Effect of tri-potassium phosphate on volumetric,acoustic, and transport behaviour of aqueous solutions of 1-ethyl-3-methylimidazolium bromide at T = (298.15 to 318.15) K

Density, sound velocity, and viscosity of 1-ethyl-3-methylimidazolium bromide, [Emim][Br], in aqueous solutions of tri-potassium phosphate with salt weight fractions (w_s = 0.00, 0.10, 0.15, and 0.20) have been measured as a function of concentration of [Emim][Br] at atmospheric pressure and T = (298.15, 303.15, 308.15, 313.15, and 318.15) K. The apparent molar volume, isentropic compressibility, apparent isentropic compressibility, and relative viscosity values have been evaluated from the experimental data. The partial molar volume and isentropic compressibility at infinite dilution, and viscosity B-coefficient obtained from these data have been used to calculate the corresponding transfer parameters for the studied IL from water to the aqueous tri-potassium phosphate solutions. Also, an empirical equation was satisfactorily used to correlate the experimental viscosity data.     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

Further Studies with Ethyl 5‐Amino‐3‐phenyl‐lH‐pyrazole‐4‐carboxylate1

The newly synthesized ethyl 3‐amino‐5‐phenylpyrazole‐4‐carboxylate 1 was diazotized and coupled with β‐naphthol, active methylene reagents 6 , 9 , 12 , 15 , and the active methine 19 to afford the pyrazolo[5,1‐c]triazines 5 , 8 , 11 , 14 , 17 , 18 , and the pyrazolo[5,1‐ c ]‐1,2,4‐triazoles 21 , 22 , and 23 , respectively. Structures are elucidated and mechanisms are discussed.     

Silica supported nanopalladium prepared by hydrazine reduction

Palladium catalysts (1–10 wt.% Pd) supported on silica were prepared by hydrazine reduction of palladium chloride at room temperature. They were characterized by XRD, TEM, EDX, H₂-adsorption, and H₂-TPD and tested in the gas phase hydrogenation of benzene in the temperature range 75–250 °C. A conventional catalyst (1 wt.% Pd) obtained by calcination then hydrogen reduction of the same metal precursor was studied for comparison. Metal particles with a size range 6.8–28.4 nm were obtained. Dispersion, hydrogen storage and activity in benzene hydrogenation increased with decreasing particle size. In comparison, the classical catalyst was found much more dispersed (mean particle size of 1.6 nm) and more active (specific rate 1.6–3.7 times higher) than the homolog hydrazine catalyst. However, unexpectedly, turnover frequency (TOF) calculations indicated a greater reactivity of the metal surface atoms for the hydrazine catalyst. It also stored more hydrogen. These contrasting results are discussed in relation with the metal particle morphology.     

Structural characteristics and cyclic voltammetric behaviour of Sonogel-Carbon tyrosinase biosensors. A detailed comparative study of three immobilization matrixes

Structural characteristics an cyclic voltammetry of three amperommetric biosensors based on immobilization of tyrosinase on a Sonogel-Carbon electrode for detection of phenols are described. Cyclic voltammetry was applied to study the electrochemical behaviour of the electrode and the electrochemical reaction on the electrode surface. Scanning electron microscopy, X-ray energy dispersive spectroscopy and atomic force microscopy were used for the structure characterization of the electrode surface, enzyme film and polymers coatings. The influence of additive-protective polymers, such as polyethylene glycol and perfluorinated-Nafion ion-exchanger on the surface of the biosensor were explored.     

Recent advances in graphite powder-based electrodes

Graphite powder-based electrodes have the electrochemical performance of quasi-noble metal electrodes with intrinsic advantages related to the possibility of modification to enhance selectivity and their easily renewable surface, with no need for hazardous acids or bases for their cleaning. In contrast with commercial electrodes, for example screen-printed or sputtered-chip electrodes, graphite powder-based electrodes can also be fabricated in any laboratory with the form and characteristics desired. They are also readily modified with advanced materials, with relatively high reproducibility. All these characteristics make them a very interesting option for obtaining a large variety of electrodes to resolve different kinds of analytical problems. This review summarizes the state-of-the-art, advantages, and disadvantages of graphite powder-based electrodes in electrochemical analysis in the 21st century. It includes recent trends in carbon paste electrodes, devoting special attention to the use of emergent materials as new binders and to the development of other composite electrodes. The most recent advances in the use of graphite powder-modified sol–gel electrodes are also described. The development of sonogel–carbon electrodes and their use in electrochemical sensors and biosensors is included. These materials extend the possibilities of applications, especially for industrial technology-transfer purposes, and their development could affect not only electroanalytical green chemistry but other interesting areas also, for example catalysis and energy conversion and storage.     

Synthesis of New Pyrazolo[1.5.4-de]quinoxalines

New pyrazolo[1.5.4-de]quinoxaline derivatives were prepared by the action of 7-aminoindazole 1 on diethyl and dimethyl acetylene dicarboxylates. The structures of the obtained compounds and the direction of cyclization were investigated through a crystallographic study of compound 2. Further alkylation, hydrogenation, and bromination were also explored. The action of potassium thiocyanate on the obtained halo product led to a tetracyclic compound of 1.3-thiazolo[3.4-a]pyrazolo[1.5.4-de]quinoxaline series.     

Colorimetric and Spectrofluorimetric Methods for the Determination of Melatonin in Tablets and Serum

Abstract

Two sensitive and accurate colorimetric and spectrofluonmetric methods, are presented for the determination of melatonin in tablets and serum. The first method utilizes the reactions of p-dimethylaminobenzaldehyde in hydrochloric acid (van Urk reagent)-ferric chloride in sulphuric acid (Salkowski reagent) mixture. The blue color of the resulting reaction product is measured at 630 nm. The second method is based on the reaction of melatonin with o-phthalaldehyde in acid medium which yields highly fluorescent condensation product that is measured at 465 nm as emission wavelength, using excitation wavelength at 355 nm. No interference was observed from tableting additives, and the applicability of the methods was examined by analysing tablets containing melatonin (single and combined with pyridoxine). Mean percentage recoveries from tablets were found to be 99.9+0.31 for single and 100.5+0.15 for combined tablets using colorimetric method, while by applying spectrofluorimetric method the recoveries were found to be 100.610.41 for single and 100.2+0.39 for combined tablets. Furthermore, the proposed methods were extended to the in-vitro determination of melatonin in serum. The detection limits are 0.27 ug ml^?1 for colorimetric method and 0.00035 ug ml^?1 for spectrofluorimetric method.     

Experimental and numerical study of shock wave propagation in water generated by pulsed arc electrohydraulic discharges

The objective of this study is to simulate the propagation of the shock wave in water due to an explosion. The study is part of a global research program on the development of an alternative stimulation technique to conventional hydraulic fracturing in tight gas reservoirs aimed at inducing a distributed state of microcracking of rocks instead of localized fracture. We consider the possibility of increasing the permeability of rocks with dynamic blasts. The blast is a shock wave generated in water by pulsed arc electrohydraulic discharges. The amplitude of these shock waves is prescribed by the electrohydraulic discharges which generate high pressures of several kilobars within microseconds. A simplified method has been used to simulate the injected electrical energy as augmentation of enthalpy in water locally. The finite element code EUROPLEXUS is used to perform fluid fast dynamic computation. The predicted pressure is consistent with the experimental results. In addition, shock wave propagation characteristics predicted with simulation can be valuable reference for design of underwater structural elements and engineering of underwater explosion.