Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

Nonlinear resistor based on a polymer-ceramic composition

The resistivity of composite nonlinear resistors (varistors) consisting of zinc oxide ceramic and high-density polyethylene, as well as IR spectra and X-ray diffraction patterns taken of the samples, are studied. The component composition of the resistor is shown to influence its resistivity and IR and X-ray spectra.     

Application of headspace solvent microextraction to the analysis of mononitrotoluenes in waste water samples

The possibility of applying headspace solvent microextraction (HSME) for determination of mononitrotoluenes (MNTs) in waste water samples is demonstrated. A drop of n-amyl alcohol containing naphthalene as an internal standard was suspended from the tip of a microsyringe needle over the headspace of stirred sample solutions for a predescribed extraction period. The drop was then injected directly into a gas chromatograph. Optimization of experimental parameters such as the nature of extracting solvent, microdrop and sample volumes, sampling temperature, stirring rate, ionic strength of the solution, pH and extraction time on HSME efficiency were investigated. Then enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with MNTs. Finally, the method was successfully applied to the extraction and determination of the mononitrotoluenes in waste waters of both P.C.I. Company and Research Center of Azad University.     

Investigation and comparison of biological effects of regioselectively synthesized thiazole derivatives

In this study, anticancer, antibacterial (against hospital-isolated antibiotic-resistant Escherichia coli strains), antifungal, and antioxidant effects of synthesized heterocyclic compounds 5 and 7 containing thiazole core were examined. Cytotoxicity testing was utilized against MCF-7 breast cancer cells via MTT cell viability assay. Antibacterial and antifungal activities were checked out according to Clinical and Laboratory Standards Institute (CLSI) guidelines, and antioxidant properties were evaluated through scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals. Results showed the viability of breast cancer cell lines was reliant on concentration of heterocycles and time of incubation. Synthetic compounds exhibited excellent antibacterial and antifungal properties base on their minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimum fungicidal concentration (MFC) values as well as high antioxidant activities according to their IC₅₀ values. Higher anticancer and antibacterial properties were observed with compound 7; on the contrary, thiazole 5 had better antioxidant effects. They can be introduced as potent antimicrobial, antioxidant, and anticancer agents.     

Numerical study on combustion of H2—O2 in a supersonic reactive expansion in a nozzle

A study on expansion flow inside a nozzle considering full mechanism chemistry of hydrogen and oxygen was carried out. In this study, a full implicit scheme for turbulent reactive flow was obtained by combining the second order TVD scheme of Yee and Harten (1987, Implicit TVD schemes for hyperbolic conservation laws in curvilinear coordinates. American Institute of Aeronautics and Astronautics Journal, 25(2), 266–274) with the efficient implicit lower-upper scheme of Shuen and Yoon (1989, Numerical study of chemically reacting flows using a lower-upper symmetric successive overrelaxation scheme. American Institute of Aeronautics and Astronautics Journal, 27(12), 1752–1756). The species equations, Navier–Stokes equations and turbulence model were implemented in the numerical scheme and solved in conjunction with full detailed finite rate chemistry. The numerical scheme is verified by comparison with experimental results of a converging–diverging nozzle. Effects of inlet pressure, temperature and fuel-oxidant mass ratio on nozzle flow field were studied. Variation of chemical species under different conditions was investigated by considering a chemical mechanism. Results show that increasing inlet pressure increases the rate of reactions due to increasing the concentration of reactants. For lower inlet pressure the radical H increases slightly in the diverging part of the nozzle, while for higher pressures it decreases along the nozzle. Inlet fuel–oxidant mass ratio affects the variation of all species with a greater effect for a near stoichiometric ratio. It was also shown that a higher inlet temperature provides a more enhanced reaction zone in the diverging part of the nozzle.     

Design and fabrication of a Fourier transform spectrometer by means of thermally actuated tunable grating

In this article, the design and fabrication of a Fourier transform spectrometer, based on a thermally actuated tunable grating, are presented. Grooves of a binary grating are filled with nitrobenzene, the refractive index of which highly depends on temperature. Through the application of heat, the temperature of the nitrobenzene is changed, which in turn changes the efficiency of the grating. To measure the spectrum of a light beam, the light under inspection is first passed through the grating and the intensity of the zero order of diffraction is recorded as a function of temperature. Next, the Fourier transform of the measured data is calculated. The resolution of the spectrometer is also discussed. Finally, a micro-spectrometer that is based on a thermally actuated grating is proposed.     

Fabrication of a passive 3D mixer using CO2 laser ablation of PMMA and PDMS moldings

In this article a novel method for the fabrication of a passive 3D mixer is presented. It has been shown that in CO2 laser ablation of Polymethyl Methacrylate (PMMA), bending and straight cone structures can be fabricated by adjusting the laser scanning parameters. The effect of the bending cones in the flow direction of a fluid is discussed with computer simulation and a passive mixer based on such structures is designed. Bending and straight cones are fabricated on a PMMA substrate using CO2 laser ablation technique. The structure is molded with PDMS to make two half-channels with bending and straight cones extending out of the surface. Two PDMS structures are stacked on top of each other with a certain displacement to fabricate the mixer.     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.     

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.     

Direct effect of nanoparticles on the thermal conductivity of CuO-water nanofluid in a phase transition phenomenon using molecular dynamics simulation

Journal of Thermal Analysis and Calorimetry - The thermal behavior of CuO-water nanofluid is examined on an aluminum surface. The dimensions of simulation boxes are...