Synthese monodisperser linearer und cyclischer Oligomere der (R)-3-Hydroxybuttersäure mit bis zu 128 Einheiten

Monodisperse Linear and Cyclic Oligo[(R)-3-hydroxybutanoates] Containing up to 128 Monomeric Units Using benzyl ester/(tert-butyl)diphenylsilyl ether protection, (COCl)₂/pyridine esterification conditions, and a fragment-coupling strategy (with H₂/Pd-C debenzylation and HF · pyridine desilylation), linear oligomers of (R)-3-hydroxybutanoic acid (3-HB) containing up to 128 3-HB building blocks (mol. weight > 11 000 Da) are assembled (Schemes 1,2,5, and 6). In contrast to the previously employed protecting-group combination, and due to the low-temperature esterifying conditions, this procedure leads to monodisperse oligomers: all steps occur without loss of single 3-HB units. The product oligomers with two, one, and no terminal protecting groups (mostly prepared in multi-gram amounts) are characterized by all standard spectroscopic methods, especially by mass spectroscopy (Figs. 2 and 3), by their optical activity, and by elemental analyses. Cyclization of the oligo[(R)-3-hydroxybutanoic acids] with up to 32 3-HB units, using thiopyridine activation and CuBr₂ for the ring closure, produces oligolides consisting of up to 128 ring atoms (Scheme 7). Mixed oligolides containing 3-HB and (R)-3-hydroxypentanoic units are prepared from the corresponding linear trimers, using Yamaguchi's method for the ring closure (Scheme 8 and Fig.4 (X-ray crystal structures of two folded conformers)). Comparisons of melting points (Table 1), of [α] values (Tables 2 and 3), of ¹H-NMR coupling constants (Table 3), and of molecular volume/hydroxyalkanoate unit (Table 4) of linear and cyclic oligomer derivatives and of the high-molecular-weigh polymer show that the monodisperse oligomers appear to be surprisingly good models for the polymer. Besides this insight, our synthesis is supplying the samples to further test the role of P(3-HB) (ca. 140 units) as a component of complexes forming channels through cell-wall phospholipid bilayers.     

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.     

Evidence for a two-step mechanism in electronically selective single-walled carbon nanotube reactions

Covalent and noncovalent chemistries that are selective to single-walled carbon nanotubes of a particular electronic type have become increasingly important for electronic structure separation and on-chip modification of nanoelectronic devices. By monitoring transient Raman spectroscopy and photoluminescence (PL) during a reaction with 4-chlorobenzene diazonium in aqueous solution, evidence for a characteristic two-step mechanism with two distinct time constants is uncovered. A long-lived intermediate selectively and noncovalently binds and partially dopes the nanotube surface (tau = 2.4 min). A slower, covalent reaction is tracked using the time-dependent increase in the disorder mode in Raman (tau = 73 min). The transient Raman and PL data are well described using a series of two first-order reactions. The covalent bonding step can be deactivated by changing the structure of the surfactant adsorbed phase, further supporting the mechanism.     

Preparation and self-assembly of chiral porphyrin diads on the gold electrodes of quartz crystal microbalances: a novel potential approach to the development of enantioselective chemical sensors

Porphyrin diad 1 was synthesized by reaction of the acyl chloride of porphyrin 2 and trans-1,2-dithiane-4,5-diol. The Co complex of this diad was studied as a potential enantioselective receptor for chiral recognition in solution and in the solid state. In solution both enantiomers of limonene induce significant changes in the visible and circular dichroism (CD) spectra of [Co2(1)], while a different behavior is observed in the case of the enantiomeric pair of trans-1,2-diaminocyclohexane. A different efficiency of [Co2(1)] chiral recognition is obtained for these compounds, with a remarkable degree of enantiodiscrimination observed in the case of limonene. Self-assembled monolayers of [Co2(1)] were deposited onto the gold electrodes of quartz crystal microbalances to be used as sensing materials of nanogravimetric sensors operating in the gas phase. The enantiodiscrimination properties of these sensors towards the enantiomeric pairs of chiral analytes have been studied. While in the case of analytes bearing donor ligand atoms we did not observe a remarkable enantioselectivity, a significant degree of chiral discrimination was observed in the case of limonene; this result is particularly encouraging for the potential development of enantioselective chemical sensors for use in an array configuration.     

Profile analysis of organic volatiles in urine of tobacco smoke-exposed beagles

Volatile organic components were determined in the urine of beagle dogs exposed to cigarette smoke and sham in an effort to identify possible biochemical changes resulting from the exposures. The data obtained from high-resolution chromatograms were subjected to principal component and discriminant analysis. Principal component analysis was used to reduce the dimensionality of the data and discriminant analysis was used to develop a classification model. Classification of the profiles into their respective exposure groups based on quantitative variations was 92% correct using only five peaks in the chromatograms. Compounds present in the urine of smoke-exposed dogs were identified by mass spectrometry.     

Synthesis and evaluation of stereopure α-trifluoromethyl-malic hydroxamates as inhibitors of matrix metalloproteinases

The total synthesis of trifluoromethyl (Tfm) analogs of known nanomolar matrix metalloproteinases (MMPs) inhibitors has been performed. The synthetic protocol is based on a moderately stereoselective aldol reaction of trifluoropyruvate with an N-acyl-oxazolidin-2-thione for the construction of the core α-Tfm-malic unit. Both the diastereomeric forms of the target α-Tfm-malic hydroxamates showed micromolar inhibitory potency toward MMP-2 and 9, with a substantial drop with respect to the parent unfluorinated compounds.     

Fluorogenic reaction between adenine derivatives and chloroacetaldehyde and its application to the determination of 9-(2-chloro-6-fluorobenzyl)adenine in human plasma

A sensitive (1 ng ml^?1) liquid chromatographic method with fluorescence detection is described for the determination of arprinocid and analogous compounds in human plasma. The method is based on chemical derivatization with chloroacetaldehyde to form highly fluorescent derivatives. Extraction of the drug from plasma and separation of the derivative from the reaction mixture are accomplished by solid-phase extraction with two silica cartridges. The effects of pH, solvent, and concentration of the reagents on the efficiency of derivatization were studied. The assay in plasma was validated in the 1–50 ng ml^?1 range. The fluorescent derivatives were synthesized and fully characterized. The derivatives were also found to be efficient as energy acceptors in the oxalate ester/hydrogen peroxide chemiluminescent system.     

Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Polychloroprene rubbers used for adhesives: a small angle X-ray scattering preliminary investigation under stretching

Summary Three types of polychloroprene rubbers (Du Pont de Nemours Co. Neoprenes AD, WHV and W) used for adhesives and having different crystallization rates have been investigated.The mechanical properties of the Neoprenes samples were determined and the films were examined under stretching by SAXS for a preliminary investigation on their different superreticular order.

---

Zusammenfassung Drei Typen von Polychloropren-Kautschuk mit verschiedener Kristallisationsgeschwindigkeit (Neoprene AD, WHV und W von Du Pont de Nemours), die als Klebemittel dienen, wurden als gedehnte Filme mechanisch und röntgenographisch (SAXS) untersucht. Sie zeigen Unterschiede in der Überstruktur.