Biotic Cathode of Graphite Fibre Brush for Improved Application in Microbial Fuel Cells

The biocathode in a microbial fuel cell (MFC) system is a promising and a cheap alternative method to improve cathode reaction performance. This study aims to identify the effect of the electrode combination between non-chemical modified stainless steel (SS) and graphite fibre brush (GFB) for constructing bio-electrodes in an MFC. In this study, the MFC had two chambers, separated by a cation exchange membrane, and underwent a total of four different treatments with different electrode arrangements (anodeǁcathode)—SSǁSS (control), GFBǁSS, GFBǁGFB and SSǁGFB. Both electrodes were heat-treated to improve surface oxidation. On the 20th day of the operation, the GFBǁGFB arrangement generated the highest power density, up to 3.03 W/m³ (177 A/m³), followed by the SSǁGFB (0.0106 W/m³, 0.412 A/m³), the GFBǁSS (0.0283 W/m³, 17.1 A/m³), and the SSǁSS arrangements (0.0069 W/m⁻³, 1.64 A/m³). The GFBǁGFB had the lowest internal resistance (0.2 kΩ), corresponding to the highest power output. The other electrode arrangements, SSǁGFB, GFBǁSS, and SSǁSS, showed very high internal resistance (82 kΩ, 2.1 kΩ and 18 kΩ, respectively) due to the low proton and electron movement activity in the MFC systems. The results show that GFB materials can be used as anode and cathode in a fully biotic MFC system.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

浸没边界-简化热格子Boltzmann方法研究及其应用

针对流固耦合传热问题,本文提出了一种基于浸没边界-简化热格子玻尔兹曼方法(immersed boundary method-simplified thermal lattice Boltzmann method,IB-STLBM)的耦合模型.不同于传统的格子玻尔兹曼方法使用分布函数演化流场和温度场,简化热格子玻尔兹曼方法(simplified thermal lattice Boltzmann method,STLBM)的演化过程不需要依赖分布函数,只涉及平衡态分布函数和非平衡态分布函数,能够直接演化宏观量,极大减小了计算过程中所占用的虚拟内存,简化了边界条件的实现方式,同时具有较高的稳定性.传统的浸没边界法对流场的计算采用欧拉网格,对固体边界采用拉格朗日网格,认为固体边界是对流场产生某种体积力.在应用浸没边界法时,汲取介观的思想,把固体的介入看作是对流场的干扰,打破了固体附近流体介观微团颗粒原始的平衡状态,这种干扰可以看作是在耦合边界上产生的一个非平衡项,可用非平衡态分布函数来表示.基于此,在模型中浸没边界法与简化热格子玻尔兹曼方法更紧密联系在一起,更大程度发挥二者的优点,整个计算过程更加简单直观,符合物理特性.通过对热圆柱绕流和内含热颗粒的封闭方腔自然对流问题的模拟以及对其结果的分析,验证了该算法在求解流固耦合传热问题的有效性和可行性.      

Index for vehicle acoustical comfort inside a passenger car

Sound quality is among the main factors that influence customers’ preference for choosing good automobile products. It all started more than 10 years ago and grows up so fast due to high competition in the automotive industries. A-weighted noise levels and sound power are usually utilised to measure the noise but they are not adequate to characterise the impact sound inside a car. The most popular approach to determine sound quality of a product is to define an annoyance or specific index, which involves both subjective and objective evaluations. Subjective and objective tests should be studied concurrently in order to determine the sound quality inside a passenger car. This approach is used in this paper to evaluate vehicle comfort index according to most frequently used sound quality metrics, namely; Zwicker loudness, sharpness, roughness and fluctuation strength. As a result researchers of different fields of automotive acoustics investigations can use this index according to the type of road (international road roughness) without any need to perform time-consuming jury tests. The metrics are correlated with jury test results that show which of them and how much has affected the acoustical comfort of the vehicle. The relation between road roughness and vehicle acoustical comfort index is another point of interest in this research.     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.     

LDH-intercalated d-gluconate: Generation of a new food additive-inorganic nanohybrid compound

Intercalation of d-gluconate into the interlamellae of zinc-aluminum-layered double hydroxide for the formation of a food additive-inorganic layered nanohybrid was accomplished by both direct (co-precipitation) and indirect (ion-exchange) methods. Powder X-ray diffraction (PXRD) together with CHNS and Fourier transform infrared (FTIR) analyses showed that the hybridization of d-gluconate with pure phase and good crystallinity was successfully accomplished by a direct method within ranges of pH 7.5-10, Zn to Al initial molar ratio of 2-5 and DG concentration of 0.05-0.3 M. The same nanohybrid compound was also prepared using an indirect ion-exchange method by contacting the pre-prepared LDH with 0.1 M DG for 80 min. The basal spacing of the nanohybrid synthesized by the direct method ranged between 9 and 12.0 Å while that synthesized by the indirect ion-exchange method was 14.0 Å. The crystallinity of the latter was higher than the former and it inherited the crystallinity of the precursor. This work shows that a food additive, such as d-gluconate, can be hybridized into an inorganic host for the formation of a new nanohybrid compound, which can be used to regulate the release of acidity in the food industry.     

Composition,properties, and application of products formed in oxidation of polyethylene by nitric acid

Structure of products formed in polyethylene oxidation by nitric acid was studied by NMR, IR, and electronic absorption spectroscopies and derivatography.     

Nickel(II) complexes bearing pyrazolylpyridines: synthesis,structures and ethylene oligomerization reactions

Reactions of 2‐bromo‐6‐(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L1 ) and 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L2 ) with NiCl₂ and NiBr₂ led to the formation of their respective metal complexes [NiCl₂(L1)] ( 1 ), [NiBr₂(L1)] ( 2 ) and [NiBr₂(L2)] ( 3 ) in moderate to high yields. The complexes were characterized using elemental analyses, mass spectrometry and single‐crystal X‐ray diffraction for 2 . The solid‐state structure of 2 confirmed the bidentate coordination mode of L1 and formation of a monometallic compound. Activation of the nickel(II) pre‐catalysts with methylaluminoxane afforded active catalysts in the ethylene oligomerization reaction to produce mainly butenes (84–86%). In contrast, activation of nickel(II) pre‐catalyst 2 with ethylaluminium dichloride resulted in partial Friedel–Crafts alkylation of the toluene solvent by the preformed oligomers. Complex structure, nature of co‐catalyst employed, type of solvent and reaction conditions influenced the catalytic behaviour of these pre‐catalysts. Copyright © 2015 John Wiley & Sons, Ltd.     

Large sample prediction intervals for future geometric mean a comparative study

This paper provides simulation comparisons among the performance of 11 possible prediction intervals for the geometric.mean of a Pareto distribution with parameters (αB, ). Six different procedures were used to obtain these intervals , namely; true inter -val , pivotal interval , maximum likelihood estimation interval, centrallimit teorem interval, variance stabilizing interval and a mixture of the above intervals . Some of these intervals are valid if the observed sample size m,are large , others are valid if both, n and the future sample size m, are large. Some of these intervals require a knowledge of α or B, while others do not. The simulation validation and efficiency study shows that intervals depending on the MLE's are the best. The second best intervalsare those obtained through pivotal methods or variance stabilization transformation. The third group of intervals is that which depends on the central limit theorem when λ is known. There are two intervals which proved to be unacceptable under any criterion.