Monolithic molecularly imprinted cryogel for lysozyme recognition

The application of molecularly imprinted polymers in the selective adsorption of macromolecules such as proteins by monolithic protein‐imprinted columns requires a macroporous structure, which can be provided by cryogelation at low temperature in which the formation of ice crystals gives a porous structure to the molecularly imprinted polymer. In this study, we applied this technique to synthesize lysozyme‐imprinted polyacrylamide cryogels containing 8% w/v of total monomers and 0.3% w/v of lysozyme. The synthesized cryogel was sponge‐like and elastic with very fast swelling and reshaping properties, showing a swelling ratio of 24.5 ± 3 and gel fraction yield of about 72%. It showed an imprinting effect of 1.58 and a separation factor of 1.37 for cytochrome c as the competing protein. Adsorption studies on the cryogel revealed that it follows the Langmuir isotherm, with a maximum theoretical adsorption capacity of 36.3 mg lysozyme per gram of cryogel. Additionally, it was shown that a salt‐free rebinding solution at low flow rate and pH = 7.0 is favorable for lysozyme rebinding. This kind of monolithic column promises a wide range of application in separation of various biomolecules due to its preparation simplicity, good rebinding characteristics, and macroporosity.     

Light-induced water oxidation by a Ru complex containing a bio-inspired ligand

The new Ru complex 8 containing the bio-inspired ligand 7 was successfully synthesized and characterized. Complex 8 efficiently catalyzes water oxidation using Ce(IV) and Ru(III) as chemical oxidants. More importantly, this complex has a sufficiently low overpotential to utilize ruthenium polypyridyl-type complexes as photosensitizers.     

Engineering and scale-up considerations for microwave induced reactions

Researchers in the area of microwave induced reactions have used many types of hardware, from modified kitchen microwave ovens to commercial generators with waveguide applicators. While in many instances the engineering performance of the hardware is not important in laboratory scale, there are also performance-sensitive experiments. When an experiment becomes successful enough to make one think of scale-ups, then microwave engineering considerations become critical. In this paper figures of merit of microwave systems and applicator configurations are discussed. Prospects for scale-up of microwave chemical reactions are considered by citing recent development in the commercial microwave industry, as well as off-the-shelf equipment. Various large scale applicator configurations are also compared for their possible suitability for inducing reactions.     

Tetrabutylammonium bromide media aza-Michael addition of 1,2,3,6-tetrahydrophthalimide to symmetrical fumaric esters and acrylic esters under solvent-free conditions

The aza-Michael addition of 1,2,3,6-tetrahydrophthalimide with symmetrical fumaric esters has been performed efficiently in a solvent-free system at 100 °C and using 1,4-diazabicyclo[2.2.2]octane (DABCO) as a base in the presence of tetrabutylammonium bromide (TBAB). The products were obtained in good to high yields within 2.5-7.0 h. This reaction worked well on linear alkyl fumarates and was not effective with nonlinear alkyl fumarates. Although the reaction was also applicable to acrylates such as n-butyl acrylate, methacrylates and crotonates were not suitable Michael acceptors for this reaction.     

Investigation of the dose rate dependency of the PAGAT gel dosimeter at low dose rates

Medical physicists need dosimeters such as gel dosimeters capable of determining three-dimensional dose distributions with high spatial resolution. To date, in combination with magnetic resonance imaging (MRI), polyacrylamide gel (PAG) polymers are the most promising gel dosimetry systems. The purpose of this work was to investigate the dose rate dependency of the PAGAT gel dosimeter at low dose rates. The gel dosimeter was used for measurement of the dose distribution around a Cs-137 source from a brachytherapy LDR source to have a range of dose rates from 0.97 Gy h^?1 to 0.06 Gy h^?1. After irradiation of the PAGAT gel, it was observed that the dose measured by gel dosimetry was almost the same at different distances (different dose rates) from the source, although the points nearer the source had been expected to receive greater doses. Therefore, it was suspected that the PAGAT gel is dose rate dependent at low dose rates. To test this further, three other sets of measurements were performed by placing vials containing gel at different distances from a Cs-137 source. In the first two measurements, several plastic vials were exposed to equal doses at different dose rates. An ionization chamber was used to measure the dose rate at each distance. In addition, three TLD chips were simultaneously irradiated in order to verify the dose to each vial. In the third measurement, to test the oxygen diffusion through plastic vials, the experiment was repeated again using plastic vials in a nitrogen box and glass vials. The study indicates that oxygen diffusion through plastic vials for dose rates lower than 2 Gy h^?1 would affect the gel dosimeter response and it is suggested that the plastic vials or (phantoms) in an oxygen free environment or glass vials should be used for the dosimetry of low dose rate sources using PAGAT gel to avoid oxygen diffusion through the vials.     

Static and dynamic stability modeling of a capacitive FGM micro-beam in presence of temperature changes

Stability of a functionally graded (FG) micro-beam, based on modified couple stress theory (MCST), subjected to nonlinear electrostatic pressure and thermal changes regarding convection and radiation, is the main purpose of this paper. It is assumed that the functionally graded beam, made of metal and ceramic, follows the volume fraction definition and law of mixtures, and its properties change as an exponential function through its thickness. By changing the ceramic constituent percent of the bottom surface, five different types of the micro-beams are investigated. The static pull-in voltages in presence of temperature changes are obtained by using step-by-step linearization method (SSLM) and, by adapting Runge–Kutta approach, the dynamic pull-in voltages are obtained numerically. Though the temperature distribution through the thickness of FG micro-beam (due to its too small measurement) is considered uniform, owing to the different thermal expansions of layers, temperature changes cause deflection in the micro-beam, and consequently affect pull-in values. Hence the profound effects of different material constituent over the pull-in voltages are illustrated and it is graphically displayed that how in some cases neglecting components of the couple stress leads to inaccurate results.     

Vibrational analysis of carbon nanotubes using molecular mechanics and artificial neural network

This paper presents the molecular mechanics based finite element modeling of carbon nanotubes (CNTs) and their applications as mass sensors. The beam element with elastic behavior is considered as the bond between the carbon atoms and its properties are obtained using equating continuum and molecular characteristics. The first five natural frequencies of CNTs in cantilever and doubly clamped boundary conditions (BCs) and their corresponding mode shapes are studied in detail. Furthermore, a multilayer perceptron neural network is used to predict the fundamental vibration frequencies of the CNTs with different diameters and lengths. In addition, variations of the natural frequencies of the CNTs with distorted cross sections are investigated. Moreover, the effects of some attached masses with various values on the first three natural frequencies of a considered CNT are studied here.     

Global Convergence Property of Scaled Two-Step BFGS Method

This paper is aimed to extend the scheme of self scaling, appropriate for the quasi-Newton methods, to the two-step quasi-Newton methods. The scaling scheme has been performed during the main approach of updating the current Hessian approximation and prior to the computation of the next quasi-Newton direction whenever necessary. Global convergence property of the new method is explored on uniformly convex functions with the standard Wolfe line search. Preliminary numerical testing has been performed showing that this technique improves the performance of the two-step method substantially.     

A General Strategy for Site‐Directed Enzyme Immobilization by Using NiO Nanoparticle Decorated Mesoporous Silica

Mesoporous materials have recently gained much attention owing to their large surface area, narrow pore size distribution, and superior pore structure. These materials have been demonstrated as excellent solid supports for immobilization of a variety of proteins and enzymes for their potential applications as biocatalysts in the chemical and pharmaceutical industries. However, the lack of efficient and reproducible methods for immobilization has limited the activity and recyclability of these biocatalysts. Furthermore, the biocatalysts are usually not robust owing to their rapid denaturation in bulk solvents. To solve these problems, we designed a novel hybrid material system, mesoporous silica immobilized with NiO nanoparticles (SBA‐NiO), wherein enzyme immobilization is directed to specific sites on the pore surface of the material. This yielded the biocatalytic species with higher activity than free enzyme in solution. These biocatalytic species are recyclable with minimal loss of activity after several cycles, demonstrating an advantage over free enzymes.