Can human prolidase enzyme use different metals for full catalytic activity?

The catalytic hydrolysis of the Gly-Pro substrate by the bimetallic prolidase active site model cluster has been investigated at the DF/B3LYP level of theory, in order to provide fundamental insights into the still poorly understood mechanism of prolidase catalysis. To date, the majority of prolidases exhibits metal-dependent activity, requiring two divalent cations such as Zn(2+), Mn(2+), or Co(2+) for maximal activity. In addition, it has been shown recently that two different metal ions in the active site of human prolidase (Zn and Mn) can coexist, with the protein remaining partially active. With the purpose of identifying which is the most efficient dimetallic center for the prolidase catalyzed reaction, Zn(II), Co(II), and Mn(II) have been examined as potential catalytic metals for this enzyme. Furthermore, to better elucidate the exact roles played by the metals occupying the site 1 and site 2 positions, the hetero-bimetallic active site having Zn and Mn cations has been also investigated, considering the two derivatives Mn1-Zn2 and Zn1-Mn2. The rate-determining step of the hydrolysis reaction is always found to be the nucleophilic addition of the hydroxide ion on the carbonyl carbon of the scissile peptide bond, followed by the less energetically demanding proline-peptide C-N bond scission. The analysis of the involved energy barriers does not indicate clearly a preference for a particular metal by the prolidase enzyme. Instead, we may point out a slightly better behavior of the cobalt-containing cluster as far as both tetrahedral formation and its decomposition are concerned, due to a greater degree of ligands-to-metals charge transfer. The mixed Mn-Zn hetero-dimetallic clusters appear to be also able to perform the hydrolysis of the Pro-Gly substrate, with a slight preference for the Mn1-Zn2 configuration.     

Quantitative impact of small angle forward scatter on whole blood oximetry using a Beer-Lambert absorbance model

It is well known that red blood cell scattering has an impact on whole blood oximetry as well as in vivo retinal oxygen saturation measurements. The goal of this study was to quantify the impact of small angle forward scatter on whole blood oximetry for scattering angles found in retinal oximetry light paths. Transmittance spectra of whole blood were measured in two different experimental setups: one that included small angle scatter in the transmitted signal and one that measured the transmitted signal only, at absorbance path lengths of 25, 50, 100, 250 and 500 μm. Oxygen saturation was determined by multiple linear regression in the 520-600 nm wavelength range and compared between path lengths and experimental setups. Mean calculated oxygen saturation differences between setups were greater than 10% at every absorbance path length. The deviations to the Beer-Lambert absorbance model had different spectral dependences between experimental setups, with the highest deviations found in the 520-540 nm range when scatter was added to the transmitted signal. These results are consistent with other models of forward scatter that predict different spectral dependences of the red blood cell scattering cross-section and haemoglobin extinction coefficients in this wavelength range.     

Intercompany Study to Evaluate the Robustness of Capillary Isoelectric Focusing Technology for the Analysis of Monoclonal Antibodies

Interlaboratory comparisons are essential to bringing emerging technologies into biopharmaceutical industry practice and regulatory acceptance. As a result, an international team including 12 laboratories from 10 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of capillary isoelectric focusing (CIEF) to assess the charge heterogeneity of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charge isoforms of a representative monoclonal antibody (rMAb) sample using the same CIEF method. Statistical evaluation of the data was performed to determine within and between-laboratory consistencies and outlying information. The apparent pI data generated for each charge variant peak showed very good precision between laboratories with percentage of RSD values of ??0.5%. Similarly, the percentage of RSD for the rMAb charge variants percent peak area values are ??4.4% across different laboratories with different analysts using different lots of ampholytes and multiple instruments. Taken together, these results validate the appropriate use of CIEF in the biopharmaceutical industry in support of regulatory submissions.     

Chemical composition and bioactivity of Citrus medica L. cv. Diamante essential oil obtained by hydrodistillation, cold-pressing and supercritical carbon dioxide extraction

The chemical composition of the essential oil of Citrus medica L. cv. Diamante peel obtained by hydrodistillation, cold-pressing and supercritical carbon dioxide extraction techniques was determined by GC/MS analysis. Forty-six components were fully characterised. Limonene and γ-terpinene were the major components of the oils obtained by hydrodistillation (HD) and cold-pressing (CP), while citropten was the major constituent in the oil obtained by supercritical carbon dioxide extraction (SFE). Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activities were evaluated. The essential oil obtained by hydrodistillation exerted the highest inhibitory activity against BChE (IC?? value of 154.6 μg mL?1) and AChE (IC?? value of 171.3 μg mL?1. Interestingly, the oil obtained by cold-pressing exhibited a selective inhibitory activity against AChE. The essential oils have also been evaluated for the inhibition of NO production in LPS induced RAW 264.7 macrophages. The oil obtained by hydrodistillation exerted a significant inhibition of NO production with an IC?? value of 17 μg mL?1 (IC?? of positive control 53 μg mL?1).     

Impact of electrodialytic parameters on cation migration kinetics and fouling nature of ion-exchange membranes during treatment of solutions with different magnesium/calcium ratios

During electrodialysis (ED) treatment of solutions with different Mg/Ca ratios (R = 0, 1/20, 1/10, 1/5 and 2/5) and in different pH conditions (acid, neutral and basic), foulings on ion-exchange membranes were previously characterized and identified, by the way of X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses. A mineral fouling was observed in neutral and basic conditions (for R = 1/5 and 2/5) on the anion-exchange membrane (AEM) concentrate side and in basic conditions on the cation-exchange membrane (CEM) concentrate side as well as on the diluate side for R = 1/5 and 2/5. The objectives of this present work were to link the morphological characterization and identification of membrane fouling to electrodialytic parameters and cation migration kinetics. It appeared that the CEM permselectivity was severely affected in basic conditions for R ≥ 1/5. The consequence of this alteration was the migration of OH⁻ through the CEM, a pH increase in the diluate compartment and different treatment durations. The calcite observed on AEM concentrate side for Mg/Ca ≥ 1/5 would be due first to the particular operating conditions such as the recirculation of the concentrate solution, and also to the supersaturated conditions reached or not at the AEM interface and favourable pH conditions.     

Gas chromatographic quantitative analysis of methanol in wine: operative conditions, optimization and calibration model choice

The influence of the wine distillation process on methanol content has been determined by quantitative analysis using gas chromatographic flame ionization (GC-FID) detection. A comparative study between direct injection of diluted wine and injection of distilled wine was performed. The distillation process does not affect methanol quantification in wines in proportions higher than 10%. While quantification performed on distilled samples gives more reliable results, a screening method for wine injection after a 1:5 water dilution could be employed. The proposed technique was found to be a compromise between the time consuming distillation process and direct wine injection. In the studied calibration range, the stability of the volatile compounds in the reference solution is concentration-dependent. The stability is higher in the less concentrated reference solution. To shorten the operation time, a stronger temperature ramp and carrier flow rate was employed. With these conditions, helium consumption and column thermal stress were increased. However, detection limits, calibration limits, and analytical method performances are not affected substantially by changing from normal to forced GC conditions. Statistical data evaluation were made using both ordinary (OLS) and bivariate least squares (BLS) calibration models. Further confirmation was obtained that limit of detection (LOD) values, calculated according to the 3sigma approach, are lower than the respective Hubaux-Vos (H-V) calculation method. H-V LOD depends upon background noise, calibration parameters and the number of reference standard solutions employed in producing the calibration curve. These remarks are confirmed by both calibration models used.     

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain‐end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.     

Lactose as a “Trojan Horse” for Quantum Dot Cell Transport

A series of glycan‐coated quantum dots were prepared to probe the effect of glycan presentation in intracellular localization in HeLa and SV40 epithelial cells. We show that glycan density mostly impacts on cell toxicity, whereas glycan type affects the cell uptake and intracellular localization. Moreover, we show that lactose can act as a “Trojan horse” on bi‐functionalized QDs to help intracellular delivery of other non‐internalizable glycan moieties and largely avoid the endosomal/lysosomal degradative pathway.