Suppressing shape instabilities to discover the Bjerknes force instability (L)

For sufficiently strong acoustic forcing in a standing wave field, subresonant size bubbles are predicted to be repelled from the pressure antinode. Single bubble sonoluminescence (SBSL) conditions in water do not allow the observation of this instability. This study investigates the possibility that increasing the viscosity of the host liquid can preferentially suppress shape instabilities of a bubble and allow SBSL experiments to be limited by the Bjerknes force instability.     

Time-stretch oscilloscope with dual-channel differential detection front end for monitoring of 100 Gb/s return-to-zero differential quadrature phase-shift keying data

Optical performance monitoring of high-capacity networks is one of the enabling technologies of future reconfigurable optical switch networks. In such networks, rapid performance evaluation of data streams becomes challenging due to the use of advanced modulation formats and high data rates. The time-stretch enhanced recording oscilloscope offers a potential solution to monitoring high-rate data in a practical time scale. Here we demonstrate an architecture with a differential detection front end for simultaneous I/Q data monitoring of a 100 gigabits/s return-to-zero differential quadrature phase-shift keying signal. This demonstration shows the potential of this technology for rapid performance monitoring of high-rate optical data streams that employ advanced modulation formats.     

Photonic temporal integration of broadband intensity waveforms over long operation time windows

We propose and experimentally demonstrate a novel design for temporal integration of microwave and optical intensity waveforms with combined high processing speed and a long operation time window. It is based on concatenating in series a discrete-time (low-speed) photonic integrator and a high-speed analog time-limited intensity integrator. This scheme is demonstrated here using a cascaded fiber-based interferometers' system (as a passive eight-point discrete-time integrator) and an analog time-limited intensity integrator. The latter is based on temporal intensity modulation of the input waveform with a rectangular-like incoherent energy spectrum followed by linear dispersion. Using this setup, we experimentally achieve accurate time integration of intensity signals with ~36 GHz bandwidths over an operation time window of ~4 ns, corresponding to a processing time-bandwidth product of >144.     

Ultrasound-induced membrane lipid peroxidation and cell damage of Escherichia coli in the presence of non-woven TiO2 fabrics

A non-woven titanium dioxide (TiO₂) fabric was applied to disinfection by ultrasound (US) irradiation, and the disinfection efficiency and lipid peroxidation of Escherichia coli (E. coli) cell membrane were evaluated to investigate the killing process. The addition of non-woven TiO₂ fabric enhanced hydroxyl (OH) radical generation and disinfection efficiency. Judging from the disinfection experiments using glutathione or t-butanol as a radical scavenger, the OH radical played a major role in cell killing in sonodynamic disinfection with non-woven TiO₂ fabric. Moreover, to understand the detailed killing process, damage to cell membrane was also evaluated using a diphenyl-1-pyrenylphosphine (DPPP) fluorescent probe, which detects the membrane’s lipid peroxidation. The addition of non-woven TiO₂ fabric aggravated this peroxidation. This aggravation was caused by the OH radical according to an assay using a radical scavenger. From these results, it was concluded that non-woven TiO₂ fabric as a sonocatalyst promoted peroxidation of the polyunsaturated phospholipid component of the lipid membrane initially and induced a major disorder in the E. coli cell membrane under US irradiation.     

Highly confined hybrid spoof surface plasmons in ultrathin metal-dielectric heterostructures

Highly confined "spoof" surface plasmons (SSPs) are theoretically predicted to exist in a perforated metal film coated with a thin dielectric layer. Strong modes confinement results from the additional waveguiding by the layer. Spectral characteristics, field distribution, and lifetime of these SSPs are tunable by the holes' size and shape. SSPs exist both above and below the light line, offering two classes of applications: "perfect" far-field absorption and efficient emission into guided modes. It is experimentally shown that these plasmonlike modes can turn thin, weakly absorbing semiconductor films into perfect absorbers.     

Magnetic properties of nanostructured MnZn ferrite

Mn_0.5Zn_0.5Fe₂O₄ nanoparticles (10-30 nm) have been prepared via mechanochemical processing, using a mixture of two single-phase ferrites, MnFe₂O₄ and ZnFe₂O₄. SQUID measurements (field-cooled magnetization curves and hysteresis loops) were performed to follow the mechanically induced evolution of the MnFe₂O₄/ZnFe₂O₄ mixture submitted to the high-energy milling process. The resulting single MnZn nanoferrite phase was characterized by SQUID (M-H curve), Faraday balance (M-T curve) and transmission electron microscopy. The magnetic characteristics of the mechanosynthesized material were compared with those of bulk Mn_0.5Zn_0.5Fe₂O₄. It was found that the saturation magnetization of nanostructured Mn_0.5Zn_0.5Fe₂O₄ (87.2 emu/g) is lower than that of the bulk Mn_0.5Zn_0.5Fe₂O₄, but, the Néel temperature of the sample (583 K) is higher than that of the bulk Mn_0.5Zn_0.5Fe₂O₄.     

Acid-induced gelation behavior of sonicated casein solutions

Casein gels were made from solutions sonicated by 24 and 130 kHz ultrasounds for 0, 60 and 120 min, followed by acidification with glucono-δ-lactone at 30 °C. The dynamics of gel formation were studied using rheological methods and microstructure of gels was monitored using scanning electron microscopy. Sonication postponed the gelation point to a lower pH value and increased the elasticity of freshly formed gels. It also resulted in gels with a more interconnected structure and smaller non-distinguishable particulates. This structure was especially dominant for the gel made from the solution already sonicated for 120 min.     

Toward a practical and waste-free synthesis of thioureas in water

An operationally simple and entirely green protocol for the synthesis of thiourea derivatives by the reaction of carbon disulfide with primary amines in pure water is developed. This reaction is a highly atom-economic process for production of highly pure, hindered thioureas without any catalyst and tedious work-up.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Effects of Cs treatment on field emission properties of capped carbon nanotubes

Within the methodology [M. Khazaei, A.A. Farajian, Y. Kawazoe, Phys. Rev. Lett. 95 (2005) 177602] based on first-principles electronic structure calculations, the effects of Cs treatment on current emissions and emission patterns of capped carbon nanotubes are considered at low deposition densities when the nanotubes are under an electric field 0.2 V/Å. The results show that the current emission from the cap with one adsorbed Cs is 3.4 times larger than the cap without any Cs. It is 9.6 times larger in the cap with two adsorbed Cs atoms. After Cs deposition the emission patterns become asymmetric (current emission from the carbon atoms located at the topmost pentagon ring close to Cs atoms is larger than the other atomic sites). There are very few localized states on Cs atoms. Hence, although the tunneling probability of electron emission from Cs atoms is significant, there is no current from Cs atoms. In addition, the effect of Cs on work function reduction of nanotubes is explained in terms of Cs deposition densities and the surface dipole moments.