene organocatalysis: then and now

N-Heterocyclic carbenes (NHCs) belong to the popular family of organocatalysts used in a wide range of reactions, including that for the synthesis of complex natural products and biologically active compounds. In their organocatalytic manifestation, NHCs are known to impart umpolung reactivity to aldehydes and ketones, which are then exploited in the generation of homoenolate, acyl anion, and enolate equivalents suitable for a plethora of reactions such as annulation, benzoin, Stetter, Claisen rearrangement, cycloaddition, and C–C and C–H bond functionalization reactions and so on. A common thread that runs through these NHC catalyzed reactions is the proposed involvement of an enaminol, also known as the Breslow intermediate, formed by the nucleophilic addition of an NHC to a carbonyl group of a suitable electrophile. In the emerging years of NHC catalysis, enaminol remained elusive and was largely considered a putative intermediate owing to the difficulties encountered in its isolation and characterization. However, in the last decade, synergistic efforts utilizing an array of computational and experimental techniques have helped in gaining important insights into the formation and characterization of Breslow intermediates. Computational studies have suggested that a direct 1,2-proton transfer within the initial zwitterionic intermediate, generated by the action of an NHC on the carbonyl carbon, is energetically prohibitive and hence the participation of other species capable of promoting an assisted proton transfer is more likely. The proton transfer assisted by additives (such as acids, bases, other species, or even a solvent) was found to ease the kinetics of formation of Breslow intermediates. These important details on the formation, in situ detection, isolation, and characterization of the Breslow intermediate are scattered over a series of reports spanning well over a decade, and we intend to consolidate them in this review and provide a critical assessment of these developments. Given the central role of the Breslow intermediate in organocatalytic reactions, this treatise is expected to serve as a valuable source of knowledge on the same.

Molecular insights on the formation, detection, and even isolation of the Breslow intermediate, which is the most important species in N-heterocyclic carbene (NHC) catalysis, as obtained from experimental and computational studies, are presented.     

Synthesis and Preliminary Anticancer Activity Assessment of N-Glycosides of 2-Amino-1,3,4-thiadiazoles

The addition of 2-amino-1,3,4-thiadiazole derivatives with parallel iodination of differently protected glycals has been achieved using a double molar excess of molecular iodine under mild conditions. The corresponding thiadiazole derivatives of N-glycosides were obtained in good yields and anomeric selectivity. The usage of iodine as a catalyst makes this method easy, inexpensive, and successfully useable in reactions with sugars. Thiadiazole derivatives were tested in a panel of three tumor cell lines, MCF-7, HCT116, and HeLa. These compounds initiated biological response in investigated tumor models in a different rate. The MCF-7 is resistant to the tested compounds, and the cytometry assay indicated low increase in cell numbers in the sub- G1 phase. The most sensitive are HCT-116 and HeLa cells. The thiadiazole derivatives have a pro-apoptotic effect on HCT-116 cells. In the case of the HeLa cells, an increase in the number of cells in the sub-G1- phase and the induction of apoptosis was observed.     

Controlled Anchoring of (Phenylureido)sulfonamide-Based Receptor Moieties: An Impact of Binding Site Multiplication on Complexation Properties

The repetition of urea-based binding units within the receptor structure does not only lead to monomer properties multiplication. As confirmed by spectroscopic studies, UV-Vis and ¹H-NMR in classical or competitive titration mode, the attachment to a carrier allocates the active moieties to mutual positions predetermining the function of the whole receptor molecule. Bivalent receptors form self-aggregates. Dendritic receptors with low dihydrogen phosphate loadings offer a cooperative complexation mode associated with a positive dendritic effect. In higher dihydrogen phosphate concentrations, the dendritic branches act independently and the binding mode changes to 1:1 anion: complexation site. Despite the anchoring, the dendritic receptors retain the superior efficiency and selectivity of a monomer, paving the way to recyclable receptors, desirable for economic and ecological reasons.     

Fenugreek mucilage as a flocculating agent for sewage treatment

The use of fenugreek mucilage, a natural polysaccharide and a direct food additive, as a flocculating agent for removal of suspended and dissolved solids from sewage effluent has been reported. A flocculation study has been done by the standard jar test method. The percent removal of suspended solid (SS) and dissolved solid (TDS) was determined by varying the polymer dose, pH and contact time. X-ray diffraction patterns of the solid waste material of mucilage and flocs (so obtained after treatment) were used to suggest the incorporation of the crystalline waste material in the mucilage. The optimal mucilage concentration was found to be 0.16 mg/l. The suitable pH range for maximum solid removal (SS and TDS) was alkaline and the time required for treatment was 1-3 h.     

Non-isothermal degradation kinetics of PLA-functionalized gum (fG) biocomposite with dicumyl peroxide (DCP)

Journal of Thermal Analysis and Calorimetry - In the present investigation, gene expression programming (GEP) is used to predict thermal conductivity of nanofluids consisting of $$hbox {Al}_2hbox...     

CyClick Chemistry for the Synthesis of Cyclic Peptides

Here, we report a novel “CyClick” strategy for the macrocyclization of peptides that works in an exclusively intramolecular fashion thereby precluding the formation of dimers and oligomers via intermolecular reactions. The CyClick chemistry is highly chemoselective for the N‐terminus of the peptide with a C‐terminal aldehyde. In this protocol, the peptide conformation internally directs activation of the backbone amide bond and thereby facilitates formation of a stable 4‐imidazolidinone‐fused cyclic peptide with high diastereoselectivity (>99 %). This method is tolerant to a variety of peptide aldehydes and has been applied for the synthesis of 12‐ to 23‐membered rings with varying amino acid compositions in one pot under mild reaction conditions. The reaction generated peptide macrocycles featuring a 4‐imidazolidinone in their scaffolds, which acts as an endocyclic control element that promotes intramolecular hydrogen bonding and leads to macrocycles with conformationally rigid turn structures.     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.