Observations on clear solution silicalite-1 growth by nanoslabs

Several research groups have reported the presence of nanometer-sized particles (nanoslabs) in clear solutions, which precipitate the crystalline MFI (ZSM-5) structure. Debate about the growth mechanism for Al-free ZSM-5 (silicalite-1) has revolved around growth by small silicate units (monomers, dimers, etc.) from solution vs growth by nanoslab addition. A model developed for precipitation of uniform sized colloids by addition of sub-colloidal precursor units has been adapted for this zeolite synthesis system. Parameter values were adjusted for the simulation results to match experimental observations from work reported previously, at least to the extent possible. The model involved the simultaneous solution of up to 6000 ordinary differential equations, and required computation times of up to 24 h. The results shed light on the crystal growth mechanism, but pose questions for further investigations of the nucleation mechanism.     

Effect of bending and torsion rigidity on self-diffusion in polymer melts: a molecular-dynamics study

Extensive molecular-dynamics simulations have been performed to study the effect of chain conformational rigidity, controlled by bending and torsion potentials, on self-diffusion in polymer melts. The polymer model employs a novel torsion potential that avoids computational singularities without the need to impose rigid constraints on the bending angles. Two power laws are traditionally used to characterize the dependence of the self-diffusion coefficient on polymer length: D proportional to N(-nu) with nu=1 for NNe (reptation regime), Ne being the entanglement length. Our simulations, at constant temperature and density, up to N=250 reveal that, as the chain rigidity increases, the exponent nu gradually increases towards nu=2.0 for NNe. The value of Ne is slightly increased from 70 for flexible chains, up to the point where the crossover becomes undefined. This behavior is confirmed also by an analysis of the bead mean-square displacement. Subsequent investigations of the Rouse modes, dynamical structure factor, and chain trajectories indicate that the pre-reptation regime, for short stiff chains, is a modified Rouse regime rather than reptation.     

Synthese monodisperser linearer und cyclischer Oligomere der (R)-3-Hydroxybuttersäure mit bis zu 128 Einheiten

Monodisperse Linear and Cyclic Oligo[(R)-3-hydroxybutanoates] Containing up to 128 Monomeric Units Using benzyl ester/(tert-butyl)diphenylsilyl ether protection, (COCl)₂/pyridine esterification conditions, and a fragment-coupling strategy (with H₂/Pd-C debenzylation and HF · pyridine desilylation), linear oligomers of (R)-3-hydroxybutanoic acid (3-HB) containing up to 128 3-HB building blocks (mol. weight > 11 000 Da) are assembled (Schemes 1,2,5, and 6). In contrast to the previously employed protecting-group combination, and due to the low-temperature esterifying conditions, this procedure leads to monodisperse oligomers: all steps occur without loss of single 3-HB units. The product oligomers with two, one, and no terminal protecting groups (mostly prepared in multi-gram amounts) are characterized by all standard spectroscopic methods, especially by mass spectroscopy (Figs. 2 and 3), by their optical activity, and by elemental analyses. Cyclization of the oligo[(R)-3-hydroxybutanoic acids] with up to 32 3-HB units, using thiopyridine activation and CuBr₂ for the ring closure, produces oligolides consisting of up to 128 ring atoms (Scheme 7). Mixed oligolides containing 3-HB and (R)-3-hydroxypentanoic units are prepared from the corresponding linear trimers, using Yamaguchi's method for the ring closure (Scheme 8 and Fig.4 (X-ray crystal structures of two folded conformers)). Comparisons of melting points (Table 1), of [α] values (Tables 2 and 3), of ¹H-NMR coupling constants (Table 3), and of molecular volume/hydroxyalkanoate unit (Table 4) of linear and cyclic oligomer derivatives and of the high-molecular-weigh polymer show that the monodisperse oligomers appear to be surprisingly good models for the polymer. Besides this insight, our synthesis is supplying the samples to further test the role of P(3-HB) (ca. 140 units) as a component of complexes forming channels through cell-wall phospholipid bilayers.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.     

An Improved HPLC Post-Column Methodology for the Identification of Free Radical Scavenging Phytochemicals in Complex Mixtures

The importance of natural antioxidants principally relates to their health-promoting properties. The discovery of new sources of established compounds or more potent compounds is a costly exercise and any technique capable of aiding this procedure would be highly significant. An approach combining chromatographic separation, component analysis and post-column identification of free radical scavenging has been reported. However, its effectiveness is dependent upon various factors and the number of samples analyzed without operator intervention is restricted. A more applicable technique using a 10% to 100% methanol with 2% acetic acid mobile phase and a citric acid-sodium citrate buffered methanolic 1,1-diphenyl-2-picrylhydrazyl free radical reagent is presented, whereby free radical scavengers can be detected within crude extracts of variable polarity without special considerations. As an illustration, acetone, 70% (aq.) methanol and acetonitrile-soluble extracts were prepared from sage (Salvia officinalis L.) for extraction of polar and non-polar radical scavengers and analyzed. Radical scavenging components were identified as carnosic, caffeic and rosmarinic acids and luteolin-7-O-glycoside. Others radical scavengers were tentatively identified as benzoic and hydroxycinnamic acid derivatives, flavonoids and diterpenoids. Through the application of this technique, carnosic acid and rosmarinic acid were identified as the principal free radical scavengers.     

A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.     

Structural characterisation of tyrosine-nitrated peptides by ultraviolet and infrared matrix-assisted laser desorption/ionisation Fourier transform ion cyclotron resonance mass spectrometry

Nitration of tyrosine residues in proteins may occur in cells upon oxidative stress and inflammation processes mediated through generation of reactive nitroxyl from peroxynitrite. Tyrosine nitration from oxidative pathways may generate cytotoxic species that cause protein dysfunction and pathogenesis. A number of protein nitrations in vivo have been reported and some specific Tyrosine nitration sites have been recently identified using mass spectrometric methods. High-resolution Fourier transform ion cyclotron resonance mass spectrometry (MALDI) FT-ICR-MS) is shown here to be a highly efficient method in the determination of protein nitrations. Following the identification of nitration of the catalytic site Tyr-430 residue of bovine prostacyclin synthase, we synthesised several model peptides containing both unmodified tyrosine and 3-nitro-tyrosine residues, using solid-phase peptide synthesis (SPPS). The structures of the nitrotyrosine peptides were characterised both by ESI- and by matrix-assisted laser desorption/ionisation (MALDI)-FT-ICR-MS, using a standard ultraviolet (UV) nitrogen nitrogen laser and a 2.97 microm Nd-YAG infrared laser. Using UV-MALDI-MS, 3-nitrotyrosyl-peptides were found to undergo extensive photochemical fragmentation at the nitrophenyl group, which may hamper or prevent the unequivocal identification of Tyr-nitrations in cellular proteins. In contrast, infrared-MALDI-FT-ICR-MS did not produce fragmentation of molecular ions of Tyr-nitrated peptides.     

Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.