Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.     

Synthesis and characterization of MFe2O4 sulfur nanoadsorbents

Nanoparticles of ferrites (Fe₃O₄, NiFe₂O₄, CuFe₂O₄, and MnFe₂O₄) were prepared by a reverse (water/oil) microemulsion method. The microemulsion system consisted of cetyltrimethylammonium bromide, 1-butanol, cyclohexane, and a metal salt solution. The procedure was carried out using aqueous ammonia as the coprecipitating agent. Nanosized particles were characterized by thermal analysis, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and pyridine adsorption. The NiFe₂O₄ sample exhibited narrow mesoporous pore size distribution and high surface area ≈233 m²/g. It achieved good adsorption activity towards the dibenzothiophene (DBT) compound (166.3 μmol/g of DBT adsorbent). The structural properties obtained were very interesting for potential applications in the desulfurization process in petroleum refining.     

Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

This paper reports the first detailed study focussed upon identifying the influence that microwave heating (MWH) has upon the mechanic steps involved in the tin catalysed ring-opening of lactones such as ?-caprolactone (CL). Direct comparison of conventional (CH) and microwave (MWH) heated kinetic studies showed that a key factor in the reduction of the polymerisation cycle time with MWH was the elimination of the induction period associated with in situ catalyst manufacture and initiation. NMR studies demonstrated that the most significant mechanistic change contributing to the observed induction time reduction/elimination was faster initiation (i.e., reaction of the initiatior/catalyst complex with the first monomer unit). Consequently, analysis of the dielectric properties of the reaction components predicted that this MWH induced change was related to the selective volumetric heating of both the catalyst and the monomer. Furthermore, this indication of the greater significance of the initiation step in defining the length of the induction period suggests that this is the rate determining step of the process, whether conducted by CH or MWH. Increasing the catalyst concentration was demonstrated to produce significant reductions in reaction heat-up time and to induce a significant (up to 30 °C) overshoot in reaction mixture bulk temperature in with MWH only. Thus supporting the conclusion that selective heating of the organometallic species in the system contributes directly to differences in the reaction conditions and which need to be taken into account when drawing comparisons with CH systems. Consequently, both effects were concluded to be thermally generated from selective volumetric heating.     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.     

Effect of Experimental Variables on the Combustion Characteristics of Water-in-Diesel Emulsion Fuels

Water-in-diesel (W/D) emulsion fuels were prepared through an ultrasonic processor by using high energy emulsification method. Accordingly, the physical and chemical properties were analyzed. A decrease in viscosity was found in the emulsion fuel in contrast to the neat diesel which signifies the enhanced fluidity of the fuel. The emulsion fuel was then used to carry combustion tests in an internal combustion engine. A decrease in exhaust temperature was observed when a high surfactant to water ratio was used, which lead to minimal heat loss. As water is emulsified with diesel, effectiveness of combustion is improved rather than neat diesel fuel. It was also explored that the addition of water-in-diesel is influential in terms of reduction in exhaust gas emission such as carbon dioxide, carbon monoxide, ammonia from the internal combustion engine. Therefore, this type of emulsion fuel would be a useful contribution in the fuel economy, but also in making it environmentally friendly since diesel fuel is now considered one of the leading fuels causing ecological contamination.     

In vitro dielectrophoresis of HEK cell migration for stimulating chronic wound epithelialization

This article describes a dielectrophoresis (DEP)-based simulation and experimental study of human epidermal keratinocyte (HEK) cells for wounded skin cell migration toward rapid epithelialization. MyDEP is a standalone software designed specifically to study dielectric particles and cell response to an alternating current (AC) electric field. This method demonstrated that negative dielectrophoresis (N_DEP) occurs in HEK cells at a wide frequency range in highly conductive medium. The finite element method was used to characterize particle trajectory based on DEP and drag force. The performance of the system was assessed using HEK cells in a highly conductive EpiLife suspending medium. The DEP experiment was performed by applying sinusoidal wave AC potential at the peak-to-peak voltage of 10 V in a tapered aluminum microelectrode array from 100 kHz to 1 MHz. We experimentally observed the occurrence of NDEP, which attracted HEK cells toward the local electric field minima in the region of interest. The DIPP-MotionV software was used to track cell migration in the prerecorded video via an automatic marker and estimate the average speed and acceleration of the cells. The results showed that HEK cell migration was accomplished approximately at 6.43 μm/s at 100 kHz with 10 V, and F_DEP caused the cells to migrate and align at the target position, which resulted in faster wound closures because of the application of an electric field frequency to HEK cells in random locations.