A new direction in design and manufacture of co-sensitized dye solar cells: Toward concurrent optimization of power conversion efficiency and durability

A novel methodology was implemented in the present study to concurrently control power conversion efficiency (η) and durability (D) of co-sensitized dye solar cells. Applying response surface methodology (RSM) and Desirability Function (DF), the main influential assembling (dye volume ratio and anti-aggregation agent concentration) and operational (performance temperature) parameters were systematically changed to probe their main and interactive effects on the η and D responses. Individual optimization based on RSM elucidated that D can be solely controlled by changing the ratio of vat-based organic photosensitizers, whereas η takes both effects of dye volume ratio and anti-aggregation concentration into account. Among the studied factors, the performance temperature played the most vital role in η and D regulation. In particular, however, multi-objective optimization by DF explored the degree to which one should be careful about manipulation of assembling and operational parameters in the way maximization of performance of a co-sensitized dye solar cell.     

Synthesis of novel fluorene-functionalised nanoporous silica and its luminescence behaviour in acidic media

Fluorene-functionalised nanoporous silica (FL-NH₂-SBA-15) was prepared using the post-synthesis grafting method of SBA-15. The material thus obtained was characterised by means of small- and wide-angle X-ray diffraction, nitrogen adsorption-desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and elemental analysis. The results showed that the organised structure is preserved after the post-grafting procedure. Surface area and pore-size decreased by attaching functional groups to the pore surface. In addition, the pore volume was reduced with functionalisation. The amount of fluorene grafted onto the surface of SBA-15 was 0.55 mmol with a yield of approximately 46 %. The emission spectra of FL-NH₂-SBA-15 in acidic media were studied and are discussed in detail. The structural change between FL-NH₂-SBA-15 and the protonated form might be an effective candidate for acid-dependent molecular-sensor models for advanced application in molecular sensors in the future.     

Forward scattering theory of electric-field-gradient-induced birefringence

We attempt to resolve the discrepancy between the Buckingham—Longuet-Higgins (BLH) and Imrie—Raab (IR) theories of linear birefringence induced in a gas of dipolar molecules by an electric field gradient. To this end we present a new calculation of the effect, based on forward scattering of a light beam incident on a thin lamina of gas molecules. We work to electric quadrupole—magnetic dipole order. The beam undergoes a time delay which is proportional to the thickness of the lamina and the electric field gradient, and can therefore be interpreted in terms of a contribution to the refractive index of the gas due to the field gradient. The birefringence is obtained by considering appropriate polarizations of the incident beam. To avoid the occurrence of a divergent quantity, such as appears in the BLH theory, it is essential to take account of the finite beam width. Calculations are performed using both primitive (traced) and traceless molecular quadrupole moments; as required on basic grounds, these results are equivalent. They are also identical to the BLH result. By contrast, the IR result is physically unacceptable because it is not invariant with respect to the use of traced and traceless moments. The source of error in the IR theory remains unclear.     

Separation of Cd(II) and Ni(II) ions by supported liquid membrane using D2EHPA/M2EHPA as mobile carrier

The separation of Cd(II) and Ni(II) ions was studied in an aqueous sulphate medium using supported liquid membrane (SLM). D2EHPA/M2EHPA was used as a mobile carrier, microporous hydrophobic PTFE film was used as a solid support for the liquid membrane, and the strip phase was sulphuric acid. The effects of different parameters such as feed concentration, carrier concentration, feed phase pH, and strip phase pH on the separation factor and flux of Cd(II) and Ni(II) ions were studied. The optimum values obtained to achieve the maximum flux were 5.0 for feed pH, 40 vol. % for D2EHPA/M2EHPA concentration in the membrane phase, 0.5 for strip pH, and 0.012 mass % for feed concentration. Under these optimum conditions, the flux values of Cd(II) and Ni(II) were 15.7 × 10^?7 kg m^?2 s^?1 and 2.6 × 10^?7 kg m^?2 s^?1, respectively. The separation factors of Cd(II) over Ni(II) were studied under different experimental conditions. At a carrier concentration of 10 vol. % and feed concentration of 0.012 mass %, the maximum value of 185.1 was obtained for the separation factor of Cd(II) over Ni(II). After 24 h, the percentages of the extracted Cd(II) and Ni(II) were 83.3 % and 0.45 %, respectively.     

Fabrication and characterization of highly crystalline mordenite membranes on α-alumina disks via a seeded in situ template-free hydrothermal treatment

A template-free seeded short-time in situ hydrothermal treatment was carried out in a brass autoclave to synthesize crystalline mordenite (MOR) membranes on alumina-silicate disk supports with micro-scale pores. According to XRD analysis, MOR was the only zeolitic material present in the membrane layers on the supports. SEM examination of the membranes showed three different layers of the membrane thickness: (i) support sub-layer, (ii) mix penetrated mid-layer, the MOR crystals filling the pores among the support (about 4–5 μm), and (iii) MOR top-layer (about 4–5 μm). The crystalline bonds between MOR crystals of the membrane top-layer and the crystals of the support were clearly observed within the mid-layer. The continuous top-layer of zeolitic membrane was formed by many large and well-shaped crystals. The seeding treatment significantly enhanced the formation of MOR crystals onto the surface of the supports. EDAX analysis showed a Si/Al ratio of 6.8 for the MOR layer of the membrane. Due to their hydrophilic natures, the polycrystalline MOR membranes were found to be selective for continuous dehydration of different EtOH–water mixtures through an adsorption–diffusion–desorption mechanism. Both total permeation flux and separation factor of the membrane were found to increase by increasing temperature and water concentration of feed. The continuity and high crystallinity of the membrane top-layer led to the fairly high dehydration of EtOH. It was found that there was no pinhole within the layer and the morphology of the membrane was almost defect-free.     

Characterization of Mazuj galls of Quercus infectoria tree as green corrosion and scale inhibitor for effective treatment of cooling water systems

Research on Chemical Intermediates - The corrosion and scale inhibition efficiency of Mazuj gall extract in simulated cooling water has been evaluated. Potentiodynamic polarization, electrochemical...     

In Vitro Evaluation of Zn–Norfloxacin Complex as a Potent Cytotoxic and Antibacterial Agent, Proposed Model for DNA Binding

A tetrahedral Zn(II) complex with the second generation fluoroquinolone, norfloxacin, was prepared and characterized (NOR–Zn complex, NZC). The antibacterial efficiency of the NZC was tested on two Gram-positive and four Gram-negative bacteria by minimum inhibitory concentration method. The cytotoxic potential of NZC on MDA (human breast adenocarcinoma), Caco-2 (human colon adenocarcinoma), and Hela (human cervix carcinoma) cell lines was studied. The DNA interaction property of the NZC has been investigated using UV–vis, fluorescence, Fourier transform infrared, as well as cyclic voltammetry methods. Intrinsic binding constant (K _b ), thermodynamic, and other spectroscopic and voltammetric data indicate that the NZC has more affinity for DNA than for norfloxacin and interacted with DNA via two modes: electrostatic and outside hydrogen binding. The proposed DNA binding mode supports the large enhancement in the cytotoxicity and antibacterial activity of NZC.     

On the theory of the Buckingham effect

We apply general arguments (based on spatial transformation properties, intrinsic symmetry and dimensional analysis) to the theory of the Buckingham effect (electric-field–gradient-induced birefringence in a gas). These yield, in a simple manner, the temperature-dependent and temperature-independent terms in the birefringence (each to within a numerical factor), and also the expression, derived by Buckingham and Longuet-Higgins, for the effective quadrupole centre of a molecule. We show in addition how the calculation of the two numerical factors can be simplified in our approach.