Use of capillary electrophoresis for characterisation of vinyl‐terminated Au nanoprisms and nanooctahedra

It is described a simple, rapid and efficient methodology to characterise and separate gold nanoprisms and nanooctahedra by capillary electrophoresis. This technique is suitable to distinguish between morphologies and it can be used as a powerful separation tool after a customised synthesis of both structures. This synthesis was carried out by amending two parameters, temperature and pH, and a sharp decrease was found in nanotriangles when temperature was increased from 70 up to 95°C. However, when the synthesis was performed at a given temperature, an increase in pH did not promote an important change in isolation of any structure until pH = 9.5, critical in the final morphology of the nanoparticle. Gold nanoprisms and nanooctahedra were successfully separated by capillary electrophoresis according to differences in charge‐to‐mass ratio of the morphologies. Final particle morphology was confirmed by transmission electron microscopy analysis. Under optimal working conditions, a mixture containing both shapes of gold nanoparticles was initially injected and two major peaks were obtained for each structure. Capillary electrophoresis allowed to study pH and temperature influence on both morphologies. It was inferred that the ratio between triangles and octahedra decreased to a great extent when increasing both temperature and pH.     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

Electrochemical Characterization of Stainless Steel as a New Electrode Material in a Medical Device for the Diagnosis of Sudomotor Dysfunction

An electrochemical sensor detects the risk of diabetes and prediabetes; low potentials are applied to nickel electrodes and electrical responses are measured. Although the contact of nickel with skin is short, the risk of allergical reactions cannot be discarded. SS 304L, with lower Ni content, was tested in carbonate buffer solutions containing chloride, lactate and urea to investigate its sensitivity to different parameters in sweat and compare it to nickel. The results show that SS 304L is a suitable material for the assessment of sudomotor dysfunction due to its high capacity to detect the deviation in Cl^? concentration. Sensitivity of SS 304L to Cl^? is much higher than for nickel.     

Chemical elements of Algerian Mentha spicata L. used in the treatment of digestive system disorders by employing instrumental neutron activation analysis technique

Journal of Radioanalytical and Nuclear Chemistry - The objectives of this research were to study the elemental concentrations of Mentha spicata L., using a sensitive nuclear analytical technique...     

Novel and sensitive UPLC–MS/MS method for quantification of sofosbuvir in human plasma: application to a bioequivalence study

A novel and sensitive LC–MS/MS method was developed and validated for determination of sofosbuvir (SF) using eplerenone as an internal standard. The Xevo TQD LC–MS/MS was operated under the multiple‐reaction monitoring mode using electrospray ionization. Extraction with tert‐butyl methyl ether was used in sample preparation. The prepared samples were chromatographed on Acquity UPLC BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column by pumping 0.1% formic acid and acetonitrile in an isocratic mode at a flow rate of 0.35 mL/min. Method validation was performed as per the US Food and Drug Administration guidelines and the standard curves were found to be linear in the range of 0.25–3500 ng/mL for SF. The intra‐ and inter‐day precision and accuracy results were within the acceptable limits. A very short run time of 1 min made it possible to analyze more than 500 human plasma samples per day. A very low quantification limit of SF allowed the applicability of the developed method for determination of SF in a bioequivalence study in human volunteers. Copyright © 2016 John Wiley & Sons, Ltd.     

Prescriptive analytics for FIFA World Cup lodging capacity planning

The FIFA World Cup, comprising sixty-four matches spanning an entire month, has, in recent years, been attended by about three million spectators of which over half a million are visitors requiring lodging. Planning lodging capacity for an event of this magnitude is necessary for host nations where pre-existing infrastructures are either inadequate or lacking. This paper develops an optimization analytics framework that sequentially employs two integer programming models for foreign spectator analysis and the consequent lodging requirements. The framework is applied to assess the preparedness of lodging infrastructure in Qatar for FIFA 2022.     

Enhanced process development using automated continuous reactors by self-optimisation algorithms and statistical empirical modelling

Reaction optimisation and understanding is fundamental for process development and is achieved using a variety of techniques. This paper explores the use of self-optimisation and experimental design as a tandem approach to reaction optimisation. A Claisen-Schmidt condensation was optimised using a branch and fit minimising algorithm, with the resulting data being used to fit a response surface model. The model was then applied to find new responses for different metrics, highlighting the most important for process development purposes.     

Synthesis of New Pyrazolo[1.5.4-de]quinoxalines

New pyrazolo[1.5.4-de]quinoxaline derivatives were prepared by the action of 7-aminoindazole 1 on diethyl and dimethyl acetylene dicarboxylates. The structures of the obtained compounds and the direction of cyclization were investigated through a crystallographic study of compound 2. Further alkylation, hydrogenation, and bromination were also explored. The action of potassium thiocyanate on the obtained halo product led to a tetracyclic compound of 1.3-thiazolo[3.4-a]pyrazolo[1.5.4-de]quinoxaline series.     

Synthesis of high-performance superabsorbent glycerol acrylate-cross-linked poly (acrylic acid)

Glycerol acrylate (GA) is synthesised by an acryloylation reaction with acryloyl chloride. An ester was used as a cross-linking agent at varying proportions in the synthesis of poly acrylic acid (PAA). The amount of cross-linking density in the product (GA-PAA) and degree of neutralisation determine the absorbency of the polymer samples. A sample of GA-PAA containing 0.8 % GA was discovered to absorb 395 and 66 g/g of water and saline solution, respectively. Different solvent uptakes were tested with the sample showing varying capacity for different solvents. The temperature of the reaction was maintained at 60 °C and a reaction time of 2½ h. FTIR, TGA, SEM and XRD analyses were used to characterise the products.