Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Electrical and electrochemical characteristics of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3-δ</Subscript> cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting solid oxide fuel cell application

The electrical conductivity and electrochemical performance of a La_0.6Sr_0.4CoO_3-δ (LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated carbon are characterized for a proton-conducting solid oxide fuel cell (H⁺??SOFC) application at intermediate temperature. Thermogravimetric analysis revealed that the decomposition of the unrequired intermediate compounds in the precalcined powder was completed at 800?°C. A single LSC perovskite phase was formed at a calcination temperature of 900?°C, as confirmed by X-ray diffraction analysis. The particle size, crystallite size, and BET-specific surface area of the powder are 219–221?nm, 18?nm, and 9.87?m²?g^?1, respectively. The high index value of the extent of agglomeration (5.53) showed that the powder was barely agglomerated. Bulk LSC sintered at 1200?°C for 2?h showed the highest direct-current electrical conductivity (σ_d.c) compared to that of bulk LSC sintered at 1000?°C and 1100?°C. The value of σ_d.c was affected by the density and porosity of the sintered samples. The area specific resistance (ASR) of screen-printed LSC working on a proton conductor of BaCe_0.54Zr_0.36Y_0.1O_2.95 (BCZY) decreased from 5.0?Ω?cm²–0.06?Ω?cm² as the temperature increased from 500?°C to 800?°C with an activation energy of 1.079?eV. Overall, in this work, the LSC material produced with the aid of activated carbon meet the requirements for the application as a cathode in an intermediate temperature H⁺-SOFC.

Open image in new window

     

Comprehensive photokinetic and NMR study of a biphotochromic supermolecule involving two naphthopyrans linked to a central thiophene unit through acetylenic bonds

A photophysical and photochemical study of a biphotochromic compound where two naphthopyran units are linked by an acetylene-thiophene-acetylene bridge has been carried out in toluene. Both fluorescence and intersystem crossing to the triplet manifold were found to compete with the photocoloration process. Two photoproducts (transoid-trans and transoid-cis stereoisomers), absorbing at approximately 480 nm and corresponding to the opening of a single photochromic unit, were detected by spectrophotometric analysis after short irradiation time in diluted solution and identified by 1H-nuclear magnetic resonance (NMR) spectroscopy. After prolonged irradiation at 228 K of highly concentrated solutions (up to 3 x 10(-3) mol dm(-3)), two additional isomers, absorbing at approximately 550 nm, were formed. Their NMR spectra indicate the opening of both photochromic units. An interesting effect of selective vibronic excitation was found, showing that the photoreaction is favored at excited vibronic levels to the detriment of the radiative relaxation.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Alkaloids of and ( )

and provided a variety of and alkaloids as well as novel ring-opened indole alkaloids including leuconolam (6), rhazinilam (8) and 5,21-dihydrorhazinilam (9). Facile acid and base reactions of leuconolam lead to ring reclosure products. Physical and spectral data of norfluorocurarine ( ), norfluorocurarine-N_b-oxide ( ), eburnamine (2), kopsinine (5) and epileuconolam (7) as well as some derivatives of leuconolam are also provided.     

LDH-intercalated d-gluconate: Generation of a new food additive-inorganic nanohybrid compound

Intercalation of d-gluconate into the interlamellae of zinc-aluminum-layered double hydroxide for the formation of a food additive-inorganic layered nanohybrid was accomplished by both direct (co-precipitation) and indirect (ion-exchange) methods. Powder X-ray diffraction (PXRD) together with CHNS and Fourier transform infrared (FTIR) analyses showed that the hybridization of d-gluconate with pure phase and good crystallinity was successfully accomplished by a direct method within ranges of pH 7.5-10, Zn to Al initial molar ratio of 2-5 and DG concentration of 0.05-0.3 M. The same nanohybrid compound was also prepared using an indirect ion-exchange method by contacting the pre-prepared LDH with 0.1 M DG for 80 min. The basal spacing of the nanohybrid synthesized by the direct method ranged between 9 and 12.0 Å while that synthesized by the indirect ion-exchange method was 14.0 Å. The crystallinity of the latter was higher than the former and it inherited the crystallinity of the precursor. This work shows that a food additive, such as d-gluconate, can be hybridized into an inorganic host for the formation of a new nanohybrid compound, which can be used to regulate the release of acidity in the food industry.     

High-performance 850 nm vertical-cavity surface-emitting laser in Gigabit Ethernet network

High-performance oxide vertical-cavity surface-emitting (VCSEL) laser is fabricated, and its usefulness is demonstrated as a suitable transmitting light source at 850 nm operating wavelength for Gigabit Ethernet application. Utilization of barrier reduction layers reveals low-threshold current requirement for operation at high modulation bandwidth. The electrical and optical characteristics, measured from the fabricated VCSEL, are simulated for Gigabit Ethernet transmission. Data rates of 1.25 Gbps with a bit error rate of 10⁻¹¹ are achieved by the use of a specific multimode network simulator.     

Etude conformationnelle des formes ouvertes d'un spiropyranne benzothiazolinique

The results of the conformational study of a benzothiazolinic dimethinmérocyanine (open form) are described. Variations of electron π energy (Pariser-Parr-Pople method) and of non bonding energy are considered.All possible conformations have been investigated and the results of computations give evidence for a twisted structure, confirming a previous study taking account of σ and π electrons (Extended Huckel method).     

Synthesis of a cyclic peptide containing norlanthionine: effect of the thioether bridge on peptide conformation

Two diastereomeric analogues of ring C of nisin incorporating a novel norlanthionine residue have been synthesized via a triply orthogonal protecting group strategy. A full structural study was carried out by NMR, which elucidated the conformational properties of the two peptides and enabled the identity of each diastereoisomer to be proposed.