The numerical and experimental study of photon diffusion inside biological tissue using boundary integral method

In this study, the diffusion of photons in turbid media, like biological tissue has been studied. Due to scattering and absorption of photons in such media, the study of photon propagation in biological tissue is complicated. The several numerical methods have been presented to simulate the behavior of diffused photons. Recently, Boundary Integral Method (BIM) has been offered to simulate photon migration inside biological tissues. This method has advantage, e.g. lower computational time in compared with other numerical methods. In this study, the accuracy and precision of BIM compares with another numerical method like Monte Carlo technique and finite difference method, and also the calculated results obtained by BIM and Monte Carlo method evaluate with measured results. Furthermore, the effects of scattering and absorption coefficient of tissue on the measured signal are studied.     

Superprism properties in 2D polymer photonic crystals at high normal frequencies

The superprism effects of higher bands, i.e., for normal frequencies of higher than one, in two-dimensional (2D) polymer photonic crystals (PCs) are investigated. It is shown that in a polymer PC of triangular symmetry with filling factor of about 31%, the gradual transition of the hexagonal into triangular equi-frequency dispersion contours leads to a strong superprism in the 6th band at a normal frequency of 1.2. This dispersion is more prominent than those observed in the lower bands in 2D PCs. Also, this requires a lattice constant longer than the concerned wavelength. Furthermore, in a 2D polymer PC with a filling factor of about 83% a strong discontinuous superprism effect occurs at normal frequencies higher than one, which is due to an abrupt transition between two modes with the refraction angles of opposite signs. The effect can be exploited for switching applications as demonstrated in the paper.     

Influences of substrate temperature on microstructure and corrosion behavior of APS Ni_(50)Ti_(25)Al_(25) inter-metallic coating

In the present investigation, Ni_(50)Ti_(25)Al_(25)(at.%) mechanically alloyed powder is deposited on carbon steel substrate.Before the coating process, the substrate is heated to temperature ranging from room temperature to 400℃. The microstructure, porosity, microhardness, adhesion strength, and corrosion behavior of the coating are investigated at different substrate temperatures. Results show that coating porosity is lower on high temperature surface. Microhardness and adhesion strength of the deposition layer on the substrate without preheating have lower values than with preheating. The polarization test result shows that corrosion performance of the coating is dependent on micro cracks and porosities and the increasing of substrate temperature can improve the quality of coating and corrosion performance.     

The effect of anodising time on the electrochemical behaviour of the Ti/TiO<Subscript>2</Subscript> NTs/IrO<Subscript>2</Subscript>-RuO<Subscript>2</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> anode

Nowadays, mixed metal oxide (MMO) anodes are a superior alternative to lead alloys in electrowinning processes. Passivation of titanium substrate is the most common mechanism of deactivation in these anodes. In this research, titanium oxide nanotubes have been utilised as an interlayer between the substrate and a mixed metal oxide coating in order to improve the anode electrochemical behaviour and life via retardation of titanium passivation. Anodising of the substrate was done in 0.5 wt% hydrofluoric acid for 30, 60 and 240 min. The samples were subsequently coated with a coating composed of IrO₂-RuO₂-Ta₂O₅. The microstructure of different samples was observed by scanning with an electron microscope, and the electrochemical behaviour of the samples was studied by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. The studies showed that formation of titanium oxide nanotubes with anodising times of 60 and 240 min increases the life of the anode through the provision of a compact coating. The life of the anode which was anodised for 240 min lasted about 20% longer than the sample which had a substrate without any anodised layer.     

Carpet oscillator: A new megastable nonlinear oscillator with infinite islands of self-excited and hidden attractors

Polarisation of the particle spin can be an important problem for different plasmas. In this article, the contribution of the electron spin on the growth rate of the temperature anisotropy of electromagnetic instabilities has been investigated. Results show that polarisation of the electron spin will restrict the instability growth rate while instability can survive due to the spin-depolarised electrons even when the requested temperature anisotropy is vanished. Instability can reach the damping state exponentially due to the spin-polarised electrons while it can grow linearly due to the spin-depolarised (the semi-classical) electrons.     

Shedding light on the structure of a photoinduced transient excimer by time-resolved diffraction

Time-resolved single-crystal diffraction performed with synchrotron radiation shows that the 53(1) micros phosphorescent state, generated in the crystalline phase of trimeric {[3,5-(CF3)(2)Pyrazolate]Cu}(3) molecules by exposure to 355 nm of light at 17 K, is due to the formation of an excimer rather than the shortening of the intramolecular Cu...Cu distances within the trimeric units, or the formation of a continuous chain of interacting molecules. One of the intermolecular Cu...Cu distances contracts by 0.56 Angstroms from 4.018(1) to 3.46(1) Angstroms;, whereas the interplanar spacing of the trimers is reduced by 0.65 Angstroms; from 3.952(1) to 3.33(1) Angstroms. Density-functional theory calculations support the formation of a Cu...Cu bond through the intermetallic transfer of a Cu 3d electron to a molecular orbital with a large 4p contribution on the reacting Cu atoms.     

Localization of elastic waves in heterogeneous media with off-diagonal disorder and long-range correlations

Using the Martin-Siggia-Rose method, we study propagation of acoustic waves in strongly heterogeneous media which are characterized by a broad distribution of the elastic constants. Gaussian-white distributed elastic constants, as well as those with long-range correlations with nondecaying power-law correlation functions, are considered. The study is motivated in part by a recent discovery that the elastic moduli of rock at large length scales may be characterized by long-range power-law correlation functions. Depending on the disorder, the renormalization group (RG) flows exhibit a transition to localized regime in any dimension. We have numerically checked the RG results using the transfer-matrix method and direct numerical simulations for one- and two-dimensional systems, respectively.     

Novel model of FM-noise conversion in a UMZI using RF external phase modulation of lasers: Theoretical and experimental results

In this paper, we propose and demonstrate a new and original model for theoretical calculation and experimental measurement of the noise power spectral density (NPSD) in phase-modulated optical links. The phase modulation is operated in the RF frequency range by an external phase modulator. The NPSD is derived for the first time in interferometric systems, by considering all effects such as the 1/f FM noise of the laser and white noise applied to light from a 1550 nm DFB laser, with phase modulation. The results show for the first time the influence of the phase modulation index, modulation frequency and interferometric delay in the phase-to-intensity noise conversion. The experimental and simulation results of conversion of FM-noise to intensity noise in an optical link by considering the external RF phase modulation are shown with good agreement.     

Ultrasound-assisted photochemical oxidation of unsymmetrically substituted 1,4-dihydropyridines

The combination of ultrasound and photochemistry has been used for the oxidation of unsymmetrical 1,4-dihydropyridines to the pyridine derivatives. An ultrasonic probe of 24 kHz frequency and a Hg-lamp of 100 W have been used for this study. The effect of parameters such as ultrasonic intensity, the presence of oxygen and argon atmospheres and also the separate usage of one of these irradiation sources have been studied. Whereas sonication of these compounds alone did not result in the oxidation of them, the use of ultrasound increases the rate of photo-oxidation. The presence of oxygen decreases or increases the rate of reaction, depending on the type of excited state of 1,4-dihydropyridines involved in the reaction.     

Influence of ultrasound on cadmium ion removal by sorption process

This study presents the removal of Cd(II) from aqueous solution by the sorption process in the presence (sono-sorption) and absence (conventional method) of ultrasound. Batch experiments were conducted to study the main parameters such as sorbate concentration, amount of sorbent, contact time, and ultrasound intensity. In addition, the sorbate/sorbent concentration ratios were studied in two different ways: (a) in a constant sorbate concentration and variable amount of sorbent, (b) in a constant amount of sorbent and variable sorbate concentration. The results indicated that under proper conditions, there was a possibility to remove cadmium ion very fast and efficiently from aqueous solution. In addition, the intensity of ultrasound and the sorbate/sorbent concentration ratio were two important factors for the removal of this pollutant and therefore, this study was focused mostly on these two variables.