Effect of frequency on sonochemical reactions. I: Oxidation of iodide

The effect of continuous sonication on the kinetics of iodine formation in aqueous iodide solutions was studied in the presence of air and argon at two frequencies, 20 and 900 kHz. Most workers in this area assume that frequency has a negligible effect on sonochemical reactions. The present results indicate, however, that there is a significant effect in the above solutions. The rate of sonochemical oxidation of iodide in aqueous solution is 3.1 times greater in presence of air than argon at 900 kHz, in contrast to the situation at 20 kHz, where the ratio is 0.9 A 900 kHz apparatus was specially designed to make it possible to measure the absolute acoustic power delivered into the solution. The rate of oxidation per unit power in this new 900 kHz apparatus can be more than 30 times greater than that at 20 kHz for the oxidation of iodide in the presence of air.     

Preparation,surface state and band structure studies of SrTi(1 − x)Fe(x)O(3 − δ) (x = 0–1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy

In this report, SrTi_(1 ? x)Fe_(x)O_(3 ? δ) photocatalyst powder was synthesized by a high temperature solid state reaction method. The morphology, crystalline structures of obtained samples, was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscopy (TEM), respectively. The electronic properties and local structure of the perovskite STF_x (0 ≤ x ≤ 1) systems have been probed by extended X-ray absorption fine structure (EXAFS) spectroscopy. The effects of iron doping level x (x = 0–1) on the crystal structure and chemical state of the STF_x have been investigated by X-ray photoelectron spectroscopy and the valence band edges for electronic band gaps were obtained for STF_x by ultraviolet photoelectron spectroscopy (UPS). A single cubic perovskite phase of STF_x oxide was successfully obtained at 1200 °C for 24 h by the solid state reaction method. The XPS results showed that the iron present in the STF_x perovskite structure is composed of a mixture of Fe³⁺ and Fe⁴⁺ (SrTi_(1 ? x)[Fe³⁺, Fe⁴⁺]_(x)O_(3 ? δ)). When the content x of iron doping was increased, the amount of Fe³⁺ and Fe⁴⁺ increased significantly and the oxygen lattice decreased on the surface of STF_x oxide. The UPS data has confirmed that with more substitution of iron, the position of the valence band decreased.     

Sensitive determination of adenosine disodium triphosphate in soil,milk, and pharmaceutical formulation by enoxacin–europium (III) fluorescence complex in solution

A new spectroflurometric method for the determination of adenosine disodium triphosphate (ATP) is developed. Fluorometric interaction between ATP and enoxacin (ENX)–Eu³⁺ complex was studied using UV–vis and fluorescence spectroscopy. Weak luminescence spectra of Eu³⁺ were enhanced after complexation with ENX at 589 nm and 614 nm upon excitation at 395 nm due to energy transfer from the ligand to the lanthanide ion. It was observed that luminescence spectrum of Eu³⁺ was strongly enhanced further at 614 nm after incorporation of ATP into the ENX–Eu³⁺ complex. Under optimal conditions, the enhancement of luminescence at 614 nm was responded linearly with the concentration of ATP. The linearity was maintained in the range of 1.5×10^?10–1.15×10^?8 M (R=0.9973) with the limit of detection (3σ) of 4.71×10^?11 M. The relative standard deviation (RSD) for 9 repeated measurements of 1×10^?9  M ATP was 1.25%. Successful determinations of ATP in soil, milk, and a pharmaceutical formulation with the proposed method were demonstrated.     

The effect of anodising time on the electrochemical behaviour of the Ti/TiO<Subscript>2</Subscript> NTs/IrO<Subscript>2</Subscript>-RuO<Subscript>2</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> anode

Nowadays, mixed metal oxide (MMO) anodes are a superior alternative to lead alloys in electrowinning processes. Passivation of titanium substrate is the most common mechanism of deactivation in these anodes. In this research, titanium oxide nanotubes have been utilised as an interlayer between the substrate and a mixed metal oxide coating in order to improve the anode electrochemical behaviour and life via retardation of titanium passivation. Anodising of the substrate was done in 0.5 wt% hydrofluoric acid for 30, 60 and 240 min. The samples were subsequently coated with a coating composed of IrO₂-RuO₂-Ta₂O₅. The microstructure of different samples was observed by scanning with an electron microscope, and the electrochemical behaviour of the samples was studied by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. The studies showed that formation of titanium oxide nanotubes with anodising times of 60 and 240 min increases the life of the anode through the provision of a compact coating. The life of the anode which was anodised for 240 min lasted about 20% longer than the sample which had a substrate without any anodised layer.     

Shedding light on the structure of a photoinduced transient excimer by time-resolved diffraction

Time-resolved single-crystal diffraction performed with synchrotron radiation shows that the 53(1) micros phosphorescent state, generated in the crystalline phase of trimeric {[3,5-(CF3)(2)Pyrazolate]Cu}(3) molecules by exposure to 355 nm of light at 17 K, is due to the formation of an excimer rather than the shortening of the intramolecular Cu...Cu distances within the trimeric units, or the formation of a continuous chain of interacting molecules. One of the intermolecular Cu...Cu distances contracts by 0.56 Angstroms from 4.018(1) to 3.46(1) Angstroms;, whereas the interplanar spacing of the trimers is reduced by 0.65 Angstroms; from 3.952(1) to 3.33(1) Angstroms. Density-functional theory calculations support the formation of a Cu...Cu bond through the intermetallic transfer of a Cu 3d electron to a molecular orbital with a large 4p contribution on the reacting Cu atoms.     

Influence of ultrasound on cadmium ion removal by sorption process

This study presents the removal of Cd(II) from aqueous solution by the sorption process in the presence (sono-sorption) and absence (conventional method) of ultrasound. Batch experiments were conducted to study the main parameters such as sorbate concentration, amount of sorbent, contact time, and ultrasound intensity. In addition, the sorbate/sorbent concentration ratios were studied in two different ways: (a) in a constant sorbate concentration and variable amount of sorbent, (b) in a constant amount of sorbent and variable sorbate concentration. The results indicated that under proper conditions, there was a possibility to remove cadmium ion very fast and efficiently from aqueous solution. In addition, the intensity of ultrasound and the sorbate/sorbent concentration ratio were two important factors for the removal of this pollutant and therefore, this study was focused mostly on these two variables.     

Continuous-wave mid-infrared frequency conversion in silicon nanowaveguides

We report the first demonstration of cw wavelength conversion from the telecommunications band to the mid-IR (MIR) region via four-wave mixing in silicon nanowaveguides. We measure a parametric bandwidth of 748 nm by converting a 1636 nm signal to produce a 2384 nm idler and show continuously tunable wavelength conversion from 1792 to 2116 nm. This report indicates that the advantages of silicon photonics may be leveraged to create devices for a large range of MIR applications that require cw operation.     

Suppressing shape instabilities to discover the Bjerknes force instability (L)

For sufficiently strong acoustic forcing in a standing wave field, subresonant size bubbles are predicted to be repelled from the pressure antinode. Single bubble sonoluminescence (SBSL) conditions in water do not allow the observation of this instability. This study investigates the possibility that increasing the viscosity of the host liquid can preferentially suppress shape instabilities of a bubble and allow SBSL experiments to be limited by the Bjerknes force instability.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Markov Properties of Electrical Discharge Current Fluctuations in Plasma

Using the Markovian method, we study the stochastic nature of electrical discharge current fluctuations in the Helium plasma. Sinusoidal trends are extracted from the data set by the Fourier-Detrended Fluctuation analysis and consequently cleaned data is retrieved. We determine the Markov time scale of the detrended data set by using likelihood analysis. We also estimate the Kramers-Moyal’s coefficients of the discharge current fluctuations and derive the corresponding Fokker-Planck equation. In addition, the obtained Langevin equation enables us to reconstruct discharge time series with similar statistical properties compared with the observed in the experiment. We also provide an exact decomposition of temporal correlation function by using Kramers-Moyal’s coefficients. We show that for the stationary time series, the two point temporal correlation function has an exponential decaying behavior with a characteristic correlation time scale. Our results confirm that, there is no definite relation between correlation and Markov time scales. However both of them behave as monotonic increasing function of discharge current intensity. Finally to complete our analysis, the multifractal behavior of reconstructed time series using its Keramers-Moyal’s coefficients and original data set are investigated. Extended self similarity analysis demonstrates that fluctuations in our experimental setup deviates from Kolmogorov (K41) theory for fully developed turbulence regime.