Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

One-pot efficient synthesis of disulfides from alkyl halides and alkyl tosylates using thiourea and elemental sulfur without contamination by higher polysulfides

An efficient and odorless synthesis of disulfides from alkyl halides using thiourea and elemental sulfur in the presence of sodium carbonate in wet polyethylene glycol (PEG 200) at 40 °C without contamination by higher polysulfides has been developed. This procedure was then extended to preparation of disulfides from alkyl tosylates at 70 °C.     

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL^?1, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL^?1 with the coefficients of correlation (r ² ) ranging from 0.998 to 0.999.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Simple and Highly Efficient Procedure for Conversion of Aldoximes to Nitriles Using N-(p-Toluenesulfonyl) Imidazole

A facile and efficient method for dehydration of aldoximes into nitriles using N-(p-toluenesulfonyl) imidazole (TsIm) is described. In this method, aldoximes were refluxed with TsIm in the presence of 1,8-diazabicyclo-[5.4.0]undec-7-ene (DBU) in dimethylformamide (DMF) to afford the corresponding nitriles in good yields. This methodology is highly efficient for various structurally diverse aldoximes including aromatic, heteroaromatic, and aliphatic oximes. A plausible mechanism for the conversion of aldoxime into nitriles using TsIm/DBU is explained.     

Highly Efficient Solvent-Free Synthesis of Dihydropyrimidinones Catalyzed by Zinc Oxide

A simple, efficient and practical procedure for the Biginelli reaction using zinc oxid (ZnO) as a novel and reusable catalyst is described under solvent-free conditions in high yields. The use of this agent is characterized by remarkable reactivity, moderate costs, low toxicity and simple work up procedures.     

An Efficient Method for Production and Storage of Unstable S-Nitrosothiols Under Mild and Heterogeneous Condition with Sodium Nitrite and Oxalic Acid Dihydrate

Thiols can be readily converted to their corresponding nitrosothiols with a combination of oxalic acid and sodium nitrite in t-butanol at room temperature (26-30°C). The reaction mixture could be solidified with decreasing its temperature to, 15°C and was stored for several days without any destruction of the nitrosothiols.     

Novel Approach for the Synthesis of N-Substituted-4-(2-methyl-4-oxo-4H-quinazolin-3-yl)-butyramides

A simple and convenient method for the synthesis of N-substituted-4-(2-methyl-4-oxo-4H-quinazolin-3-yl)-butyramides has been reported. Several aromatic and aliphatic amide derivatives of 4-(2-methyl-4-oxo-4H-quinazolin-3-yl)-butyric acid were prepared in 60–81% yields by refluxing it with different phosphazo compounds in toluene for approximately 1 h.     

KG-60-Piperazine as a New Heterogeneous Catalyst for Gewald Three-Component Reaction

Piperazine supported on amorphous silica (KG-60-piperazine) as a basic catalyst acts in the Gewald three-component reaction of some aldehydes and ketones with malononitrile as well as ethyl cyanoacetate. The catalyst shows general utility with a variety of starting carbonyl compounds. Moreover, the catalyst can be reused for four additional cycles without significant loss of the activity.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.