Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.     

The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Oxazoline‐Based Organocatalyst for Enantioselective Strecker Reactions: A Protocol for the Synthesis of Levamisole

A chiral oxazoline‐based organocatalyst has been found to efficiently catalyze asymmetric Strecker reactions of various aromatic and aliphatic N‐benzhydrylimines with trimethylsilyl cyanide (TMSCN) as a cyanide source at ?20 °C to give α‐aminonitriles in high yield (96 %) with excellent chiral induction (up to 98 % ee). DFT calculations have been performed to rationalize the enantioselective formation of the product with the organocatalyst in these reactions. The organocatalyst has been characterized by single‐crystal X‐ray diffraction analysis, as well as by other analytical methods. This protocol has been extended to the synthesis of the pharmaceutically important drug molecule levamisole in high yield and with high enantioselectivity.     

The Ligand‐Based Quintuple Bond‐Shortening Concept and Some of Its Limitations

Herein, the ligand‐based concept of shortening quintuple bonds and some of its limitations are reported. In dichromium–diguanidinato complexes, the length of the quintuple bond can be influenced by the substituent at the central carbon atom of the used ligand. The guanidinato ligand with a 2,6‐dimethylpiperidine backbone was found to be the optimal ligand. The reduction of its chromium(II) chloride–ate complex gave a quintuply bonded bimetallic complex with a Cr? Cr distance of 1.7056 (12) Å. Its metal–metal distance, the shortest observed in any stable compound yet, is of essentially the same length as that of the longest alkane C? C bond (1.704 (4) Å). Both molecules, the alkane and the Cr complex, are of remarkable stability. Furthermore, an unsupported Cr^I dimer with an effective bond order (EBO) of 1.25 between the two metal atoms, indicated by CASSCF/CASPT2 calculations, was isolated as a by‐product. The formation of this by‐product indicates that with a certain bulk of the guanidinato ligand, other coordination isomers become relevant. Over‐reduction takes place, and a chromium–arene sandwich complex structurally related to the classic dibenzene chromium complex was observed, even when bulkier substituents are introduced at the central carbon atom of the used guanidinato ligand.     

Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

This paper reports the first detailed study focussed upon identifying the influence that microwave heating (MWH) has upon the mechanic steps involved in the tin catalysed ring-opening of lactones such as ?-caprolactone (CL). Direct comparison of conventional (CH) and microwave (MWH) heated kinetic studies showed that a key factor in the reduction of the polymerisation cycle time with MWH was the elimination of the induction period associated with in situ catalyst manufacture and initiation. NMR studies demonstrated that the most significant mechanistic change contributing to the observed induction time reduction/elimination was faster initiation (i.e., reaction of the initiatior/catalyst complex with the first monomer unit). Consequently, analysis of the dielectric properties of the reaction components predicted that this MWH induced change was related to the selective volumetric heating of both the catalyst and the monomer. Furthermore, this indication of the greater significance of the initiation step in defining the length of the induction period suggests that this is the rate determining step of the process, whether conducted by CH or MWH. Increasing the catalyst concentration was demonstrated to produce significant reductions in reaction heat-up time and to induce a significant (up to 30 °C) overshoot in reaction mixture bulk temperature in with MWH only. Thus supporting the conclusion that selective heating of the organometallic species in the system contributes directly to differences in the reaction conditions and which need to be taken into account when drawing comparisons with CH systems. Consequently, both effects were concluded to be thermally generated from selective volumetric heating.     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.