Oxidation of phenol and chlorophenols on platinized titanium anodes in an acidic medium

A comparative study of oxidation of phenol, 3-chlorophenol, 4-chlorophenol, and 2,4-dichlorophenol on Pt/Ti and Ce,Pt/Ti electrocatalysts is performed via cyclic voltammetry. It is shown that the surface morphology and roughness of the anode do not change after modification with cerium. The formal kinetic orders of electrooxidation of all compounds are found to be less than one. It is shown that the β temperature coefficients of the rate of oxidation of chlorophenols grow by 10 to 50% when the Ce,Pt/Ti anode is used at a substrate concentration of 1 mM. A tenfold increase in concentration reduces the effect of cerium additive, except for 3-chlorophenol: the latter exhibits a 250% increase in the β value, compared to the Pt/Ti anode.     

Recent advances in graphite powder-based electrodes

Graphite powder-based electrodes have the electrochemical performance of quasi-noble metal electrodes with intrinsic advantages related to the possibility of modification to enhance selectivity and their easily renewable surface, with no need for hazardous acids or bases for their cleaning. In contrast with commercial electrodes, for example screen-printed or sputtered-chip electrodes, graphite powder-based electrodes can also be fabricated in any laboratory with the form and characteristics desired. They are also readily modified with advanced materials, with relatively high reproducibility. All these characteristics make them a very interesting option for obtaining a large variety of electrodes to resolve different kinds of analytical problems. This review summarizes the state-of-the-art, advantages, and disadvantages of graphite powder-based electrodes in electrochemical analysis in the 21st century. It includes recent trends in carbon paste electrodes, devoting special attention to the use of emergent materials as new binders and to the development of other composite electrodes. The most recent advances in the use of graphite powder-modified sol–gel electrodes are also described. The development of sonogel–carbon electrodes and their use in electrochemical sensors and biosensors is included. These materials extend the possibilities of applications, especially for industrial technology-transfer purposes, and their development could affect not only electroanalytical green chemistry but other interesting areas also, for example catalysis and energy conversion and storage.     

Environmental radioactivity of soils and sediments: Egyptian sector of the Nile valley

The activity concentrations of natural ⁴⁰K, ²³²Th, and ²³⁸U in 89 soil and 84 sediment samples collected over the entire Egyptian Nile River basin including the Nile delta are reported based on the results of epithermal neutron activation analysis. The average activity concentrations of ⁴⁰K, ²³²Th, and ²³⁸U equal to 15.3?±?6.6, 15.6?±?11.1 and 220?±?31 Bq/kg, respectively, are significantly lower than those reported for the Upper Continental Crust, World Average Sediments as well as World Average Soils, suggesting the presence of a considerable portion of mafic material, most probably originating from the Ethiopian High Plateau. Their average activity concentrations are statistically the same in soil and sediments, indicating that the Nile sediments and soil material are of the same origin. The main goal of this study was not only to estimate the radiological hazards but also to show the influence of sedimentary material transportable by the Blue Nile from the Ethiopian High Plateau. The different hazard indices like the radium equivalent, gamma index, external hazard as well as the internal hazard show a low radiological exposure either on direct contact or if local mud bricks are used in the construction of dwellings.     

Silver nanoparticles immobilized onto poly(4‐vinylpyridine)‐functionalized magnetic nanoparticles: A robust magnetically recyclable catalyst for oxidant‐free alcohol dehydrogenation

A heterogeneous and recyclable catalyst with a high loading of silver nanoparticles was synthesized via the silver nanoparticles being supported onto the surface of magnetic nanoparticles coated with poly(4‐vinylpyridine). The synthesized catalyst was used in the dehydrogenation of alcohols to corresponding carbonyl compounds. A broad diversity of alcohols was converted into their corresponding carbonyl compounds in excellent yields. The catalyst was easily recovered by applying an external magnetic field and reused for seven reaction cycles without considerable loss of activity. The catalyst was fully characterized using various techniques.     

The impact of time on the heat resistance of self-compacting high-performance concrete incorporated with recycled martials

The influence of time on the mechanical behavior of concrete after exposure to elevated temperatures has been studied. Twenty-one self-compacting high-performance concrete mixtures with different incorporation amounts of coarse recycled concrete aggregate (RCA) and three unprocessed waste powder materials have been tested at age of 270 days for residual compressive and flexural strength after exposure to fire. The results have been compared to the results for the same concrete, which have been studied at age of 90 days. A new parameter has been introduced for comparing the responses of concrete to elevated temperatures at different ages; this parameter was the “heat resistance” which expresses the total area under the curve of the relative residual strength (compressive or flexural) after exposing to six temperature degrees (20, 150, 300, 500, 600, and 800 °C). The results showed that the age of concrete has an influence on the response of concrete to elevated temperatures. The heat resistance of compressive strength enhanced with age but the concrete behaved with a tendency different to that at the age of 90 days. The heat resistance of flexural strength has not been affected or slightly decreased but not with more than 10% to that at the age of 90 days. The used waste powder materials were unprocessed waste fly ash, waste cellular concrete powder and waste perlite powder; they proved that using any of them up to 15% as a replacement for cement with 0% or 25% of RCA enhanced the concrete resistance for the fire with time. The main two reasons for changing of residual strength with the time were the changing of water content and the proceeding of hydration of the binder. In general, long ages testing properties of concrete simulate the real behavior of concrete structures accurately.

     

Use of capillary electrophoresis for characterisation of vinyl‐terminated Au nanoprisms and nanooctahedra

It is described a simple, rapid and efficient methodology to characterise and separate gold nanoprisms and nanooctahedra by capillary electrophoresis. This technique is suitable to distinguish between morphologies and it can be used as a powerful separation tool after a customised synthesis of both structures. This synthesis was carried out by amending two parameters, temperature and pH, and a sharp decrease was found in nanotriangles when temperature was increased from 70 up to 95°C. However, when the synthesis was performed at a given temperature, an increase in pH did not promote an important change in isolation of any structure until pH = 9.5, critical in the final morphology of the nanoparticle. Gold nanoprisms and nanooctahedra were successfully separated by capillary electrophoresis according to differences in charge‐to‐mass ratio of the morphologies. Final particle morphology was confirmed by transmission electron microscopy analysis. Under optimal working conditions, a mixture containing both shapes of gold nanoparticles was initially injected and two major peaks were obtained for each structure. Capillary electrophoresis allowed to study pH and temperature influence on both morphologies. It was inferred that the ratio between triangles and octahedra decreased to a great extent when increasing both temperature and pH.     

Chemical elements of Algerian Mentha spicata L. used in the treatment of digestive system disorders by employing instrumental neutron activation analysis technique

Journal of Radioanalytical and Nuclear Chemistry - The objectives of this research were to study the elemental concentrations of Mentha spicata L., using a sensitive nuclear analytical technique...     

Novel and sensitive UPLC–MS/MS method for quantification of sofosbuvir in human plasma: application to a bioequivalence study

A novel and sensitive LC–MS/MS method was developed and validated for determination of sofosbuvir (SF) using eplerenone as an internal standard. The Xevo TQD LC–MS/MS was operated under the multiple‐reaction monitoring mode using electrospray ionization. Extraction with tert‐butyl methyl ether was used in sample preparation. The prepared samples were chromatographed on Acquity UPLC BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column by pumping 0.1% formic acid and acetonitrile in an isocratic mode at a flow rate of 0.35 mL/min. Method validation was performed as per the US Food and Drug Administration guidelines and the standard curves were found to be linear in the range of 0.25–3500 ng/mL for SF. The intra‐ and inter‐day precision and accuracy results were within the acceptable limits. A very short run time of 1 min made it possible to analyze more than 500 human plasma samples per day. A very low quantification limit of SF allowed the applicability of the developed method for determination of SF in a bioequivalence study in human volunteers. Copyright © 2016 John Wiley & Sons, Ltd.