Monitoring the effects of homogeneity methanol/water/monomer on the mode of polymerization of styrene: dispersion polymerization versus emulsion polymerization

The polymerization of styrene (St) was carried out with varying amounts of methanol in aqueous medium. As methanol content decreased (to 50 %), the phase of polymerization mixture (methanol/water/monomer) changed to a heterogeneous state; the homogeneous state was obtained in samples that contain 75 and 100 % methanol. In order to verify the mechanism of polymerization in heterogeneous and homogeneous mixtures, the nucleus formation rate during polymerization, the stability equilibrium of the media and seeded particles, and the size of particles and their growth in polymerization were experimentally being monitored. With the homogeneous mixture in 75 wt% methanol, dumbbell, triangle, and peanut-like particles have been formed. On the other hand, the characteristics of the polymerization products were different from those typically obtained in the emulsion polymerization and in the sample with 100 wt% methanol dispersion polymerization. In the sample with 100 % methanol and in one with 50 % methanol, monodispersed spherical particles are formed in the final conversion. Thus, homogeneity in the aqueous methanol mixture can be a critical factor in determining the polymerization modes between dispersion and emulsion polymerization.     

New nanocomposites containing metal nanoparticles, carbon nanotube and polymer

Metal-carbon nanotube-graft-polymer (MCNT-g-P) nanocomposites were synthesized and characterized successfully. In this work, multiwall carbon nanotubes (MWCNT) were opened using HNO₃/H₂SO₄ mixture and filled by metal nanoparticles such as silver nanoparticles through wet chemistry method. Then MWCNT containing metal nanoparticles were used as macroinitiator for ring opening polymerization of ε-caprolactone and MCNT-g-P nanocomposites were obtained. Length of grafted polymer arms onto the MWCNT was controlled using MWCNT/ε-caprolactone ratio. Structure and properties of nanocomposites were evaluated by TEM, DSC, TGA, and spectroscopy methods.     

Forthcoming articles

Other Index

Forthcoming articles     

孤立子内波引起的高号简正波到达时间起伏

在新泽西附近海域进行的浅海实验(SW'06)观测到了大量的孤立子内波。利用SW'06海洋环境资料分析了有无孤立子内波存在时的脉冲声到达时间起伏。发现当孤立子内波出现时,1号简正波到达时间较为稳定,而一些高号简正波到达时间比第1号简正波提前,且随着温跃层深度变化而起伏。经射线理论分析表明:由于孤立子内波出现,导致温跃层深度下降,进而引起满足一定掠射角条件的高号简正波将主要在温跃层上传播。这类高号简正波到达时间对孤立子内波活动敏感,有可能被用来监测浅海中的孤立子内波。     

Preserving maximal monotonicity with applications in sum and composition rules

In this paper, we study maximal monotonicity preserving mappings on the Banach space X × X ^*. Indeed, for a maximal monotone set ${M \subset X\times X^*}$ and for a multifunction ${T: X \times X^* \multimap Y \times Y^*}$ , under some sufficient conditions on M and T we show that T(M) is maximal monotone. As two consequences of this result we get sum and composition rules for maximal monotone operators.     

Reverse phase HPLC determination of sunitinib malate using UV detector,its isomerisation study,method development and validation

Sunitinib malate, as an anticancer compound and a multi-targeted tyrosine-kinase inhibitor for treatment of glioma, was comprehensively studied by using different liquid chromatography methods. Since sunitinib malate shows Z-E isomerism, various reverse phase high performance liquid chromatography (RP-HPLC) programs were designed to access quantitative determination and good separation of Z-E stereoisomers. Moreover, some impurities including N-oxide and impurity B were to be separated from the main isomer with acceptable resolution. In the present work, different RP-HPLC programs were developed in which the type of mobile phase, flow rate, pH, and temperature were optimized to reach the best analysis conditions and control the rate of Z to E conversion. In addition, the effect of some operational parameters during the solution preparation including initial concentration of the analyte, temperature, pH, and type of solvent on the stability of Z isomer were investigated. The opted conditions for quantitative analysis were C8-Hector column as stationary phase, methanol as solvent, ammonium acetate buffer containing triethylamine as mobile phase, the pH of mobile phase of 8.5, the flow rate of 1.0 mL/min, and detection at 425 nm. In this situation the peaks of E and Z isomers were at 16.3 and 19.7 min. Full validation of the designed method was done based on ICH guidelines.     

XPS study of some selected selenium compounds

X-ray photoelectron spectroscopy (XPS) of the Se 3d peak for Se in Se, SeO₂, As₂Se₃, ZnSe, CdSe, CoSe, FeSe, CrSe, VSe₂ and TiSe were studied. It was found that, firstly, in the case of As₂Se₃, ZnSe, CdSe, CoSe and CrSe, as the change in electronegativity of the anion increases, the change in the binding energy value of the Se 3d peak also increases and, secondly, in all of the Se compounds studied, the Se-Se bond in pure Se is stronger than the Se-x bond, where X = As, Zn, Cd, Co, Fe, Cr, V and Ti.     

Spectrophotometric resolution of ternary mixtures of pseudoephedrine hydrochloride, dextromethorphan hydrobromide, and sodium benzoate in syrups using wavelength selection by net analyte signals calculated with hybrid linear analysis

Hybrid linear analysis (HLA), as a recent factor-based multivariate calibration technique, was applied for the spectrophotometric determination of ternary mixtures of pseudoephedrine hydrochloride (PSU), dextromethorphan hydrobromide (DXT), and sodium benzoate (BNZ). The utilized HLA was assisted by a wavelength selection procedure which was based on the calculation of the net analyte signal (NAS) regression plot in any considered wavelengths window for each test sample, in addition to a moving window strategy for searching the region with maximum linearity of NAS regression plot (minimum error indicator (EI)). HLA was applied because it was simpler to adapt to the NAS regression plot methodology, and also used less factors than partial least squares (PLS). An orthogonal array design was applied for formation of calibration and prediction sets in the concentration ranges 0-7500 μmol L⁻¹ for PSU, 0-300 μmol L⁻¹ for DXT, and 0-1400 μmol L⁻¹ for BNZ. The method had the ability to select wavelength regions that minimize the effect of non-linearity of the spectral data, in addition to that of non-modeled interferences. The application of the selected wavelength regions improved the obtained relative standard error of predictions for PSU, DXT, and BNZ, respectively, from 5.24, 8.67, and 5.48% to 2.19, 5.21, and 3.62% (using lower number of factors). To check the ability of the proposed method in selection of linear regions of spectra, a test for detecting non-linear regions of spectral data in multivariate spectroscopic assays was also described. Additives in the commercial syrup samples did not interfere with their determinations. The method was successfully applied for the determination of pseudoephedrine HCl, dextromethorphan HBr, and sodium benzoate in cough suppressant syrup samples.