High-throughput multiclass method for antibiotic residue analysis by liquid chromatography-tandem mass spectrometry

A simple and rapid method has been developed for the residue analysis of 39 antibiotics (tetracyclines, quinolones, penicillins, sulfonamides and macrolides) in foodstuffs of animal origin. The method combines an effective extraction technique, which uses water-methanol as extracting solvent, with ultra-high-pressure liquid chromatography-tandem mass spectrometry, allowing both confirmation and quantification in a single chromatographic run. The multiresidue method has been validated in chicken muscle matrix according to European Union Decision 2002/657/EC. It has been implemented as a routine method in a Public Health Laboratory, instead of the five plates test and LC methods previously used.     

Development of a pressurized liquid extraction-solid-phase extraction followed by liquid chromatography-electrospray ionization tandem mass spectrometry method for the quantitative determination of benzoxazolinones and their degradation products in agricultural soil

A new analytical method for the quantitative determination of benzoxazolinones and their degradation products in agricultural soils based on the use of pressurized liquid extraction (PLE) followed by solid-phase extraction (SPE) and then instrumental determination using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS-MS) is described. Using this method, the characterization, separation and quantitative detection of a mixture of two benzoxazolinones, benzoxazolin-2-one (BOA) and 6-methoxybenzoxazolin-2-one (MBOA) and their degradation products, 2-aminophenol (APH), N-(2-hydroxyphenyl)malonamic acid (HMPMA), 2-amino-3-H-phenoxazin-3-one (APO), 9-methoxy-2-amino-3-H-phenoxazin-3-one (AMPO), 2-acetylamino-3-H-phenoxazin-3-one (AAPO) and 2-acetylamino-9-methoxy-2-amino-3-H-phenoxazin-3-one (AAMPO) was achieved. The complete LC-ESI-MS-MS precursor-product ion fragmentation pathways for the degradation products of benzoxazolinones are described for the first time. Quantitative analysis was done in the multiple reaction mode using two specific combinations of precursor-product ion transitions for each compound. The optimized method was quality assessed by the measure of parameter as recovery, linearity, sensitivity, repeatability and reproducibility. Recoveries of the analytes ranged from 53 to 123%. The developed method offered improvements to the sensitivity as compared with our previously LC-MS method, with detection limits down to 2.4-21 ng/g of dry weight. This achievement allows us to identify and quantify for the first time degradation products of benzoxazolinones in real agricultural soil samples. Analytes were found in the range of 20.6-149 ng/g dry weight.     

Selective formal transesterification of fluorinated 2-(trimethylsilyl)ethyl alpha-imino esters mediated by TBAF

The scope of the transesterification reaction between beta-fluorinated alpha-imino esters and various electrophiles in the presence of TBAF as fluorine source is described. The reaction is highly selective for alkyl iodides, bromides, and mesylates, while alkyl chlorides react at a significantly slower rate and tosylates do not react under the reaction conditions. This methodology represents a simple and useful alternative for the preparation of a wide variety of fluorinated alpha-imino esters.     

Site-selective catalysis of phenyl thionoformate transfer as a tool for regioselective deoxygenation of polyols

We report the application of peptide-embedded imidazoles as catalysts for the site-selective delivery of the phenyl thionoformate unit as a prelude to deoxygenation reactions of polyols. Methodology was developed that allows for the synthesis of thiocarbonyl derivatives based on a combination of additives that include N-alkylimidazoles and FeCl3 as co-catalysts. The use of this reagent combination leads to increased reaction rates and efficient yields relative to those of simple base-mediated reactions. In terms of controlling regioselectivity during the course of polyol modification, we found that histidine-containing peptides, in combination with FeCl3, could lead to modulation of the product distribution. Through screening of peptides and control of reaction conditions, products could be observed that reflected both the inherent preference of substrates and also reversal of inherent selectivity.     

Highly beta-(E)-selective hydrosilylation of terminal and internal alkynes catalyzed by a (IPr)Pt(diene) complex

The regioselective hydrosilylation of terminal and internal alkynes catalyzed by the novel (IPr)Pt(AE) ( 7) (IPr = bis(2,6-diisopropylphenyl)imidazo-2-ylidene, AE = allyl ether) complex is presented. The (IPr)Pt(AE) catalyst displays enhanced activity and regioselectivity for the hydrosilylation of terminal and internal alkynes with low catalyst loading (0.1 to 0.05 mol %) when compared to the parent (IPr)Pt(DVDS) complex ( 6) (DVDS = divinyltetramethyldisiloxane). The reaction leads to exquisite regioselectivity in favor of the cis-addition product on the less hindered terminus of terminal and internal alkynes. The solvent effects were examined for the difficult hydrosilylation of benzylpropargyl ether. In light of the observed product distribution and kinetic data, a mechanistic scheme is proposed involving two competing catalytic cycles. One cycle leads to high regioselectivities while the other, having lost the stereodirecting IPr carbene ligand, displays low regiocontrol and activities. The importance of this secondary catalytic cycle is either caused by the strong coordinating ability of the alkyne or by the low reactivity of the silane or both.     

Diastereoselective synthesis of allosecurinine and viroallosecurinine from menisdaurilide

A new and versatile synthetic route to Securinega alkaloids is reported. The first synthesis of allosecurinine has been accomplished in seven steps and 40% yield, starting from (+)-menisdaurilide, using a vinylogous Mannich reaction as the key transformation. Similarly, viroallosecurinine has been synthesized from (-)-menisdaurilide.     

Sensitive and stable monitoring of lead and cadmium in seawater using screen-printed electrode and electrochemical stripping analysis

Sensitive and stable monitoring of heavy metals in seawater using screen-printed electrodes (SPE) is presented. The analytical performance of SPE coupled with square wave anodic stripping voltammetry (SWASV) for the simultaneous determination of Pb and Cd in seawater samples, in the low μg L⁻¹ range, is evaluated. The stripping response for the heavy metals following 2 min deposition was linear over the concentration range examined (10-2000 μg L⁻¹) with detection limits of 1.8 and 2.9 μg L⁻¹ for Pb and Cd, respectively. The accuracy of the method was validated by analyzing metal contents in different spiked seawater samples and comparing these results to those obtained with the well-established anodic stripping voltammetry using the hanging mercury drop electrode. Moreover, a certified reference material was also used and the results obtained were satisfactory.     

The metal loading ability of beta-amyloid N-terminus: a combined potentiometric and spectroscopic study of copper(II) complexes with beta-amyloid(1-16), its short or mutated peptide fragments, and its polyethylene glycol (PEG)-ylated analogue

Alzheimer's disease (AD) is becoming a rapidly growing health problem, as it is one of the main causes of dementia in the elderly. Interestingly, copper(II) (together with zinc and iron) ions are accumulated in amyloid deposits, suggesting that metal binding to Abeta could be involved in AD pathogenesis. In Abeta, the metal binding is believed to occur within the N-terminal region encompassing the amino acid residues 1-16. In this work, potentiometric, spectroscopic (UV-vis, circular dichroism, and electron paramagnetic resonance), and electrospray ionization mass spectrometry (ESI-MS) approaches were used to investigate the copper(II) coordination features of a new polyethylene glycol (PEG)-conjugated Abeta peptide fragment encompassing the 1-16 amino acid residues of the N-terminal region (Abeta(1-16)PEG). The high water solubility of the resulting metal complexes allowed us to obtain a complete complex speciation at different metal-to-ligand ratios ranging from 1:1 to 4:1. Potentiometric and ESI-MS data indicate that Abeta(1-16)PEG is able to bind up to four copper(II) ions. Furthermore, in order to establish the coordination environment at each metal binding site, a series of shorter peptide fragments of Abeta, namely, Abeta(1-4), Abeta(1-6), AcAbeta(1-6), and AcAbeta(8-16)Y10A, were synthesized, each encompassing a potential copper(II) binding site. The complexation properties of these shorter peptides were also comparatively investigated by using the same experimental approach.     

Synthesis and crystal structure of thorium bis(hydrogenphosphate) monohydrate

Microcrystals of Th(HPO 4) 2.H 2O were hydrothermally obtained from a Th(NO 3) 4-CO(NH 2) 2-H 3PO 3-H 2O system ( T = 180 masculineC). The structure [orthorhombic, Pbca, a = 9.1968(2) A, b = 18.6382(2) A, c = 8.7871(2) A], unlike alpha-Zr(HPO 4) 2.H 2O-type layered compounds, consists of a three-dimensional framework with PO 4 tetrahedra coordinated to Th atoms. The water molecule is also coordinated to the Th atom and projected toward small channels running along the directions of the a and c axes. The ThO 6O(w) environment could be described as a highly distorted pentagonal bipyramid.     

Phosphorous acid and urea: valuable sources of phosphorus and nitrogen in the hydrothermal synthesis of ammonium-thorium phosphates

Microcrystals of the first ammonium-thorium phosphates, (NH 4) 2Th(PO 4) 2.H 2O (tetragonal, I4 1/ amd, a = 7.0192(4) A, c = 17.9403(8) A) and NH 4Th 2(PO 4) 3 (monoclinic, C2/ c, a = 17.880(6) A, b = 6.906(1) A, c = 8.152(2) A, beta = 104.39(2) degrees ) were hydrothermally obtained from a Th(NO 3) 4-CO(NH 2) 2-H 3PO 3-H 2O system ( T = 180 degrees C). In both cases, the structure consists of a three-dimensional framework with PO 4 tetrahedra coordinated to Th atoms (ThO n polyhedra, where n = 8 or 9, for the tetragonal or monoclinic phase, respectively). The ammonium ions (and water molecules) are located in the tunnels.