Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization

The functionalization of nanoparticle surfaces is required to improve the dispersion of an inorganic material inside an organic matrix. In this work, polystyrene (PS) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. After polymerization, the magnetic nanoparticles had a graft density of 0.9 PS chains/nm². A sacrificial initiator was used to obtain a satisfactory result for the control of the polymerization, as its addition had to generate a sufficient concentration of persistent radicals (deactivator). A variety of techniques, such as Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, water contact‐angle measurements, and atomic force microscopy, were used to characterize the nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4744–4750, 2007     

Viscum album aqueous extract induces NOS-2 and NOS-3 overexpression in Guinea pig hearts

Viscum album L. aqueous extract, on the Langendorff isolated and perfused heart model, decreases coronary vascular resistance, when compared to control group (36.00 +/- 2.00 vs. 15.80 +/- 1.96 dyn s cm-5). Our data support the fact that this mechanism involves NOS-2 and NOS-3 overexpression (4.65 and 7.89 times over control, respectively), which is correlated with increases in NO (6.24 +/- 2.49 vs. 147.95 +/- 2.79 pmol) and cGMP production (43.94 +/- 2.00 vs. 74.81 +/- 1.96 pmol mg-1 of tissue), compared to control values. Such an effect is antagonized by gadolinium(III) chloride, L-NAME and ODQ. Therefore, coronary vasodilator effect elicited by V. album L. aqueous extract is mediated by the NO/sGC pathway.     

Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B

Novel fluorescent materials were satisfactorily synthesized. With this aim, an epoxy resin based on diglycidyl ether of bisphenol A (DGEBA) was reacted with a laser dye, rhodamine B (RB), to achieve an epoxy-based prepolymer. Then, a diamine, m-xylylenediamine (MXDA), was used as hardener with the purpose of obtaining a crosslinked polymer. The curing conditions strongly influence the intended final properties and the optimization of the curing requires a reliable kinetic model. For that reason, this work presents the kinetic study of the polymerization of the epoxy resin by differential scanning calorimetry (DSC) in isothermal mode as well as by Fourier transform infrared spectroscopy (FTIR). DSC data were fitted using a Kamal autocatalytic equation. Conversion as a function of reaction time curves obtained by means of both techniques agreed well. In addition, the synthesized epoxy-based materials were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR) and their fluorescent properties were also analysed.     

Molecular Dynamics of PGA Bioabsorbable Polymer During Isothermal Cold Crystallization

An investigation was carried out on the molecular dynamics of poly(glycolide) (PGA) in its completely amorphous state and during isothermal cold crystallization. Experimental results were generated over a wide range of frequency and temperature by broad-band dielectric spectroscopy (DRS). The variation of the average relaxation time (defined as τ= ½πf_max where f_max is the frequency at maximum loss for the main α relaxation) has been studied during cold crystallization and the temperature dependence of this average relaxation time for completely amorphous and crystallized samples has been analyzed. This behaviour has been modelled by Havriliak-Negami and Vogel-Fulcher equations. The sensitiveness of the segmental dynamics to the degree of crystallinity has been analyzed, taking into account the relaxing segments and the amorphous layers between lamellae. Supporting evidence about the thermal behaviour of the polymers has been obtained with DSC. Complementarily, the evolution of the morphologies obtained during crystallization processes has been followed by optical microscopy.     

Multifunctional Thermally Reversible Nanostructured Thermosetting Materials Based on Block Copolymers Dispersed Liquid Crystal

Thermally reversible nanostructured thermosetting materials are prepared for the first time by modification of an epoxy resin with 5 wt.‐% of an amphiphilic polystyrene‐block‐poly(ethylene oxide) block copolymer (PSEO) and 30 wt.‐% of a low‐molecular‐weight liquid crystal, 4′‐(hexyl)‐4‐biphenylcarbonitrile (HBC). The epoxy system modified with 5 wt.‐% PSEO amphiphilic copolymer self‐assembles into spherical microdomains with a size distribution between 32 and 45 nm in diameter. Under the same conditions, the modification of an epoxy system with 5 wt.‐% PSEO and 30 wt.‐% HBC leads to a micro‐phase separated PS‐rich domains embedded in a HBC phase. The morphology of this nanostructured thermosetting system consists in a higher amount of spherical microdomains of PSEO/HBC with the size distribution between 40 and 75 nm in diameter. This implies that the separation of the PS‐rich phase provokes the separation of the liquid crystal and allows one to obtain a novel thermally switchable smart material.

     

Surface free energy of films of alkali-treated cellulose microfibrils from banana rachis

Cellulose microfibrils extracted by various alkaline treatments of vascular bundles from banana rachis were used to elaborate films. The films were comparatively studied to determine changes in polarity induced by various treatments. Atomic force microscopy was used to characterize the surface morphology of the films and transmission electron microscopy was employed to characterize the microfibrils used to elaborate the films. Contact angles were measured to determine surface free energy (SFE) and thermogravimetric analyses were carried out to determine changes in composition of the films. The results showed that the films of cellulose microfibrils prepared by the peroxide alkaline (PA) and peroxide alkaline-hydrochloric acid (PA-HCl) treatments had lower content of non-cellulosic constituents like xylose and had lower SFE than films of microfibrils treated with KOH-5. Furthermore, specimens treated with the most concentrated KOH solution (18 wt%) and sodium chloride presented the highest SFE and polar component.     

Curing kinetics of amine and sodium hydroxide catalyzed phenol-formaldehyde resins

The effect of both formaldehyde content and catalyst type used in the synthesis of several resole type phenolic resins has been studied by using differential scanning calorimetry. In this study Kissinger-Akahira-Sunose (KAS), Ozawa-Flynn-Wall (OFW) and Friedman model-free kinetics are applied in order to correlate the dynamic cure behaviour with the mentioned synthesis variables. Strong upward dependency of activation energy on conversion has been detected in all cases up to a maximum value. Lower the formaldehyde content fewer changes in activation energy have been detected, revealing a more homogeneous polymerization. As formaldehyde content increases, stronger variations of energy values have been observed and the maximum value is shifted to lower conversions. By comparing triethylamine and sodium hydroxide catalysts similar behaviour has been observed, with higher energy values and shifting of the maximum in the latter. Friedman approach has been resulted in more convenient and accurate for the energy values determination and KAS method seems useful for the dynamic cure prediction of that type of thermoset.     

Kinetics and Morphology of an Epoxy Resin Modified with PEO-PPO-PEO Block Copolymers

Block copolymers are a special class of polymers having the ability to self-assemble into nanoscale ordered structures which depend on molecular composition of the blocks. With the aim of studying the influence of copolymer composition, the kinetics of a 4,4′-diaminodiphenylmethane-cured diglycidyl ether of bisphenol-A (DGEBA) epoxy system modified with a PEO-PPO-PEO block copolymers has been investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), taking into account the relation between blocks in the copolymer as well as different copolymer contents. DSC results show that the rate of cure reaction decreases when the copolymer is added, which can be attributed to the interaction between the hidroxyl groups of the growing epoxy thermoset and the ether groups of the block copolymer observed by FTIR. The experimental results obtained have been related to the morphologies observed by atomic force microscopy (AFM).     

Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting‐from atom transfer radical polymerization

A key problem with nanomaterials is the difficulty of controlling the dispersion of nanoparticles inside an organic medium. To overcome this problem, functionalization of the nanoparticle surface is required. Poly(methyl methacrylate) (PMMA) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. Modified magnetic nanoparticles with a graft density of 0.1 PMMA chains/nm² were obtained. Cu(II), used as a deactivating complex, allowed good control of the polymerization along with a narrow polydispersity of the polymer chains. The functionalized magnetic nanoparticles were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, and atomic force microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 925–932, 2007