Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Synthesis of steroidal thiadiazoles from steroidal ketones

Syntheses of steroidal heterocycles containing a five-membered N,S- heterocycle attached at the 6,7 positions of the B ring are reported. 5Alpha-cholestane-6-one (1), its 3beta-acetoxy- (2) and 3beta-chloro- (3) analogues reacted with semicarbazide and aqueous sodium acetate in refluxing ethanol to yield 5alpha-cholestan-6-one-semicarbazone 1a and its 3-beta-acetoxy and 3beta-chloro derivatives 2a and 3a, respectively. The reactions of 1a, 2a and 3a with thionyl chloride in dichloromethane at low temperature afforded the cyclized thiadiazole 4 and its 3beta-acetoxy- and 3beta-chloro analogues 5 and 6 in good yields.     

A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers

The polymerization of a cyclic butylene terephthalate (CBT) oligomer was studied as a function of temperature (T=200 and 260°C, respectively) by modulated DSC (MDSC). The first heating was followed by cooling after various holding times (5, 15 and 30 min) prior to the second heating which ended always at T=260°C. This allowed us to study the crystallization and melting behavior of the resulting polybutylene terephthalate (PBT), as well. In contrary to the usual belief, the CBT polymerization is exothermic and the related process is superimposed to that of the CBT melting. The melting behavior of the PBT was affected by the polymerization mode (performed below or above the melting temperature of the PBT product) of the CBT. Annealing above the melting temperature of PBT yielded a product featuring double melting. This was attributed to the presence of crystallites with different degrees of perfection. The crystals perfection which occurred via recrystallization/remelting was manifested by a pronounced exothermic peak in the non-reversing trace.     

A Chebotarev Theorem for finite homogeneous extensions of shifts

We derive a Chebotarev Theorem for finite homogeneous extensions of shifts of finite type. These extensions are of the form :X×G/H→X×G/H where (x,gH)=(σx, α(x)gH), for some finite groupG and subgroupH. Given a σ-closed orbit τ, the periods of the -closed orbits covering τ define a partition of the integer |G/H|. The theorem then gives us an asymptotic formula for the number of closed orbits with respect to the various partitions of the integer |G/H|. We apply our theorem to the case of a finite extension and of an automorphism extension of shifts of finite type. We also give a further application to ‘automorphism extensions’ of hyperbolic toral automorphisms. Financially supported by Universiti Kebangsaan Malaysia     

Chemical Constituents of Brown Rice Grain (<Emphasis Type="Italic">Oryza sativa</Emphasis>)

One new compound 3,7,11,15,19-pentamethyl-9α,10α,11α,17α,18α-pentahydroxy-n-tetracosan-1-oxy-p-hydroxycaffeoate (oryzaterpenyl caffeoate) (1), together with three known fatty acids linoleic acid, stearic acid and myristic acid were isolated and identified from the rice grain of Oryza sativa. The structure of the new compound was elucidated by 1D and 2D NMR spectroscopic techniques (¹H-¹HCOSY, ¹H-¹³C HETCOR) aided by EI-MS, and IR spectra. __________ Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 535–537, November–December, 2005.     

A new flavone from Malaysia Borneo Marsdenia tinctoria

Marsdenia tinctoria is an indigo producing plant commonly found in Borneo, Malaysia. In this present study, one new flavone kapitone (1) and three known compounds, that is 3,2’-dihydroxyflavone (2), 1-methylcyclobutene (3) and dimethyl isatoate (4) were isolated from the Malaysia Borneo M. tinctoria R. Br. (Apocynaceae). These compounds were isolated and characterised using extensive chromatographic and spectroscopic methods.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Split-shell molecular orbital calculations on the diatomic alkali metal molecules

Absolute g-tensor calculations for planar hydrocarbon and for non-planar phenyl substituted hydrocarbon radicals are reported. The relevant interactions determining g are discussed. Calculations are performed on the basis of a second-order perturbation expansion. The electronic wavefunctions are obtained from a simplified version of Hoffmann's extended Hückel model (SEH), where all valence electrons are taken into account explicitly. For planar systems the observed linear dependence of g on the energy of the half filled π orbital is well reproduced. A qualitative analysis of this dependence, making restrictive assumptions about the σ electrons, was given earlier by Stone. The calculations for non-planar model systems reproduce the g-factor anomalies which are observed for highly twisted phenyl substituted hydrocarbon radicals. The results show the necessity of direct π-σ mixing and are consistent with recent investigations of the proton hyperfine couplings in such systems.