Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Per Aqueous Liquid Chromatography (PALC) as a Simple Method for Native Separation of Protein A

Staphylococcal protein A (protein A) is an important protein frequently used in research studies within the fields of biomedicine and biotechnology. Due to some limitations in available protein purification methods which can hold the native structure of the protein A without changing the folding or adding histidine to structure of this protein, its separation in the native form is difficult. In this study, a new cost-effective and powerful technique was introduced for separation of the full-length and truncated forms of recombinant protein A, without any alteration in their 3D structures. Per aqueous liquid chromatography with bare silica gel stationary phase and water:acetonitrile as the mobile phase was proved to be an attractive choice among the range of separation methods. Similar to hydrophilic liquid chromatography, this method employs high percentage of water in mobile phase. The effects of mobile phase composition, pH, and salt concentration on the retention behavior of protein A on bare silica gel stationary phases were investigated. In this method, applying high amounts of aqueous solvent accompanied by a minimum percentage of organic solvent could successfully separate protein A with preservation of folding, and any affinity-tagged group such as histidine has not occurred on its structure. Purity of the fractions obtained by the proposed method was confirmed using SDS-PAGE, western blotting, and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. According to the results of ELISA, separated proteins retained their ability of binding to antibody.     

One-pot synthesis of multisubstituted imidazoles catalyzed by Dendrimer-PWA<Superscript>n</Superscript> nanoparticles under solvent-free conditions and ultrasonic irradiation

An efficient, green and eco-friendly protocol has been developed for the synthesis of 2,4,5-trisubstituted and 1,2,4,5-tetrasubstituted imidazoles via one-pot condensation reaction using Dendrimer-PWAⁿ as catalyst under solvent-free conditions or ultrasonic irradiation in excellent yields. The reactions under conventional heating conditions were compared with the ultrasonic-assisted reactions. The operational simplicity, practicability and applicability of this protocol to various substrates make it an interesting alternative to previous procedures. The present methodology offers several advantages such as excellent yields, short reaction times, a cleaner reaction, and the absence of any tedious work-up or purification. The catalyst is easily separated from the products by filtration and also exhibits remarkable reusable activity. SEM, BET and DLS of the catalyst were also investigated after each reaction cycle.     

Effect of electric field strength and exposure time on epoxy and high density polyethylene measured by positron annihilation lifetime

Using the positron annihilation lifetime technique, the annihilation parameters have been measured for epoxy and high density polyethylene (HDPE) as a function of AC electric field strength and the exposure time. The lifetime spectra have been resolved into three components, the longest component (I₃₃) is attributed to the pick-off annihilation of o-Ps in the amorphous regions. The intermediate one (I₂₂) is due to the annihilation of free positrons, while the shorter component (I₁₁) stems from self annihilation of p-Ps. In HDPE, the o-Ps parameters ₃ andI ₃ are measured as a function of electric field strengths in the range from 10 to 100 kV/cm exposed for 24 hours. A decrease inI ₃ of 8% is observed from zero to 50 kV/cm followed by an increase of the same order from 50 to 100 kV/cm. By investigating the effect of the exposure time from 2 to 24 hours at 16 and 50 kV/cm, the effect is confirmed and is attributed to the inhibition of o-Ps formation at lower field strength. In epoxy, the effect or exposure time onI ₃ at 166 and 133 kV/cm shows a similar behavior as in HDPE. At 133 kV/cmI ₃ decreases by only 2.5%. On the other hand, the changes in ₃ occur at short exposure times. Again at large times the saturation is obtained. These effects are attributed to the expansion of free volume (increase of ₃) competing at longer exposure times with other phenomena, such as liberation of free radicals, which reduce the o-Ps intensityI ₃ through the conversion to p-Ps. The reactions between o-Ps and free radicals might also lead to free positrons, which could explain the increase ofI ₂ and the decrease of ₃ at longer exposure times.     

Electrochemical synthesis and characterization of solid-phase microextraction fibers using conductive polymers: application in extraction of benzaldehyde from aqueous solution

In this work, polyaniline, polypyrrole, and polyaniline/polypyrrole composite fibers were synthesized in the absence and presence of oxidized multiwalled carbon nanotubes using electrochemical cyclic voltammetry with CF₃COOH as dopant. Thermal stability of these fibers was studied by differential scanning calorimetry. Then, headspace solid-phase microextraction process coupled with gas chromatography and flame ionization detector was used for comparing extraction capability of benzaldehyde from aqueous solution. Since polyaniline fiber showed better extraction efficiency than the other fibers, its preparation conditions including acid concentration, aniline concentration, scan rate, and amount of multiwalled carbon nanotubes were studied by means of the “one-factor-at-a-time method”. The analytical performance of polyaniline fibers were investigated to determine benzaldehyde from the aqueous solution. The morphology and texture of polyaniline fibers were examined by field emission scanning electron microscopy and Fourier transform infrared spectroscopy analyses. The attained results revealed that the perfect conditions for acid concentration, aniline concentration, scan rate, and multiwalled carbon nanotubes content were 0.5 M, 0.2 M, 25 mV s^?1, and 0.02 wt%, respectively. The limit of detection for the proposed polyaniline fiber was 15 ng ml^?1.     

Catalyst-free,aqueous and highly diastereoselective synthesis of new 5-substituted 1H-tetrazoles via a multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction

An approach for the synthesis of new 5-substituted-tetrazoles via multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction of carbonyl compounds, malononitrile and sodium azide in water without assistance of any catalyst has been reported. This general protocol provides a wide variety of 5-substituted 1H-tetrazoles in good yields under mild reaction conditions.     

P NMR study of the stoichiometry, stability and thermodynamics of complex formation between palladium(II) acetate and bis(diphenylphosphino)ferrocene

The complexation reaction between palladium (II) acetate, and 1,1′-bis(diphenylphosphino)ferrocene, DPPF, was investigated in two different deuterated solvents CDCl₃ and DMSO at various temperatures using ³¹P NMR spectroscopy. The exchange between free and complexed DPPF is slow on the NMR time scale and consequently, two ³¹P NMR signals were observed. At metal ion-to-ligand mole ratio larger than 1, only one ³¹P NMR signal was observed, indicating the formation of a 1:1 Pd²⁺–DPPF complex in solution. The formation constant of the resulting 1:1 complexes was determined from the integration of two ³¹P signals. The values of the thermodynamic parameters (ΔH, ΔS and ΔG₂₉₈) for complexation were determined from the temperature dependence of stability constants. It was found that, in both solvents, the resulting complex is mainly entirely enthalpy stabilized and the ΔH compensates the TΔS contribution.     

The influence of hydrophobic amino acid side groups on the acidity of the aromatic imidazole ring of histidine: A theoretical study

In this study we have calculated the acidity constant (pKa) of imidazole ring in Histidine‐Hydrophobic amino acid dipeptides using the quantum chemistry and continuum solvation methods. Density functional theory calculations with the large basis sets are used to determine the Gibbs free energy of deprotonate in the gas and liquid phases. Based on our results ΔG_S values are located between ?69.38 and ?18.82 kcal mol^?1 which are related to His⁺–Gly and His forms, respectively. pKa of the dipeptides in the aqueous phase was obtained from the calculated gas‐phase and solvation free energies through a thermodynamic cycle and the solvation model chemistry of Martin Karplus et al. Solvation effects are treated using a self‐consistent reaction field formalism involving polarized continuum models. According to our calculations pKa values are between 5.50 and 8.19 that are belong to His⁺–ILe and His⁺–Ala forms, respectively. Natural bond orbital analysis of dipeptides reveals that the electron delocalization in imidazole ring is the most effective factor in determination of acidity order for these compounds. Structural analysis confirmed that the orientation of carbonyl group with respect to imidazole ring is an effective factor in imidazole ring stability. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011