Multi-functional coating of cellulose nanocrystals for flexible packaging applications

In this paper, we systematically address the performance of cellulose nanocrystals (CNs) coated flexible food packaging films. Firstly, the morphology of CNs from cotton linters and homogeneity of its coating on different substrates were characterized by transmission electronic microscopy and atomic force microscopy. Then, the 1.5 μm thick CNs coating on polyethylene terephthalate (PET), oriented polypropylene, oriented polyamide (OPA), and cellophane films were characterized for their mechanical, optical, anti-fog, and barrier properties. CNs coating reduces the coefficient of friction while maintaining high transparency (~90 %) and low haze (3–4 %) values, and shows excellent anti-fog properties and remarkable oxygen barrier (oxygen permeability coefficient of CNs coating, P’O₂, 0.003 cm³ μm m^?2 24 h^?1 kPa^?1). In addition, the Gelbo flex test combined with oxygen permeance (PO₂) measurements and optical microscopy are firstly reported for evaluating the durability of coatings, revealing that the CNs coated PET and OPA provide the best performance among the investigated coated films. CNs are therefore considered to be a promising multi-functional coating for flexible food packaging.     

Chemical composition and bioactivity of Citrus medica L. cv. Diamante essential oil obtained by hydrodistillation, cold-pressing and supercritical carbon dioxide extraction

The chemical composition of the essential oil of Citrus medica L. cv. Diamante peel obtained by hydrodistillation, cold-pressing and supercritical carbon dioxide extraction techniques was determined by GC/MS analysis. Forty-six components were fully characterised. Limonene and γ-terpinene were the major components of the oils obtained by hydrodistillation (HD) and cold-pressing (CP), while citropten was the major constituent in the oil obtained by supercritical carbon dioxide extraction (SFE). Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activities were evaluated. The essential oil obtained by hydrodistillation exerted the highest inhibitory activity against BChE (IC?? value of 154.6 μg mL?1) and AChE (IC?? value of 171.3 μg mL?1. Interestingly, the oil obtained by cold-pressing exhibited a selective inhibitory activity against AChE. The essential oils have also been evaluated for the inhibition of NO production in LPS induced RAW 264.7 macrophages. The oil obtained by hydrodistillation exerted a significant inhibition of NO production with an IC?? value of 17 μg mL?1 (IC?? of positive control 53 μg mL?1).     

Ab initio study of the tautomeric forms of some quinolinediones

7,8-dihydroquinoline-4,5 (1H,6H)-dione (1) and 7,8-dihydroquinoline-2,5-(1H,6H)-dione (2) in their tautomeric oxo and hydroxy forms have been studied by ab initio Hartree-Fock calculations; tautomerization energies predict a more stable hydroxy structure having an intramolecular hydrogen bond for compound 1, whereas the oxo form is slightly-preferred for compound 2. Fourier Transform-Infra Red (FT-IR) spectra in CHCl₃ solution indicate that the predicted most stable tautomers in the vapour phase remain as such.     

Supramolecular architectures of streptavidin on biotinylated self-assembled monolayers. Tracking biomolecular reorganization after bioconjugation

In this work we have studied the supramolecular bioconjugation of streptavidin (SAv) on biotinylated self-assembled monolayers. By using the quartz crystal microbalance technique with dissipation we were able to follow in real time the biomolecular reorganization within the film. The overall process could be described as an early stage involving a significant increase in surface coverage followed by another stage where the SAv layer slowly reached the asymptotic coverage. Finally, a reorganization process takes place in the bioconjugated film. These results on the kinetics of biomolecular reorganization can be described in terms of the Lifshitz-Slyozov law. These are the first experimental results demonstrating the complexity and the different time scales involved on the bioconjugation of SAv at solid-liquid interfaces. We consider that these findings could have strong implications on the molecular design of biosensing platforms.     

Structural deformation monitored by vibrational properties and orbital modeling in (Pb,Sm)TiO3 systems

Pb_1−xSm_xTiO₃ (PST) powders with x varying from 0 to 0.1 were obtained by the polymeric precursor method, a soft chemical route. The vibrational properties relating tetragonal to pseudo-cubic phase transition were studied by Raman spectroscopy. The results obtained showed that the phase transition is extremely dependent upon the samarium content and presents a diffuse behavior. Monitoring of the oxygen 2p and titanium 3d orbitals was performed by the periodic mechanical quantum method, revealing the changes that occur with the distribution and contribution of the hybrid orbitals due to the samarium influence.     

First direct observation of the decay of neutral charmed particles produced by neutrinos in emulsion

Three examples of the production in emulsion by neutrinos and subsequent decay of neutral short-lived particles are reported. The flight times are ≈ 10^?13s, similar in order of magnitude to those previously determined for charged charmed particles in the same experiment.     

3-methylthiophene self-assembled monolayers on planar and nanoparticle Au surfaces

In this article the adsorption of 3-methylthiophene on planar and nanoparticle Au surfaces is investigated. The resulting systems are compared with a benchmark system based on 1-decanethiol. The characterization data collected evidence the formation of a packed 3-methylthiophene SAM on the planar surface. In particular, spectroscopic investigations suggest that 3-methylthiophene aromatic system is not adsorbed on the surface through the pi-electron system but rather through the S atom alone. On the other hand, the behavior of 3-methylthiophene on nanoparticle surfaces is notably different from that of the alkanethiol. Only a limited fraction of the surface of Au nanoparticles results to be actually coated after purification; this notwithstanding, the nanoparticle growth seems to be strongly influenced by the presence of such a labile encapsulating agent.     

Strong oscillations in molecular valence photoemission intensities

Photoemission from the two outermost ionizations [highest occupied molecular orbitals (HOMO and HOMO-1)] of Mg(eta(5)-C(5)H(5))(2) has been studied with synchrotron radiation in the gas phase. Strong oscillations in the HOMO-1/HOMO ratio, qualitatively similar to those well-known for fullerenes, are found. Excellent agreement with the experimental ratio is provided by accurate cross section calculations both at the density-functional theory and time-dependent density-functional theory level, indicating that a many electron response has a minor role for this effect. A comparison with the calculated values for other metal sandwich compounds indicate that the presence of oscillations is a widespread phenomenon, and a potential source of interesting information on the structural and electronic properties of the target molecule.     

Cu-catalyzed asymmetric allylic alkylations of aromatic and aliphatic phosphates with alkylzinc reagents. An effective method for enantioselective synthesis of tertiary and quaternary carbons

Efficient enantioselective Cu-catalyzed allylic alkylations of aromatic and aliphatic allylic phosphates bearing di- and trisubstituted olefins are disclosed. Enantioselective C-C bond forming reactions are promoted in the presence of 10 mol % readily available chiral amino acid-based ligand (5 steps, 40% overall yield synthesis) and 5 mol % (CuOTf)2 x C6H6. Reactions deliver tertiary and quaternary stereogenic carbon centers regioselectively and in 78-96% ee. Data regarding the effect of variations in ligand structure on the efficiency and enantioselectivity of the alkylation process, as well as a mechanistic working model, are presented. The suggested model involves a dual role for the chiral Cu complex: association of the Cu(I) center to the olefin is facilitated by a two-point binding between the carbonyl of the ligand's amide terminus and the P=O of the substrate.