Preparation of234Th(UX1) by extraction of238U. determination of thorium with arsenazo-III

Summary Radiochemical procedures have been worked out to prepare²³⁴Th(UX₁) with and without carrier from uranium using N-oxide of 4-(5-nonyl)pyridine in sulphuric acid media. This reagent has also been employed in the development of a combined solvent extraction-ion exchange-spectrophotometric method for the determination of thorium in various samples.

---

Zusammenfassung Radiochemische Methoden zur Herstellung von²³⁴Th(UX₁) aus Uran mit und ohne Träger und unter Verwendung von 4-(5-Nonyl)pyridin-N-oxid in schwefelsaurer Lösung wurden ausgearbeitet. Dieses Reagens wurde auch für die Ausarbeitung einer Thoriumbestimmung in verschiedenartigen Proben auf der Grundlage von Extraktion, Ionenaustausch und Spektro-photometrie verwendet.

     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Synthesis of Some Novel 2‐Anilinothiophene, 2,3′‐Bithienyl and Thienylthiopyridine Derivatives Resistance to Penicillium Digitatum Effect the Fruit

Reaction of benzotriazol‐1‐yl acetone 1 with phenyl isothiocyanate followed with α‐chloroacetone or ethyl‐α‐chloroacetate afforded 2‐anilinothiophenes 3 or 4 , respectively. Treatment of 3 with malononitrile at different reaction conditions afforded 6 or 7 . Reaction of 1 with CS₂ in DMF and phenacylbromide afforded S‐alkylated thiophene 10 . Reactions of the latter compound with different active methylene nitriles afforded thienylthiopyridine derivatives 14 and 15 . Condensation of 10 with hydrazine hydrate afforded hydrazon derivative 16 . Reaction of thiophene 17 with formamide in DMF afforded 19 which converted to N‐thienylpyrimidine 20 when treated with malononitrile. The structure of the newly synthesized compounds has been established on the basis of their analytical and spectral data. The compounds were also investigated for antibacterial and antifungal activities.     

Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.     

The absolute stereochemistry of grenadamide

3-(2S-Heptylcycloprop-1S-yl)propanoic acid 2-phenylethanamide was synthesised from cis-cyclopropan-1,2-dimethanol via enzymatic desymmetrisation of the dibutyrate; it gave identical NMR spectroscopic data to those reported for grenadamide but had an equal and opposite absolute rotation, indicating that the latter is the 2R,1R-enantiomer.     

Reactivity of tungsten(0) and molybdenum(0) pentacarbonyl thiobenzoate anions: thiobenzoate as a cis-CO labilizing ligand

The [Et₄N][M(CO)₅SCOPh] complexes (1a, M = Mo; 2a, M = W) have been prepared at ambient temperatures by reacting the photogenerated M(CO)₅ THF intermediate with [Et₄N][SCOPh] in THF. Kinetic studies of the reactions of the anions [M(CO)₅SCOPh]^– with the tri(iso-propyl)phosphite (L) ligand under pseudo-first-order conditions indicate that these reactions are first-order in substrate and are independent of the P(OPr-i)₃ concentration. It is thus envisaged that these CO substitutions proceed via a mechanism which involves initial cis-M—CO bond-breaking, followed by fast attack of the incoming nucleophile on the resulting intermediate to give [cis-M(CO)₄{P(O-Pri)₃}SCOPh]^–. This facile displacement of cis-CO indicates the labilizing nature of the thiobenzoate ligand, most probably by virtue of distal oxygen atom participation. Activation parameters for the reactions are: [M(CO)₅SCOPh]^– + L cis-[M(CO)₄(L)SCOPh]^– + CO M = Mo, H = 24.6(2) kcal mol^–1, S = 8.2(6) eu; M = W, H = 28.4(2) kcal mol^–1, S = 11.3(5) eu. Kinetic data and the mechanism of these ligand-substitutions are discussed.     

Vibrational dynamics of hydrogen‐bonded HCN complexes with OH and NH acids: Computational DFT systematic study

Vibrational properties (band position, infrared [IR], and Raman intensities) of C?N stretching mode were studied in 65 gas phase hydrogen‐bonded 1:1 complexes of HCN with OH acids and NH acids using density functional theory (DFT) calculations at the B3LYP‐6‐311++G(d,p) level. Furthermore, general characteristics of the hydrogen bonds and vibrational changes in acids OH/NH stretching bands were also considered. Experimentally observed blue shift of the C?N stretching band promoted by hydrogen bonding, which shortens the triple bond length, is very well reproduced and quantitatively depends on the hydrogen bond length. Both IR and Raman ν(C?N) band intensities are enhanced, also in good agreement with the experimental results. IR intensity increase is a direct function of the hydrogen bond energy. However, the predicted Raman intensity raise is a more complex function, depending simultaneously on characteristics of both the hydrogen bond (C?N bond length) and the H‐donating acid (polarizability). With these two parameters, ν (C?N) Raman intensities of the complexes are explained with a mean error of ±2.4%. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Compactifications,realcompletions and spectral structures

Summary We give an intrinsic (set theoretical) method to obtain all realcompletions of a Tychonoff space X. It is based on the concept of a spectral structure. Every realcompletion of the space can be obtained as a space of terminal clusters relative to an appropriate spectral structure on X. Various applications of this concept are then given. For example we may characterize those spectral structures which yield the realcompletions between X and X, or which yield spaces that are realcomplete (that is, realcompact), or compact or pseudocompact or Lindelöf. We also determine the class K of compactifications K of X for which X will be real closed in K for every K K.Here we continue the use of the word realcompletion (see [2]) in place of real-compactification. As many investigations have shown and as the present article reinforces, the former is more appropriate than the latter.     

Alkyl (C<Subscript>10</Subscript>, C<Subscript>12</Subscript>, C<Subscript>14</Subscript> and C<Subscript>16</Subscript>) triphenyl phosphonium bromide influenced cloud points of nonionic surfactants (Triton X 100, Brij 56 and Brij 97) and the polymer (Polyvinyl methyl ether)

The clouding points (CP) of the nonionic surfactants p-tert-octyl phenyl polyoxyethylene ether (Triton X 100), Brij-56 and Brij-97, and the water soluble polymer polyvinylmethylether (PVME) have been measured in the presence of the ionic surfactants alkyl (C₁₀, C₁₂, C₁₄ and C₁₆) triphenyl phosphonium bromides (ATPBs). The threshold additive concentrations required for efficient CP enhancement of the systems that were studied have been determined. Considering CP as the threshold state of phase separation, the energetics of the process at different additive concentrations has been evaluated. The spontaneity of free energy of the clouding process (G _c ⁰ ) at the transition concentrations followed the order PVME > TX 100  Bj 56 > Bj 97. The clouding process has been found to be energetically endothermic with fairly large enthalpy and entropy changes that nicely compensate each other. The compensation temperature has been evaluated and compared with different types of the clouding agents.This revised version was published online in January 2005 with corrections to the names of the authors.