Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Multi-functional coating of cellulose nanocrystals for flexible packaging applications

In this paper, we systematically address the performance of cellulose nanocrystals (CNs) coated flexible food packaging films. Firstly, the morphology of CNs from cotton linters and homogeneity of its coating on different substrates were characterized by transmission electronic microscopy and atomic force microscopy. Then, the 1.5 μm thick CNs coating on polyethylene terephthalate (PET), oriented polypropylene, oriented polyamide (OPA), and cellophane films were characterized for their mechanical, optical, anti-fog, and barrier properties. CNs coating reduces the coefficient of friction while maintaining high transparency (~90 %) and low haze (3–4 %) values, and shows excellent anti-fog properties and remarkable oxygen barrier (oxygen permeability coefficient of CNs coating, P’O₂, 0.003 cm³ μm m^?2 24 h^?1 kPa^?1). In addition, the Gelbo flex test combined with oxygen permeance (PO₂) measurements and optical microscopy are firstly reported for evaluating the durability of coatings, revealing that the CNs coated PET and OPA provide the best performance among the investigated coated films. CNs are therefore considered to be a promising multi-functional coating for flexible food packaging.     

Determination of Required HLB of Capryol 90

The required hydrophilic-lipophilic balance (HLB) of an oily substance indicates the HLB of the surfactants required to prepare a stable emulsion using the oil. This study utilizes empirical method to calculate required HLB (RHLB) of Capryol 90 using surfactant blends (Span 20, Tween 20, vitamin E TPGS, Pluronic F68, Span 60, and Tween 80). The methods used were assessment of degree of creaming after centrifugation and after shelf storage for 28 days at room temperature, turbidimetric method, accelerated stability study, and droplet size analysis. The droplet size was found to be in the range of 15 to 2 µm and v/v% separation after centrifugation was found to be 0–82%. The RHLB for Capryol 90 was found to be 15. The effect of various surfactant blends was investigated. Results revealed that a blend of tocopherol polyethylene glycol succinate (TPGS) and Pluronic F68 gave the most stable emulsion for Capryol 90.     

An In Vitro Pilot Fermentation Study on the Impact of Chlorella pyrenoidosa on Gut Microbiome Composition and Metabolites in Healthy and Coeliac Subjects

The response of a coeliac and a healthy gut microbiota to the green algae Chlorella pyrenoidosa was evaluated using an in vitro continuous, pH controlled, gut model system, which simulated the human colon. The effect of C. pyrenoidosa on the microbial structure was determined by 16S rRNA gene sequencing and inferred metagenomics, whereas the metabolic activitywas determined by¹H-nuclear magnetic resonancespectroscopic analysis. The addition of C. pyrenoidosa significantly increased the abundance of the genera Prevotella, Ruminococcus and Faecalibacterium in the healthy donor, while an increase in Faecalibacterium, Bifidobacterium and Megasphaera and a decrease in Enterobacteriaceae were observed in the coeliac donor. C. pyrenoidosa also altered several microbial pathways including those involved in short-chain fatty acid (SCFA) production. At the metabolic level, a significant increase from baseline was seen in butyrate and propionate (p < 0.0001) in the healthy donor, especially in vessels 2 and 3. While acetate was significantly higher in the healthy donor at baseline in vessel 3 (p < 0.001) compared to the coeliac donor, this was markedly decreased after in vitro fermentation with C. pyrenoidosa. This is the first in vitro fermentation study of C. pyrenoidosa and human gut microbiota, however, further in vivo studies are needed to prove its efficacy.     

Intra- and Inter-molecular Sulf- hydryl Hydrogen Bonding: Facilitating Proton Transfer Events for Determination of pH in Sea Water

This work presents the electrochemical response of a 2-(methylthio)phenol glassy carbon based electrode for a promising voltammetric pH sensor in both buffered and low-buffered solutions. Electropolymerization of the redox species was performed with the resulting polymer presenting a Nernstian response in buffered media, with a sensitivity of 51 mV/pH unit. The effectiveness of the sulfhydryl bond to facilitate proton transfer from the bulk solution to the phenol molecules has been confirmed, providing an accurate pH measurement of 8.28 in sea water media, compared to that measured with a calibrated glass pH probe of 8.30.     

Lactose as a “Trojan Horse” for Quantum Dot Cell Transport

A series of glycan‐coated quantum dots were prepared to probe the effect of glycan presentation in intracellular localization in HeLa and SV40 epithelial cells. We show that glycan density mostly impacts on cell toxicity, whereas glycan type affects the cell uptake and intracellular localization. Moreover, we show that lactose can act as a “Trojan horse” on bi‐functionalized QDs to help intracellular delivery of other non‐internalizable glycan moieties and largely avoid the endosomal/lysosomal degradative pathway.     

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain‐end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.     

Electron (charge) density studies of cellulose models

Introductory material first describes electron density approaches and demonstrates visualization of electron lone pairs and bonding as concentrations of electron density. Then it focuses on the application of Bader’s Quantum Theory of Atoms-in-Molecules (AIM) to cellulose models. The purpose of the work is to identify the various interactions that stabilize cellulose structure. AIM analysis aids study of non-covalent interactions, especially those for which geometric criteria are not well established. The models were in the form of pairs of cellotriose molecules, methylated at the O1 and O4 ends. Based on the unit cell of cellulose Iβ, there were corner–corner, and center–center pairs that correspond to (200) sheets, and corner–center pairings that corresponded to (1–10) and (110) stacks. AIM analysis (or charge-density topology analysis) was applied before and after minimization in vacuum and in continuum solvation. Besides the conventional O–H···O hydrogen bonds, all of which were known from geometric criteria, C–H···O hydrogen bonds (some previously reported), and some O···O and H···H interactions were found. Non-covalent bonds in the (200) sheets were maintained in all calculations with the exception of a weak, bifurcated O6–H···O2′′ bond that was not found in the corner–corner pair model and did not survive minimization. Nor did the O6···O4 interactions on the reducing ends of the triosides. Pairs of molecules along the (110) plane had an equal number (12) of non-covalent bonds compared to the pairs along the (1–10) plane, but the AIM parameters indicated the bonds between the pairs in the (110) plane were weaker. Intra-molecular O–H···O hydrogen bonds survived in these minimized pairs, but the relative chain alignments usually did not.