Open Chain Chiral Macrolide Building Blocks by Opening of Deoxygenated 1,6-Anhydrosugars with 1,3-Propanedithiol

Chiral building blocks for macrolides and related natural products are obtained from 1,6-anhydrosugars by conversion of the bicyclic acetals 2 or 12 into the open chain chiral 1,3-dithianes 6 and 13. Branched precursors can be obtained by opening of the ?erný epoxide 1 with the 1,3-dithiane anion to yield 7, followed by ring opening with 1,3-propanedithiol to the bis-1,3-dithiane 8.     

Electrochemical behavior of aluminum and some of its alloys in chloroaluminate ionic liquids: electrolytic extraction and electrorefining

The electrochemical behaviors of pure Al, Al–6%Si, Al–3%Cu, and Al–3.7%Cu–0.9%Mg–0.8%Pb–0.6%Fe alloys were investigated in the chloroaluminate ionic liquids 1-butyl-3-methylimidazolium chloride [BMIm]Cl/AlCl₃ (40/60 mol%) and 1-ethyl-3-methylimidazolium chloride [EMIm]Cl/AlCl₃ (40/60 mol%). Electrolytic extraction of copper from Al–Cu alloys in the employed ionic liquids was explored. The alloys were anodically dissolved in the ionic liquids and then pure copper was recovered under potentiostatic conditions. Due to the large difference between the deposition potentials of Cu and Al, pure Cu can be obtained without Al contamination. Electrorefining of Al–3%Cu and Al–6%Si alloys was also investigated in [BMIm]Cl/AlCl₃ (40/60 mol%) at room temperature. High purity aluminum deposits were obtained with significantly low energy consumption of about 2 kWh/kg of Al.     

The low temperature specific heat of Gd-Cu-Y metallic glasses

The specific heat of a series of amorphous aloys of composition Gd_xCu_0.37Y_0.63−x with 0 x 0.63 has been measured in the temperature range 2 to 50 K. A magnetic contribution to the specific heat is apparent in all the samples and has been determined with fair accuracy by subtracting the specific heat of corresponding nonmagnetic amorphous samples prepared with Lu rather than Gd. A qualitative study of the low field ac susceptibility of the magnetic samples has also been made. Samples with less than 35 at% Gd appear to be spin glasses, the results being qualitatively in accord with the predictions of the cluster mean field theory of concentrated spin glasses. As the Gd concentration is increased above 35 at% the samples behave increasingly like ferromagnets. However additional evidence from magnetisation measurements shows that even the sample with the highest concentration of Gd is not a simple ferromagnet.     

Internal surface effects in superlattices in contact with substrate

Using the direct matching procedure and the interface response theory, the effects of the internal surface of a superlattice (i.e., the substrate/superlattice interface) are studied as a function of superlattice parameters while the substrate parameters are kept constant. Surface states are found inside mini-gaps and their localization properties are investigated. The crossings of these states with mini-bands are observed and examined by means of the variational density of states.     

Voltammetric determination of hydroxylamine in water samples using a 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole/carbon nanotube-modified glassy carbon electrode

A modified glassy carbon electrode has been constructed using a 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole along with multiwalled carbon nanotubes. The electrochemical behaviour of modified electrode has been investigated by cyclic voltammetry. Electrocatalytic activity of the modified electrode was investigated for the oxidation of hydroxylamine in 0.1 M phosphate-buffered solution of pH 8. The modified electrode showed electrocatalytic response to the oxidation of hydroxylamine at the potential of 330 mV. The linear range and detection limit for the detection of hydroxylamine in the optimum condition were found to be 4.0?×?10^?7 to 6.75?×?10^?4 M and 28.0?±?1.0 nM, respectively. Finally, the method was employed for the determination of hydroxylamine in water samples.     

Influence of potential function asymmetries on the performance of nonlinear energy harvesters under white noise

To improve the broadband transduction capabilities of vibratory energy harvesters (VEHs) under random and non-stationary excitations, many researchers have resorted to purposefully introducing nonlinearities into the restoring force of the harvester. While performing this task, it is often very challenging to maintain a perfectly symmetric restoring force which yields a VEH with an asymmetric potential energy function. This paper investigates the influence of potential function asymmetries on the performance of nonlinear VEHs under white noise inputs. To that end, a quadratic nonlinearity is introduced into the restoring force and its influence on the mean output power of the harvester for mono- and bi-stable quartic potentials is investigated. It is shown that, for VEHs with a mono-stable quartic potential function, the mean output power increases with the degree of potential function asymmetry. On the other hand, for energy harvesters with a bi-stable quartic potential function, asymmetries in the restoring force appear to worsen performance especially for low to moderate noise intensities. When the noise intensity becomes sufficiently large, the influence of the potential function?s asymmetry on the mean power diminishes. Results also reveal that a VEH with a symmetric bi-stable quartic potential function produces higher mean power levels than the one with the most asymmetric mono-stable potential. As such, it is concluded that a VEH with a symmetric bi-stable potential is most desirable to improve performance under white noise.     

Performance evaluation of a WDM/OCDM based hybrid optical switch utilizing efficient resource allocation

A hybrid optical switch （HOS） with physical layer of wavelength division multiplexing and optical code division multiplexing （WDM/OCDM） scheme is proposed. An additional feature to the HOS than optical cross connect （OXC） is that the controller can process requests for both circuit establishment and burst scheduling. In our study, the measurement criteria of HOS are the blocking probability, probability of error, and probability of outage. To simplify the analysis, no distinction is made between a circuit in progress and a burst in progress. Moreover, a minimum fit （MinF） resource allocation strategy is applied in order to increase the bandwidth efficiency and control the multiplexing interference of the OCDM. A 2D Markov model for the HOS is presented using the MinF strategy. Numerical results reveal that the code parameters and the resource allocation strategy greatly affect the performance. Certain periority can be achieved by assigning shorter codes to high periority users and longer codes to low periority users. Also, the probability of error and outage are reduced bv aonling the MinF strategy.     

Elastic waves at the (0 0 1) and (1 1 0) surfaces of AlN, GaN and InN

We have studied the acoustic waves in the (0 0 1) and (1 1 0) surfaces of AlN, GaN and InN. We have employed the surface Green function matching method and different sets of calculated elastic constants available in the literature for these materials, because no experimental values are available. Important differences are found for the velocities of the bulk and surface acoustic waves coming from these sets of elastic constants, in such a way that they could be easily measured by ultrasonic and Brillouin techniques. These results together with the expressions obtained here for the velocities of the acoustic waves in high symmetry directions could be used to determine the elastic coefficients of these materials.