激光解吸电离质谱新型液相基质研究

选用包括纳米粒子在内的多种基质化合物,构成了多种不同组成的液相基质.以多肽、蛋白、大环寡糖和有机小分子等数种类型化合物为样品,系统地考察了不同液相基质在基质辅助激光解吸电离飞行时间质谱(MALDI-TOF)分析中的应用情况,探讨了与固体制样方法的异同点.实验结果表明,有些液相基质对多类化合物具有较好的通用性,而有些液相基质对某些特定类型化合物的分析特别有效.     

聚丙烯表面接枝PNIPAAm膜Ⅰ.光接枝反应和表面形态结构研究

以氧杂蒽酮或二苯甲酮为引发剂 ,通过紫外光引发表面接枝聚合的方法在聚丙烯薄膜表面引入了具有温度敏感特性的聚异丙基丙烯酰胺 (PNIPAAm)接枝聚合物层 .提高紫外光强度和接枝反应温度均有利于接枝率增大 ,而单体浓度对接枝率的影响存在最佳值 ,为 0 1 8mol L .在引发剂预浸渍引发接枝和休眠基引发接枝这两种方式中 ,后者能够实现更高的接枝率 .红外光谱 (FTIR)、X射线光电子能谱化学分析 (ESCA)和扫描电子显微镜 (SEM)等对接枝层组成的表征结果证实了接枝层的存在 .在不同温度下 ,接枝膜的FTIR谱图中酰胺I带和酰胺II带特征吸收峰发生位移 ,表明它具有温度敏感特性 .同时 ,SEM研究发现由于接枝膜的温度敏感特性而导致的球状表面形态结构     

The Synthesis of Third—order Optical Nonlinear Organic Polyheterocyclic Materials

Synthesis of the third-order nonlinear materials:bis (1,4-dihydroxynaphthalene) tetrathiafulvalene and bis (1,4-dialkoxylnaphthalene) tetrathiafulvalene has been achieved in four steps, starting from 2,3-dichloro-1,4-naphthaquinone. The materials exhibit larger third-order nonlinear optical susceptibilities χ.     

Site-selective labeling strategies for screening by NMR

NMR based screening has become an important tool in the pharmaceutical industry. Methods that provide information on the location of small molecule binding sites on the surface of a drug target (e. g. SAR-by-NMR and related techniques) are of particular interest. In order to extend the applicability of such techniques to drug targets of higher molecular weight, selective labeling strategies may be employed. Dual-amino acid selective labeling and site directed non-native amino acid replacement (SNAAR) allow for the selective detection of NMR resonances of a specific amino acid residue. This results in significantly reduced spectral complexity, which not only enables application to higher molecular weight systems, but also eliminates the need for sequential resonance assignment in order to identify the binding site. Regio-selective (or segmental) labeling of an entire protein domain of a multi domain protein may also be achieved. Labeling only a selected part of a multi domain protein (e. g. a catalytic or ligand binding domain) is an attractive way to simplify the spectral interpretation without disturbing the system under study.     

Preparation of Diphenyl Oxalate from Transesterification of Dimethyl Oxalate with Phenol over TS—1 Catalyst

Diphenyl oxalate was synthesized from transesterification of dimethyl oxalate with phenol over TS-1(2.5 wt% Ti)catalyst.TS-1 catalyst,as a beterogeneous catalyst,showed excellent selectivity of diphenyl oxalate and methylphenyl oxalate compared with other homogeneous catalysts.Lewis acid sites on TS-1 catalyst were the active sites for transesterification of dimethyl oxalate with phenol.the high selectivity was closely related to the weak acid sites over TS-1.     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

有机硅改性聚氨酯的合成与性能

在无溶剂条件下利用二步法合成了一系列氨基硅油改性聚氨酯,采用红外光谱对预聚体进行了表征,同时测试了材料的力学性能、耐热性、表面水接触角及微观形态,结果表明,改性后的聚氨酯具有优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。     

电位滴定法同时测定电合成产物苯甲醛和苯甲酸

电位滴定;电位滴定法同时测定电合成产物苯甲醛和苯甲酸     

铱(Ⅲ)与2-(5-溴-2-吡啶偶氮)-5-二甲氨基苯胺的显色反应及其应用

研究了试剂2_(5_溴_2_吡啶偶氮 )_5_二甲氨基苯胺 (5_Br_PADMA)与铱 (Ⅲ )的显色反应 ;在 pH4.75～6.00的HAc -NaAc缓冲溶液中 ,铱 (Ⅲ )与5_Br_PADMA形成摩尔比为1∶2型稳定的红色络合物 ,在0.6mol/LH2SO4溶液中 ,其最大吸收波长为558nm ,表观摩尔吸光系数为5.1×104L/(mol·cm) ,铱 (Ⅲ )含量在0～0.8mg/L范围内符合比尔定律 ,采用加入适量EDTA的方法消除了Fe3 + 、Co2 + 、Ni2 + 等干扰离子 ,建立了在二元络合物体系中测定微量铱 (Ⅲ )的灵敏度高、选择性好、简便、稳定的分光光度法     

Morphology and degradation of biodegradable poly(L-lactide-co-β-malic acid)

Poly(L -lactide-co-β-malic acid) was obtained after the hydrogenolysis of the copolymer of L -lactide (L-LA) and β-benzyl malate (MA). ¹H-NMR demonstrated that the composition of the copolymer was identical to the feeding dose. Thermal property study revealed the morphology of the copolymer could be changed from semi-crystalline to amorphous with increasing hydrophilic β-malic acid content. The copolymers with 8 and 13 mol% β-malic acid content possessed enough mechanical property for fabricating cell scaffold. Degradation result demonstrated that most of the hydrophilic β-malic acid units broke down from the copolymer within 1 week and the ester bond between L -lactide and β-malic acid hydrolyzed prior to the inner ester bond of poly(L -lactide) (PLLA). Copyright © 2003 John Wiley & Sons, Ltd.