The use of Nafion-H® as an efficient catalyst for the direct conversion of primary and secondary trimethylsilyl ethers to their corresponding ethers under mild and heterogeneous conditions

Primary and secondary trimethylsilyl ethers were converted to their corresponding ethers in the presence Nafion-H® with good to excellent yields under mild and heterogeneous conditions.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Low molecular weight organogels based on long-chain carbamates

Thermoreversible organogels were prepared from carbamates with alkyl side chains of different lengths. Gelation was possible only up to an alkyl side chain length of 12 carbons, beyond which crystallization occurs, due to the dominant van der Waals interaction between the alkyl chains. This is in contrast to other alkane-based organogels, in which gelating efficiency increased with the length of the alkane chain (see Abdallah, D. J.; Weiss, R. G. Adv. Mater. 2000, 12, 1237). The critical concentration for gelation decreases drastically with an increase in the side chain length. Xerogels of these show birefringent fibers with uniform cross section and unlimited growth in one direction. The extent of this unlimited growth is affected by the length of the alkyl side chain in the carbamate, which finally ceases the gel formation ability of the carbamate. Cryogenic scanning electron microscopy images of the gels are similar to those of xerogels. From X-ray diffraction of the fibers, we propose that the growth direction is along the plane of hydrogen bonds between the carbamate molecules. The thickness of the fibers depends on the length of the alkyl side chain. Morphological differences are seen between gels prepared by slow cooling and quenching of the solution. Thus, the morphology of the fibrous xerogels of the carbamates can be tailored for specific applications, by the choice of the alkyl side chain length and the rate of cooling the solution.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

Use of a Water-in-Oil Microemulsion as Mobile Phase in Complexation TLC of Amino Acids on Silica Layers Impregnated with Metal Cations

JPC – Journal of Planar Chromatography – Modern TLC - A water-in-oil microemulsion has been used for the first time as a mobile phase in thin-layer chromatography of amino acids. A new...     

Flow injection chemiluminescence determination of hydrazine by oxidation with chlorinated isocyanurates

A rapid and sensitive flow injection chemiluminescence (CL) method is described for the determination of hydrazine based on the CL generated during its reaction with either sodium dichloroisocyanurate (SDCC) or trichloroisocyanuric acid (TCCA) in alkaline medium. The emission intensity is greatly enhanced if dichlorofluorescein (DCF) as sensitizer is present in the reaction medium. The presence of citrate prevents the precipitation of some cations in the reaction medium and also causes an enhancement in emission intensity. The effect of analytical and flow injection variables on these CL systems and determination of hydrazine are discussed. The optimum parameters for the determination of hydrazine were studied and were found to be the following: SDCC and TCCA both 1x10(-3) M; NaOH, 2x10(-1) M; DCF, 5x10(-6) M; citrate, 1x10(-3) M and flow rate, 3.8 ml min(-1). The optimized method yielded 3sigma detection limits of 2x10(-7) and 3x10(-7) M for hydrazine with SDCC and TCCA oxidants, respectively. The method is simple, fast, sensitive, and precise and was applied to the determination of hydrazine in water samples.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.